Fabrication and optimization of AA5754/SiC nanocomposites via friction-stir processing (FSP)

被引:1
|
作者
Rezaei, Morteza [1 ]
Davari, Ali [1 ]
Mirhosseini, Seyyed Saber [1 ]
Shamsipur, Ali [1 ]
机构
[1] Amirkabir Univ Technol, Dept Mat Sci & Engn, Tehran, Iran
关键词
nanocomposites; aluminum surface composite (ASC); 5754 aluminum alloys; friction-stir processing (FSP); SiC nanoparticles; SILICON-CARBIDE; MECHANICAL-PROPERTIES; CORROSION BEHAVIOR; ALUMINUM; PERFORMANCE; COMPOSITES; PARAMETERS;
D O I
10.1051/metal/2023015
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
Metal-matrix composites (MMC) are cost-effective alternatives to steel and iron resources. This research investigates the properties of the nanocomposites created by SiC nanoparticles. AA5754 was chosen as a matrix and fabricated by friction-stir processing (FSP). The effects of input parameters, including rotational/traverse speeds, number of passes on the microhardness, and topography, were studied through the response surface methodology. Each parameter was selected in three levels, and other parameters were considered constant. To examine the effect of SiC nanoparticles, optical microscopy (OM), SEM, and microhardness tests were used. Due to the distribution of SiC nanoparticles and homogeneous microstructure coinciding with high microhardness, the optimal rotational speed, traverse speed, and the number of passes at 500 rpm, 20 mm/min, and 3 were obtained, respectively. Also, the average microhardness profile and the average grain size in the SZ region for the optimal sample were equal to 68 Vickers and 1.5 Microns, respectively. The results showed that increasing the number of passes accrued appropriate nanoparticle distribution. During operation, various mechanisms occurred, such as nucleation during recrystallization and placement of SiC nanoparticles at the grain boundaries, which prevent grain boundary migration and inhibit grain growth.
引用
收藏
页数:13
相关论文
共 50 条
  • [1] Sustainability analysis of friction stir welding of AA5754 sheets
    Bevilacqua, Maurizio
    Ciarapica, Filippo Emanuele
    D'Orazio, Alessio
    Forcellese, Archimede
    Simoncini, Michela
    10TH CIRP CONFERENCE ON INTELLIGENT COMPUTATION IN MANUFACTURING ENGINEERING - CIRP ICME '16, 2017, 62 : 523 - 528
  • [2] Analyzing dissimilar friction stir welding of AA5754/AA7075
    Şefika Kasman
    Zafer Yenier
    The International Journal of Advanced Manufacturing Technology, 2014, 70 : 145 - 156
  • [3] Analyzing dissimilar friction stir welding of AA5754/AA7075
    Kasman, Sefika
    Yenier, Zafer
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2014, 70 (1-4): : 145 - 156
  • [4] Gradient composite coatings on AA5754 using friction stir process
    Tosun, Gul
    Ozler, Latif
    Ozcan, Mehmet Erbil
    SURFACE ENGINEERING, 2020, 36 (05) : 447 - 455
  • [5] FRICTION STIR BUTT WELDABILITY OF DISSIMILAR ALLOYS AA5754 AND AA1050
    Karagoz, Idris
    Cakir, Recep
    Coban, Ozan
    Boumerzoug, Zakaria
    SURFACE REVIEW AND LETTERS, 2023, 30 (09)
  • [6] Process parameters optimization for enhanced microhardness of AA 6061/SiC surface composites fabricated via Friction Stir Processing (FSP)
    Rathee, Sandeep
    Maheshwari, Sachin
    Siddiquee, Arshad Noor
    Srivastava, Manu
    Sharma, Satish Kumar
    MATERIALS TODAY-PROCEEDINGS, 2016, 3 (10) : 4151 - 4156
  • [7] Fabrication and optimization of AA7075 matrix surface composites using Taguchi technique via friction stir processing (FSP)
    Butola, Ravi
    Ranganath, M. S.
    Murtaza, Qasim
    ENGINEERING RESEARCH EXPRESS, 2019, 1 (02):
  • [8] Investigation of Weldability in Friction Stir Welding of Aluminum Alloys AA5754 and AA2024
    Kilic, Suleyman
    Ozturk, Fahrettin
    Demirdogen, Mehmet Fatih
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024,
  • [9] Optimization of process parameters for producing AA6061/SiC nanocomposites by friction stir processing
    Salehi, M.
    Saadatmand, M.
    Mohandesi, J. Aghazadeh
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2012, 22 (05) : 1055 - 1063
  • [10] Realization of Friction Stir Welding of Aluminum Alloy AA5754 Using a Ceramic Tool
    Sprigode, Toni
    Gester, Andreas
    Wagner, Guntram
    Degenhardt, Ulrich
    METALS, 2024, 14 (09)