Fabrication and optimization of AA5754/SiC nanocomposites via friction-stir processing (FSP)

被引:1
|
作者
Rezaei, Morteza [1 ]
Davari, Ali [1 ]
Mirhosseini, Seyyed Saber [1 ]
Shamsipur, Ali [1 ]
机构
[1] Amirkabir Univ Technol, Dept Mat Sci & Engn, Tehran, Iran
关键词
nanocomposites; aluminum surface composite (ASC); 5754 aluminum alloys; friction-stir processing (FSP); SiC nanoparticles; SILICON-CARBIDE; MECHANICAL-PROPERTIES; CORROSION BEHAVIOR; ALUMINUM; PERFORMANCE; COMPOSITES; PARAMETERS;
D O I
10.1051/metal/2023015
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
Metal-matrix composites (MMC) are cost-effective alternatives to steel and iron resources. This research investigates the properties of the nanocomposites created by SiC nanoparticles. AA5754 was chosen as a matrix and fabricated by friction-stir processing (FSP). The effects of input parameters, including rotational/traverse speeds, number of passes on the microhardness, and topography, were studied through the response surface methodology. Each parameter was selected in three levels, and other parameters were considered constant. To examine the effect of SiC nanoparticles, optical microscopy (OM), SEM, and microhardness tests were used. Due to the distribution of SiC nanoparticles and homogeneous microstructure coinciding with high microhardness, the optimal rotational speed, traverse speed, and the number of passes at 500 rpm, 20 mm/min, and 3 were obtained, respectively. Also, the average microhardness profile and the average grain size in the SZ region for the optimal sample were equal to 68 Vickers and 1.5 Microns, respectively. The results showed that increasing the number of passes accrued appropriate nanoparticle distribution. During operation, various mechanisms occurred, such as nucleation during recrystallization and placement of SiC nanoparticles at the grain boundaries, which prevent grain boundary migration and inhibit grain growth.
引用
收藏
页数:13
相关论文
共 50 条
  • [41] Friction Stir Processing of AA3105/SiC Composites Constructed Through the Sandwich Method: The Effects of FSP Variables
    Houshyar, Meraj
    Nourouzi, Salman
    Jamshidi Aval, Hamed
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2021, 74 (02) : 429 - 438
  • [42] Optimization of process parameters for friction stir processing (FSP) of AA8090/boron carbide surface composites
    Adiga, Karthik
    Herbert, Mervin A.
    Rao, Shrikantha S.
    Shettigar, Arun Kumar
    WELDING IN THE WORLD, 2024, 68 (10) : 2683 - 2700
  • [43] Producing of AZ91/SiC composite by friction stir processing (FSP)
    Asadi, Parviz
    Faraji, Ghader
    Besharati, Mohammad K.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2010, 51 (1-4): : 247 - 260
  • [44] Effect of double-sided friction stir welding on the mechanical and microstructural characteristics of AA5754 aluminium alloy
    Celik, Sare
    Tolun, Fatmagul
    MATERIALS TESTING, 2021, 63 (09) : 829 - 835
  • [45] Study of friction stir butt welding between thin plates of AA5754 and mild steel for automotive applications
    Karakizis, P. N.
    Pantelis, D. I.
    Dragatogiannis, D. A.
    Bougiouri, V. D.
    Charitidis, C. A.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 102 (9-12): : 3065 - 3076
  • [46] Producing of AZ91/SiC composite by friction stir processing (FSP)
    Parviz Asadi
    Ghader Faraji
    Mohammad K. Besharati
    The International Journal of Advanced Manufacturing Technology, 2010, 51 : 247 - 260
  • [47] Correction to: Investigation of internal defects and premature fracture of dissimilar refill friction stir spot welds of AA5754 and AA6061
    Antonio Cappelletti Ferreira
    Leonardo Contri Campanelli
    Uceu Fuad Hasan Suhuddin
    Nelson Guedes de Alcântara
    Jorge Fernandez dos Santos
    The International Journal of Advanced Manufacturing Technology, 2020, 110 : 1677 - 1677
  • [48] Composite Fabrication Via Friction Stir Processing
    Sun, Ning
    Apelian, Diran
    LIGHT METALS TECHNOLOGY V, 2011, 690 : 125 - 128
  • [49] Control factor optimization for friction stir processing of AA8090/SiC surface composites
    Adiga, Karthik
    Herbert, Mervin A.
    Rao, Shrikantha S.
    Shettigar, Arun Kumar
    Journal of Alloys and Metallurgical Systems, 2024, 8
  • [50] Influence of friction stir processing on wear behavior of nanosized SiC reinforced AA5083 nanocomposites developed by stir casting
    Rajan, Gaurav
    Kumar, Atul
    Mula, Suhrit
    JOURNAL OF MANUFACTURING PROCESSES, 2025, 141 : 1631 - 1649