Computing in-memory reconfigurable (accurate/approximate) adder design with negative capacitance FET 6T-SRAM for energy efficient AI edge devices

Computing in-memory (CiM) is an alternative to von-Neumann architectures for energy efficient AI edge computing architectures with CMOS scaling. Approximate computing in-memory (ACiM) techniques have also been recently proposed to further increase the energy efficiency of such architectures. In the first part of the work, a negative capacitance FET (NCFET) based 6T-SRAM CiM accurate full adder has been proposed, designed and performance benchmarked with equivalent baseline 40 nm CMOS design. Due to the steep slope characteristics of NCFET, at an increased ferroelectric layer thickness, T fe of 3 nm, the energy consumption of the proposed accurate NCFET based CiM design is similar to 82.48% lower in comparison to the conventional/Non CiM full adder design and similar to 85.27% lower energy consumption in comparison to the equivalent baseline CMOS CiM accurate full adder design at V DD = 0.5 V. This work further proposes a reconfigurable computing in-memory NCFET 6T-SRAM full adder design (the design which can operate both in accurate and approximate modes of operation). NCFET 6T-SRAM reconfigurable full adder design in accurate mode has similar to 4.19x lower energy consumption and similar to 4.47x lower energy consumption in approximation mode when compared to the baseline 40 nm CMOS design at V DD = 0.5 V, making NCFET based approximate CiM adder designs preferable for energy efficient AI edge CiM based computing architectures for DNN processing.