Fabrication and characterization of SiC-ZTA ceramic composites by hot pressing

被引：5
|
作者：
Chai, Jianlong [1 ,2 ]
Zhu, Yabin [1 ,2 ]
Niu, Lijuan [1 ,2 ]
Shen, Tielong [1 ,2 ]
Cui, Minghuan [1 ,2 ]
Wang, Zhiguang [1 ,2 ]
机构：
[1] Chinese Acad Sci, Inst Modern Phys, Lanzhou 730000, Peoples R China
[2] Univ Chinese Acad Sci, Sch Nucl Sci & Technol, Beijing 100049, Peoples R China
来源：
CERAMICS INTERNATIONAL | 2023年 / 49卷 / 20期
基金：
中国国家自然科学基金;
关键词：
Ceramic composites; Mechanical properties; Microstructures; Mechanism; MECHANICAL-PROPERTIES; FRACTURE-TOUGHNESS; ALUMINA; MICROSTRUCTURE; BEHAVIOR;
D O I：
10.1016/j.ceramint.2023.07.249
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Al2O3/ZrO2/SiC ceramic composites with different SiC contens have been prepared by hot pressuring. The effect of SiC content on the microstructure and mechanical properties of composites have been studied. The results show that SiC has obvious grain refinement effect on ZTA ceramics and change the fracture mode of the matrix from intergranular fracture to transgranular fracture. Simultaneously, it has been found that the mechanical properties of the material are significantly enhanced in comparison with ZTA matrix. The highest strength is acquired at 10% SiC content, the flexural strength and toughness are obtained when the SiC content is 15 vol%, and the values are 18.86 GPa, 1262 MPa and 6.13 MPa m1/2, respectively. The mechanisms of hardening, strengthening and toughening have been discussed.
引用
收藏
页码：32799 / 32807
页数：9
相关论文
共 50 条
  • [1] Fabrication of Al/ceramic composites by hot pressing
    Ueda, Yoshinobu
    Suzuki, Yoshikazu
    Shimokawa, Katsuyoshi
    Murakami, Kazuyuki
    Journal of the Japan Society of Powder and Powder Metallurgy, 1995, 42 (03)
  • [2] Fabrication of Cf/SiC composites by hot-pressing
    Ding, Yusheng
    Dong, Shaoming
    Zhou, Qing
    Jiang, Dongliang
    ADVANCES IN COMPOSITE MATERIALS AND STRUCTURES, PTS 1 AND 2, 2007, 334-335 : 1045 - +
  • [3] The studies on SiC/SiC composites by hot pressing
    Dong, SM
    Ding, YS
    Huang, ZR
    Jiang, DL
    Katoh, Y
    Kohyama, A
    RARE METAL MATERIALS AND ENGINEERING, 2003, 32 : 334 - 337
  • [4] Characterization and origin of failure of SiC/ZTA composites
    Naga, S. M.
    El-Maghraby, H. F.
    Elgamhoudy, M.
    Saleh, M. A.
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2018, 73 : 53 - 57
  • [5] Microstructure and mechanical properties of TiB2-SiC ceramic composites by Reactive Hot Pressing
    Zhao, Guolong
    Huang, Chuanzhen
    Liu, Hanlian
    Zou, Bin
    Zhu, Hongtao
    Wang, Jun
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2014, 42 : 36 - 41
  • [6] Fabrication of two-dimensional SiC/SiC composites by hot-pressing and their mechanical, interfacial and thermal properties
    Yoshida, K
    Hashimoto, K
    Toda, Y
    Udagawa, S
    Yano, T
    ADVANCED CERAMICS AND COMPOSITES, 2003, 247 : 191 - 194
  • [7] Comparative evaluation of extrusion and hot isostatic pressing as fabrication techniques for Al-SiC composites
    Niklas, A.
    Froyen, L.
    Delaey, L.
    Buekenhout, L.
    Materials Science and Engineering A, 1991, A135 (1-2) : 225 - 229
  • [8] HOT-PRESSING OF SIC-TIC COMPOSITES
    ENDO, H
    UEKI, M
    KUBO, H
    JOURNAL OF MATERIALS SCIENCE, 1990, 25 (05) : 2503 - 2506
  • [9] CERAMIC-METAL COMPOSITES BY REACTIVE HOT PRESSING
    CHAKLADER, AC
    SHETTY, MN
    TRANSACTIONS OF THE METALLURGICAL SOCIETY OF AIME, 1965, 233 (07): : 1440 - +
  • [10] Hot Pressing of Boron Carbide Based Ceramic Composites
    Svec, Pavol
    Gabrisova, Zuzana
    Brusilova, Alena
    MANUFACTURING TECHNOLOGY, 2020, 20 (03): : 394 - 400
12345