Study on performance and fractal characteristics of high-strength manufactured sand concrete with different MB values

被引:1
|
作者
Zhou, Hailong [1 ]
Ge, Chenglong [1 ]
Chen, Yan [1 ]
Song, Xingfang [2 ]
机构
[1] Inner Mongolia Agr Univ, Coll Water Resources & Civil Engn, Hohhot, Peoples R China
[2] Inner Mongolia Rd & Bridge Grp Co Ltd, Hohhot, Peoples R China
基金
中国国家自然科学基金;
关键词
MB value; manufactured sand concrete; working performance; durability; fractal characteristics; STONE DUST; SEM;
D O I
10.3389/feart.2023.1140038
中图分类号
P [天文学、地球科学];
学科分类号
07 ;
摘要
The mud powder in the manufactured sand will have an influence on the indicators of the manufactured sand concrete (MSC), and the methylene blue value can quantitatively indicate the mud powder content. To demonstrate the impact of MB values on the performance and microstructural characteristics of the manufactured sand concrete, the paper designed five high-strength MSC proportions at five MB values by controlling the clay powder content. On this basis, the workability, chloride migration coefficient, relative dynamic modulus of elasticity (P), mass loss rate (eta), and dry shrinkage rate of MSC concrete were tested under five mix ratios, and the relationship between concrete microstructure, fractal characteristics, and compressive strength (f (cc)) was analyzed by combining SEM technology and fractal theory. The experiment showed that: the higher the MB, the lower the fluidity of the MSC, and the cohesiveness gradually increases, while the water retention remains basically unchanged. In addition, the chloride migration coefficient gradually increases, the P after 300 freeze-thaw cycles first increases and then gradually decreases, while the eta and drying shrinkage first decreases and then gradually increases, and the MB value corresponding to the turning point of these three changes are all 1.10. With MB values of 0.85 and 1.10, the degree of hydration of MSC is higher and the overall structural compactness is better. The higher the MB value, the more inadequate the hydration of concrete, and the mineral components such as fly ash that have not been hydrated inside gradually increase, which leads to the gradual decrease of the overall structure compactness. In addition, when the MB value is small, the SEM image texture of concrete is relatively simple, the fractal dimension value is small, and the corresponding f (cc) is large. When the MB value is large, the texture of the SEM image is complex, the fractal dimension is large, and the corresponding f (cc) is small.
引用
收藏
页数:10
相关论文
共 50 条
  • [31] Performance of high-strength concrete corbels
    Foster, SJ
    Powell, RE
    Selim, HS
    ACI STRUCTURAL JOURNAL, 1996, 93 (05) : 555 - 563
  • [32] Properties of high-strength lightweight concrete using manufactured aggregate
    Evangelista, Ana Catarina Jorge
    Tam, Vivian W. Y.
    PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-CONSTRUCTION MATERIALS, 2020, 173 (04) : 157 - 169
  • [33] Performance of lightweight high-strength concrete prepared by different materials in buildings
    Li, Tao
    MATERIAUX & TECHNIQUES, 2024, 112 (06):
  • [34] Interface strength of High-Strength concrete to Ultra-High-Performance concrete
    Prado, Lisiane Pereira
    Carrazedo, Ricardo
    El Debs, Mounir Khalil
    ENGINEERING STRUCTURES, 2022, 252
  • [35] Experimental study on tensile strength development of concrete with manufactured sand
    Zhao, Shunbo
    Ding, Xinxin
    Zhao, Mingshuang
    Li, Changyong
    Pei, Songwei
    CONSTRUCTION AND BUILDING MATERIALS, 2017, 138 : 247 - 253
  • [36] FIELD MEASUREMENTS OF THE HIGH-STRENGTH AND HIGH PERFORMANCE CONCRETE STRENGTH
    Hu Changming
    Wang Jing
    Liu Ling
    Hou Shenjie
    PROCEEDINGS OF THE 12TH INTERNATIONAL CONFERENCE ON INSPECTION APPRAISAL REPAIRS AND MAINTENANCE OF STRUCTURES, VOLS 1 AND 2, 2010, : 447 - +
  • [37] Influence of manufactured sand's characteristics on its concrete performance
    Shen, Weiguo
    Liu, Yi
    Wang, Zhongwen
    Cao, Lianghong
    Wu, Dinglue
    Wang, Yujie
    Ji, Xiaoli
    CONSTRUCTION AND BUILDING MATERIALS, 2018, 172 : 574 - 583
  • [38] Performance of high-strength concrete tied columns - A parametric study
    Xie, J
    Elwi, AE
    MacGregor, JG
    ACI STRUCTURAL JOURNAL, 1997, 94 (02) : 91 - 102
  • [39] Research on the seismic performance of high-strength concrete columns with high-strength stirrups
    Sun, Zhi-Guo
    Si, Bing-Jun
    Wang, Dong-Sheng
    Guo, Xun
    Yu, De-Hai
    Gongcheng Lixue/Engineering Mechanics, 2010, 27 (05): : 128 - 136
  • [40] Use of High-Strength Bars for the Seismic Performance of High-Strength Concrete Columns
    Ousalem, Hassane
    Takatsu, Hiroto
    Ishikawa, Yuji
    Kimura, Hideki
    JOURNAL OF ADVANCED CONCRETE TECHNOLOGY, 2009, 7 (01) : 123 - 134