Electrochemical Sulfite-Ion Sensor Using Sm2CuO4-Based Layered Perovskite-Type Oxide Thick Film

被引：1

作者：

Shinoda, Yasunari ^{[1
]}

Takase, Satoko ^{[1
]}

Shimizu, Youichi ^{[1
]}

机构：

[1] Kyushu Inst Technol, Dept Appl Chem, Kitakyushu, Fukuoka 8048550, Japan

来源：

IEEJ TRANSACTIONS ON ELECTRICAL AND ELECTRONIC ENGINEERING | 2023年 / 18卷 / 02期

关键词：

Sm1.9Ce0.1CuO4; thick film; sulfite ion; electrochemical sensor;

D O I：

10.1002/tee.23724

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

Sm2-xCexBO4 (x = 0, 0.1; B = Fe, Cu) thick films were prepared by an electrophoretic deposition method and applied as sulfite-ion (SO32-) sensors. Among the oxides, Sm1.9Ce0.1CuO4 showed good amperometric response to sulfite ions in the ion concentration range between 1.0 x 10(-5) and 1.0 x 10(-4) M at 30 degrees C. The applied potential to the electrode should be one of the key factors of high selectivity, and the relatively low potential of +0.2 V versus Ag/AgCl was found to be optimal for the detection of sulfite ions. Good sulfite-ion sensing should be enabled by Cu+ in Sm1.9Ce0.1CuO4 where SO32- is easily adsorbed. (C) 2022 Institute of Electrical Engineers of Japan. Published by Wiley Periodicals LLC.

引用

页码：300 / 302

页数：3

共 43 条

[31] Pd-Doped Tin-Oxide-Based Thick-Film Sensor Array for Detection of H2, CH4, and CO
Meenakshi Choudhary
V. N. Mishra
R. Dwivedi
Journal of Electronic Materials, 2013, 42 : 2793 - 2802
[32] Selective detection of NO using the perovskite-type oxide LaMO3 (M = Cr, Mn, Fe, Co, and Ni) as the electrode material for yttrium-stabilized zirconia-based electrochemical sensors
Sun, Hongqian
Song, Jing
Shi, Pengfei
Cheng, Zhenqian
Tian, Liangliang
Zhou, Mingjun
Qi, Tao
JOURNAL OF MATERIALS CHEMISTRY A, 2024, 12 (29) : 18234 - 18247
[33] A Layered Electrochemical Sensor for Epinephrine Based on a Nitrogen-Doped Reduced Graphene Oxide-ZnFe2O4/β-Cyclodextrin-Modified Platinum Electrode
Sethu Madhavan, Arya
Kakkaraparambil Vijayan, Jishnu
Rajith, Leena
CHEMISTRYSELECT, 2022, 7 (44):
[34] Preparation and characterization of a layered perovskite-type organic-inorganic hybrid compound based on (C6H4)2N (CH2)6NH3Cl
Wu, Gang
Cheng, Siyuan
Deng, Meng
Zheng, Yingying
Chen, Hongzheng
Wang, Mang
SYNTHETIC METALS, 2009, 159 (23-24) : 2425 - 2429
[35] A Layered Electrochemical Sensor for Epinephrine Based on a Nitrogen-Doped Reduced Graphene Oxide-ZnFe2O4/beta-Cyclodextrin-Modified Platinum Electrode
Madhavan, Arya Sethu
Vijayan, Jishnu Kakkaraparambil
Rajith, Leena
CHEMISTRYSELECT, 2022, 7 (44):
[36] Assessment of Oxidative Stress by Detection of H2O2 in Rye Samples Using a CuO- and Co3O4-Nanostructure-Based Electrochemical Sensor
Mihailova, Irena
Krasovska, Marina
Sledevskis, Eriks
Gerbreders, Vjaceslavs
Mizers, Valdis
Ogurcovs, Andrejs
CHEMOSENSORS, 2023, 11 (10)
[37] Removal of nitric oxide (NO) by perovskite-type composite catalytic thick film, La0.6Sr0.4Co0.2Fe0.8O3-δ and gadolinia-doped ceria electrolyte Gd0.2Ce0.8O2-δ
Hwang, HJ
Moon, JW
Moon, J
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2005, 88 (01) : 79 - 84
[38] Electrochemical determination of 2,4,6-trinitrophenol using a hybrid film composed of a copper-based metal organic framework and electroreduced graphene oxide
Wang, Yong
Cao, Wei
Wang, Luyao
Zhuang, Qianfen
Ni, Yongnian
MICROCHIMICA ACTA, 2018, 185 (06)
[39] Electrochemical determination of 2,4,6-trinitrophenol using a hybrid film composed of a copper-based metal organic framework and electroreduced graphene oxide
Yong Wang
Wei Cao
Luyao Wang
Qianfen Zhuang
Yongnian Ni
Microchimica Acta, 2018, 185
[40] 6% Efficiency Cu2ZnSnS4-based thin film solar cells using oxide precursors by open atmosphere type CVD
Washio, Tsukasa
Shinji, Tomokazu
Tajima, Shin
Fukano, Tatsuo
Motohiro, Tomoyoshi
Jimbo, Kazuo
Katagiri, Hironori
JOURNAL OF MATERIALS CHEMISTRY, 2012, 22 (09) : 4021 - 4024

← 1 2 3 4 5 →