Historical review and future prospect for researches on very high cycle fatigue of metallic materials

被引:14
|
作者
Sakai, Tatsuo [1 ,2 ]
机构
[1] Ritsumeikan Univ, Res Org Sci & Technol, Kusatsu, Japan
[2] Ritsumeikan Univ, Res Org Sci & Technol, 525 8577 Japan, 1-1-1 Nojihigashi, Kusatsu, Shiga 5258577, Japan
关键词
crack initiation mechanism; duplex S-N characteristics; future prospect; historical review; metallic materials; very high cycle fatigue; SUBSURFACE CRACK INITIATION; ROLLING-CONTACT FATIGUE; COMPETING FAILURE MODES; HIGH-STRENGTH STEELS; CR-NI-STEELS; BEARING STEEL; VHCF REGIME; PROPAGATION PROPERTIES; DEFORMATION-BEHAVIOR; FRACTURE-MECHANICS;
D O I
10.1111/ffe.13885
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Since the first paper on the fatigue of metallic materials by J. Albert in 1837, tremendous numbers of papers have been published in various journals by many researchers all over the world. Based on such a long history, several papers on the very high cycle fatigue (VHCF) in the life-time longer than 10(7) cycles had appeared in some journals during the period of 1980's. One characteristic finding in these works is the fact that the metallic material can fail even at the stress level lower than the conventional fatigue limit. This fact means that the conventional fatigue design of mechanical structures cannot give the safety of the practical products in the very high cycle regime. Due to this fact, fatigue properties of structural materials in very long life regime has become an important subject; and a lot of studies have been carried out, and many important results have been accumulated until now. Typical aspects on VHCF property are summarized as follows: (1) the fatigue crack tends to occur around the interior inclusion, (2) fine granular area (FGA) is formed around such an inclusion, and (3) duplex S-N characteristics appear in the VHCF regime. In this paper, a brief historical review together with the future prospect on the very high cycle fatigue of metallic materials is attempted for the sake of reference to facilitate the research in this area.
引用
收藏
页码:1217 / 1255
页数:39
相关论文
共 50 条
  • [1] Review on Surface Failure Mode of Metallic Materials in Very High Cycle Fatigue Regime
    Wang, Dongming
    Li, Wei
    Wang, Ping
    Chu, Weixian
    ADVANCES IN MATERIALS AND MATERIALS PROCESSING, PTS 1-3, 2013, 652-654 : 1295 - +
  • [2] A review on fatigue fracture modes of structural metallic materials in very high cycle regime
    Sakai, Tatsuo
    Nakagawa, Akiyoshi
    Oguma, Noriyasu
    Nakamura, Yuki
    Ueno, Akira
    Kikuchi, Shoichi
    Sakaida, Akiyoshi
    INTERNATIONAL JOURNAL OF FATIGUE, 2016, 93 : 339 - 351
  • [3] Damage behavior of metallic materials under very high cycle fatigue
    Chai, Guocai
    ADVANCES IN FRACTURE AND DAMAGE MECHANICS VI, 2007, 348-349 : 237 - 240
  • [4] Titanium Alloy Materials with Very High Cycle Fatigue: A Review
    Wu, Yuhang
    He, Weifeng
    Ma, Haitao
    Nie, Xiangfan
    Liang, Xiaoqing
    Pan, Jile
    Wang, Shiguang
    Shang, Min
    Cheng, Li
    MATERIALS, 2024, 17 (12)
  • [5] Effects of specimen size on fatigue life of metallic materials in high-cycle and very-high-cycle fatigue regimes
    Sun, C.
    Zhang, X.
    Liu, X.
    Hong, Y.
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2016, 39 (06) : 770 - 779
  • [6] A probabilistic model on crack initiation modes of metallic materials in very high cycle fatigue
    Nakagawa, Akiyoshi
    Sakai, Tatsuo
    Harlow, D. Gary
    Oguma, Noriyasu
    Nakamura, Yuki
    Ueno, Akira
    Kikuchi, Shoichi
    Sakaida, Akiyoshi
    21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21), 2016, 2 : 1199 - 1206
  • [7] A simulation on microstructure sensitivity to very-high-cycle fatigue behavior of metallic materials
    Lei, Zhengqiang
    Xie, Jijia
    Zhao, Aiguo
    Hong, Youshi
    ISAB-2010 - FIRST INTERNATIONAL SYMPOSIUM ON ARCHIMEDES BRIDGE, 2010, 4 : 225 - 232
  • [8] Effects of stress ratio on crack growth rate and fatigue strength for high cycle and very-high-cycle fatigue of metallic materials
    Sun, Chengqi
    Lei, Zhengqiang
    Hong, Youshi
    MECHANICS OF MATERIALS, 2014, 69 (01) : 227 - 236
  • [9] Very high cycle fatigue (VHCF) response of additively manufactured materials: A review
    Caivano, Riccardo
    Tridello, Andrea
    Chiandussi, Giorgio
    Qian, Guian
    Paolino, Davide
    Berto, Filippo
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2021, 44 (11) : 2919 - 2943
  • [10] ESSENTIAL CHARACTERISTICS AND INFLUENTIAL FACTORS FOR VERY-HIGH-CYCLE FATIGUE BEHAVIOR OF METALLIC MATERIALS
    Hong Youshi
    Zhao Aiguo
    Qian Gui'an
    ACTA METALLURGICA SINICA, 2009, 45 (07) : 769 - 780