Fabrication and characterization of SiC-ZTA ceramic composites by hot pressing

被引：5

作者：

Chai, Jianlong ^{[1
,2
]}

Zhu, Yabin ^{[1
,2
]}

Niu, Lijuan ^{[1
,2
]}

Shen, Tielong ^{[1
,2
]}

Cui, Minghuan ^{[1
,2
]}

Wang, Zhiguang ^{[1
,2
]}

机构：

[1] Chinese Acad Sci, Inst Modern Phys, Lanzhou 730000, Peoples R China

[2] Univ Chinese Acad Sci, Sch Nucl Sci & Technol, Beijing 100049, Peoples R China

来源：

CERAMICS INTERNATIONAL | 2023年 / 49卷 / 20期

基金：

中国国家自然科学基金;

关键词：

Ceramic composites; Mechanical properties; Microstructures; Mechanism; MECHANICAL-PROPERTIES; FRACTURE-TOUGHNESS; ALUMINA; MICROSTRUCTURE; BEHAVIOR;

D O I：

10.1016/j.ceramint.2023.07.249

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Al2O3/ZrO2/SiC ceramic composites with different SiC contens have been prepared by hot pressuring. The effect of SiC content on the microstructure and mechanical properties of composites have been studied. The results show that SiC has obvious grain refinement effect on ZTA ceramics and change the fracture mode of the matrix from intergranular fracture to transgranular fracture. Simultaneously, it has been found that the mechanical properties of the material are significantly enhanced in comparison with ZTA matrix. The highest strength is acquired at 10% SiC content, the flexural strength and toughness are obtained when the SiC content is 15 vol%, and the values are 18.86 GPa, 1262 MPa and 6.13 MPa m1/2, respectively. The mechanisms of hardening, strengthening and toughening have been discussed.

引用

页码：32799 / 32807

页数：9

共 50 条

[31] FABRICATION OF Ti/SiC MMCs BY VACUUM HOT PRESSING WITH AID OF HYDROGEN
C.H. Zhou
K. Yang and Y.X. Lu (Liaoning Key Lab for Hydrogen and Materich
ActaMetallurgicaSinica(EnglishLetters), 1998, (04) : 307 - 312
[32] TEM investigation and fracture behavior of SiC/SiC composites fabricated by hot-pressing
Yano, T.
Yamamoto, Y.
Yoshida, K.
Key Engineering Materials, 1999, 166 : 135 - 138
[33] TEM investigation and fracture behavior of SiC SiC composites fabricated by hot-pressing
Yano, T
Yamamoto, Y
Yoshida, K
TIME DEPENDENT MECHANICAL RESPONSE OF ENGINEERING CERAMICS: FROM PICO-SECOND TO MILLION YEARS, 1999, 4 : 135 - 138
[34] Fabrication, processing, and characterization of braided, continuous SiC fiber-reinforced/CVI SiC matrix ceramic composites
Jenkins, MG
Mello, MD
MATERIALS AND MANUFACTURING PROCESSES, 1996, 11 (01) : 99 - 118
[35] Hot-pressing and characterization of TiB2-SiC composites with different amounts of BN additive
Yang, Xiaowei
Chen, Jian
Xing, Rong
Babapoor, Aziz
CERAMICS INTERNATIONAL, 2021, 47 (12) : 16652 - 16660
[36] Hot isostatic pressing of SiC particulate reinforced metal matrix composites
Loh, NL
Wei, Z
Xu, Z
HOT ISOSTATIC PRESSING, CONFERENCE PROCEEDINGS, 1996, : 187 - 192
[37] Properties of SiCf/SiC composites fabricated by slurry infiltration and hot pressing
Yonathan, P.
Lee, J. -H.
Kim, H. -T.
Yoon, D. -H.
MATERIALS SCIENCE AND TECHNOLOGY, 2011, 27 (01) : 257 - 263
[38] Hot-Pressing Sintering Behavior and Properties of AlON/SiC Composites
Zhao, Xiaojun
Zhang, Ning
Ru, Hongqiang
Wang, Xiaoyang
Kan, Hongmin
CHINESE CERAMICS COMMUNICATIONS, 2010, 105-106 : 184 - +
[39] Reactive hot pressing of SiC-ZrC composites at low temperature
Wang, Kun
Zhou, Youfu
Xu, Wentao
Xiang, Ming
Li, Xiaoqiang
Wang, Zhiguang
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2017, 37 (02) : 849 - 854
[40] Mechanical properties of electroconductive ceramic composites produced by hot isostatic pressing
Klein, R
Desmaison-Brut, M
Medri, V
Feldhoff, A
Desmaison, J
EURO CERAMICS VIII, PTS 1-3, 2004, 264-268 : 881 - 884

← 1 2 3 4 5 →