Pre-Processing Based ECG Signal Analysis Using Emerging Tools

The objective of the paper is to count the clear beats (R-peaks or QRS complexes) in the Electrocardiogram (ECG) signal after pre-processing step. Among the three selected techniques, Independent Principal Component Analysis (IPCA), Fractional Fourier Transform (FrFT) and Fractional Wavelet Transform (FrWT) have Sensitivity (Se) of 99.92%, 99.95% and 99.98%, Accuracy (Acc) of 99.88%, 99.93% and 99.96%, Detection Error Rate (DER) of 0.110%, 0.066% and 0.036% along with the disturbance of 2.3%, 2% and 1.7% respectively. The lowest DER in FrWT indicates that it outperforms the IPCA and FrFT. The False Negative plus False Positive (FN + FP) by using the three techniques was 32, 25 and 13 while the output Signal-to-Noise Ratio (SNR) was found to be 24.42, 26.19 and 34.37 dB respectively. These results were figured out on Real Time Database (RT DB). The values of output SNR, Se and Acc were recorded to be 34.37 dB, 99.98% and 99.96% while using FrWT based pre-processing on the data from RT DB. The same technique when used on the data from MIT-BIH arrhythmia Database (MB DB) gave the values of 24.81 dB, 99.96% and 99.93% respectively. It has been observed that all the attributes of the components of ECG signals were preserved when filtered with FrFT. On the other hand, the FrWT segregates the motion artefacts and ECG signal in a better way than FrFT. This is due to the fact that in FrWT decomposition takes place on the signal rotated at a selected angle resulting in less computationally complex decompositions at various levels. It reveals that FrWT retains important biology-related information as the originally recorded ECG signal has.