Effects of absorption pressure and temperature on NH3-H2O-LiBr-TiO2 nanofluid absorption performance and system COP

Adding nanoparticles can enhance the mass and heat transfer of basic fluid, improving the coefficient of per-formance(COP) of the absorption refrigeration system(ARS). However, there are few experimental studies on the effects of absorption pressure and temperature on the absorption performance of nanofluid in an actual ARS. Therefore, the TiO2 nanoparticles are added to the NH3 -H2O - LiBr working fluid. The difference in ammonia mass fraction between the inlet and outlet solution of the absorber (Delta e'a) is compared with when the solution is absorbed saturated (Delta ea). The results indicate that the Delta e'a and system COP increase when the absorption temperature decreases, the absorption pressure increases, or the TiO2 mass fraction increases. The ratio Delta e'a/Delta ea is used to evaluate the absorption efficiency of the nanofluid. The positive effects of nanofluid on the absorption efficiency and COP slightly increase when absorption temperature increases, but decrease when the absorption pressure is greater than 0.31 MPa. For all of our test groups, the greatest improvement in absorption efficiency is 85 %, and the largest improvement in COP is 13.7 %.