Study on performance and fractal characteristics of high-strength manufactured sand concrete with different MB values

被引:1
|
作者
Zhou, Hailong [1 ]
Ge, Chenglong [1 ]
Chen, Yan [1 ]
Song, Xingfang [2 ]
机构
[1] Inner Mongolia Agr Univ, Coll Water Resources & Civil Engn, Hohhot, Peoples R China
[2] Inner Mongolia Rd & Bridge Grp Co Ltd, Hohhot, Peoples R China
基金
中国国家自然科学基金;
关键词
MB value; manufactured sand concrete; working performance; durability; fractal characteristics; STONE DUST; SEM;
D O I
10.3389/feart.2023.1140038
中图分类号
P [天文学、地球科学];
学科分类号
07 ;
摘要
The mud powder in the manufactured sand will have an influence on the indicators of the manufactured sand concrete (MSC), and the methylene blue value can quantitatively indicate the mud powder content. To demonstrate the impact of MB values on the performance and microstructural characteristics of the manufactured sand concrete, the paper designed five high-strength MSC proportions at five MB values by controlling the clay powder content. On this basis, the workability, chloride migration coefficient, relative dynamic modulus of elasticity (P), mass loss rate (eta), and dry shrinkage rate of MSC concrete were tested under five mix ratios, and the relationship between concrete microstructure, fractal characteristics, and compressive strength (f (cc)) was analyzed by combining SEM technology and fractal theory. The experiment showed that: the higher the MB, the lower the fluidity of the MSC, and the cohesiveness gradually increases, while the water retention remains basically unchanged. In addition, the chloride migration coefficient gradually increases, the P after 300 freeze-thaw cycles first increases and then gradually decreases, while the eta and drying shrinkage first decreases and then gradually increases, and the MB value corresponding to the turning point of these three changes are all 1.10. With MB values of 0.85 and 1.10, the degree of hydration of MSC is higher and the overall structural compactness is better. The higher the MB value, the more inadequate the hydration of concrete, and the mineral components such as fly ash that have not been hydrated inside gradually increase, which leads to the gradual decrease of the overall structure compactness. In addition, when the MB value is small, the SEM image texture of concrete is relatively simple, the fractal dimension value is small, and the corresponding f (cc) is large. When the MB value is large, the texture of the SEM image is complex, the fractal dimension is large, and the corresponding f (cc) is small.
引用
收藏
页数:10
相关论文
共 50 条
  • [42] SOME CHARACTERISTICS OF HIGH-STRENGTH STRUCTURAL CONCRETE
    BICKLEY, JA
    RYELL, J
    ROGERS, C
    HOOTON, RD
    CANADIAN JOURNAL OF CIVIL ENGINEERING, 1991, 18 (05) : 885 - 889
  • [43] CHARACTERISTICS OF LIGHTWEIGHT AGGREGATES FOR HIGH-STRENGTH CONCRETE
    ZHANG, MH
    GJORV, OE
    ACI MATERIALS JOURNAL, 1991, 88 (02) : 150 - 158
  • [44] High-strength concrete with different fine aggregate
    Donza, H
    Cabrera, O
    Irassar, EF
    CEMENT AND CONCRETE RESEARCH, 2002, 32 (11) : 1755 - 1761
  • [45] Bond characteristics of high-strength lightweight concrete
    Mitchell, David W.
    Marzouk, H.
    ACI STRUCTURAL JOURNAL, 2007, 104 (01) : 22 - 29
  • [46] High-strength concrete properties derived from compressive strength values
    Khayat, KH
    Bickley, JA
    Hooton, RD
    CEMENT CONCRETE AND AGGREGATES, 1995, 17 (02): : 126 - 133
  • [47] Mixing design and microstructure of ultra high strength concrete with manufactured sand
    Shen, Weiguo
    Liu, Yi
    Cao, Lianghong
    Huo, Xujia
    Yang, Zhenguo
    Zhou, Congcong
    He, Pengtao
    Lu, Zili
    CONSTRUCTION AND BUILDING MATERIALS, 2017, 143 : 312 - 321
  • [48] Limits of microfines content in manufactured sand for purposes of high strength concrete
    Li, B. X.
    Wang, J. L.
    Hu, X. M.
    Zhou, M. K.
    Proceedings of the 6th International Symposium on Cement & Concrete and CANMET/ACI International Symposium on Concrete Technology for Sustainable Development, Vols 1 and 2, 2006, : 873 - 879
  • [49] Characteristics of High-Strength High-Performance Concrete under Normal and Accelerated Curing
    Deepak, M. S.
    Prabha, Lavanya S.
    ACI MATERIALS JOURNAL, 2022, 119 (01) : 59 - 70
  • [50] Research on fracture characteristics of high-performance fine grained concrete with high-strength
    Yin, Shi-Ping
    Xu, Shi-Lang
    Dalian Ligong Daxue Xuebao/Journal of Dalian University of Technology, 2011, 51 (05): : 694 - 700