Fabrication and characterization of SiC-ZTA ceramic composites by hot pressing

被引：5
|
作者：
Chai, Jianlong [1 ,2 ]
Zhu, Yabin [1 ,2 ]
Niu, Lijuan [1 ,2 ]
Shen, Tielong [1 ,2 ]
Cui, Minghuan [1 ,2 ]
Wang, Zhiguang [1 ,2 ]
机构：
[1] Chinese Acad Sci, Inst Modern Phys, Lanzhou 730000, Peoples R China
[2] Univ Chinese Acad Sci, Sch Nucl Sci & Technol, Beijing 100049, Peoples R China
来源：
CERAMICS INTERNATIONAL | 2023年 / 49卷 / 20期
基金：
中国国家自然科学基金;
关键词：
Ceramic composites; Mechanical properties; Microstructures; Mechanism; MECHANICAL-PROPERTIES; FRACTURE-TOUGHNESS; ALUMINA; MICROSTRUCTURE; BEHAVIOR;
D O I：
10.1016/j.ceramint.2023.07.249
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Al2O3/ZrO2/SiC ceramic composites with different SiC contens have been prepared by hot pressuring. The effect of SiC content on the microstructure and mechanical properties of composites have been studied. The results show that SiC has obvious grain refinement effect on ZTA ceramics and change the fracture mode of the matrix from intergranular fracture to transgranular fracture. Simultaneously, it has been found that the mechanical properties of the material are significantly enhanced in comparison with ZTA matrix. The highest strength is acquired at 10% SiC content, the flexural strength and toughness are obtained when the SiC content is 15 vol%, and the values are 18.86 GPa, 1262 MPa and 6.13 MPa m1/2, respectively. The mechanisms of hardening, strengthening and toughening have been discussed.
引用
收藏
页码：32799 / 32807
页数：9
相关论文
共 50 条
  • [21] Characterization of fiber-reinforced SiC composites by precursor-pyrolysis and hot-pressing
    He, XB
    Qu, XH
    Zhang, CR
    Zhou, XG
    HIGH-PERFORMANCE CERAMICS III, PTS 1 AND 2, 2005, 280-283 : 1305 - 1308
  • [22] THE HOT PRESSING OF CARBIDES, METAL-CERAMIC COMPOSITES, AND OXIDES
    CRANDALL, WB
    TINKLEPAUGH, JR
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1962, 109 (08) : C211 - C211
  • [23] Effects of ZrC content on the microstructure and mechanical property of ZrC/ZTA composites consolidated by hot pressing
    Li, Shufen
    Zhu, Yabin
    Chai, Jianlong
    Liu, Yiwen
    Niu, Lijuan
    Gao, Xing
    Jin, Peng
    Shen, Tielong
    Cui, Minghuan
    Wang, Zhiguang
    Xie, Erqing
    JOURNAL OF ALLOYS AND COMPOUNDS, 2021, 860 (860)
  • [24] Fabrication of FeAl/TiC composites through reactive hot pressing
    Feng-xiao Liu
    Yong Liu
    Bai-yun Huang
    Yue-hui He
    Ke-chao Zhou
    Journal of Central South University of Technology, 2004, 11 : 343 - 347
  • [25] The response of SiC fibres to vacuum plasma spraying and vacuum hot pressing during the fabrication of titanium matrix composites
    Baker, AM
    Grant, PS
    Jenkins, ML
    JOURNAL OF MICROSCOPY, 1999, 196 : 162 - 174
  • [26] Fabrication of FeAl/TiC composites through reactive hot pressing
    Liu, FX
    Liu, Y
    Huang, BY
    He, YH
    Zhou, KC
    JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY, 2004, 11 (04): : 343 - 347
  • [27] The response of SiC fibres to vacuum plasma spraying and vacuum hot pressing during the fabrication of titanium matrix composites
    Baker, A.M.
    Grant, P.S.
    Jenkins, M.L.
    Journal of Microscopy, 1999, 196 (02): : 162 - 174
  • [28] Fabrication of FeAl/TiC composites through reactive hot pressing
    刘峰晓
    刘咏
    黄伯云
    贺跃辉
    周科朝
    Journal of Central South University of Technology(English Edition), 2004, (04) : 343 - 347
  • [29] Fabrication of laminated SiCw/SiC ceramic composites by CVI
    Xie, Yupeng
    Cheng, Laifei
    Li, Liangjun
    Mei, Hui
    Zhang, Litong
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2013, 33 (10) : 1701 - 1706
  • [30] Fabrication and Hardening Treatment for SiC/AlN Ceramic Composites
    Jin, Hai-yun
    Li, Ying
    Jia, Xiang-ya
    Qiao, Guan-jun
    ECO-MATERIALS PROCESSING AND DESIGN X, 2009, 620-622 : 363 - +
12345