Single fuzzy inference based fault detection and classification protection scheme for different types of short circuit faults on double circuit transmission lines

An intelligent protection scheme based on the single fuzzy inference system and discrete Fourier transform is proposed for the faulty phase detection and classification of faults on the mutually coupled double circuit transmission lines. This proposed protection technique uses the magnitude of the pre-processed current information of the sending end bus only. This is implemented in the MATLAB/Simulink environment on a 400 kV, 50 Hz, and 300 km double circuit power system model. The efficacy of the proposed scheme has been tested by performing a wide range of simulation studies concerning different types of faults (common short circuit faults, cross-country and evolving faults, and high impedance faults) and typical fault scenarios (current transformer saturation, noisy environment, and fault during power swing conditions) with variations in different fault parameters and operating conditions. The results presented confirm that the proposed method detects/classifies all the faults within one cycle time and is reliable with a detection/classification accuracy of 99.75%. It is immune to variations in fault parameters, and different operating conditions, and is not affected by the zero sequence mutual impedance. It does not require any training and communication link. Further, the performance is also appraised with other training-based protection schemes.