Full-scale tests on the grouting effectiveness of offshore bored piles with various bearing strata

被引:7
|
作者
Hu, Tao [1 ]
Dai, Guoliang [1 ]
Wan, Zhihui [2 ]
Fang, Bowen [1 ]
Chen, Xueying [1 ]
机构
[1] Southeast Univ, Sch Civil Engn, Nanjing 211189, Peoples R China
[2] Nanjing Tech Univ, Coll Transportat Engn, Nanjing 211816, Peoples R China
基金
中国国家自然科学基金;
关键词
Offshore bored piles; Post-grouting; Grouting effectiveness; Sea-crossing bridge; Full-scale test; Various bearing strata; DRILLED SHAFTS; FIELD;
D O I
10.1016/j.apor.2023.103791
中图分类号
P75 [海洋工程];
学科分类号
0814 ; 081505 ; 0824 ; 082401 ;
摘要
The bearing capacity of the post-grouted bored piles in sea-crossing bridges is greatly impacted by the kind of bearing stratum. Engineers are urgently concerned with the reinforcement effectiveness, improvement mecha-nism, and grout diffusion mechanism of tip-grouting of offshore bored piles in various bearing strata. Two groups of core-drilling inspections and six groups of full-scale static load tests were performed in this research. Ac-cording to the test results, post-grouting significantly improved the load-settlement response of bored piles with various bearing strata. The improvement mechanism of tip-grouting included the formation of an enlarged pile tip, the pre-mobilization effect, and the improvement of bearing strata and soil-pile interface. The reinforcement effect of post-grouting in a coarse-grained soil bearing stratum was better than that of a fine-grained soil bearing stratum. The diffusion range of upward-flowing cement mortar in the coarse-grained soil bearing stratum and fine-grained soil bearing stratum was 14-15 m and 5-7.5 m respectively, and the diffusion range was significantly affected by the type of bearing stratum. The grout exhibited spherical penetration diffusion in the coarse -grained soil bearing stratum and splitting diffusion in the fine-grained soil bearing stratum, respectively. The investigation findings provided references for amending the existing construction method of post-grouted offshore bored piles in sea-crossing bridges.
引用
收藏
页数:13
相关论文
共 50 条
  • [31] Experimental study on influence of different piling techniques on bearing characteristics of post-grouting bored piles
    Wan Z.
    Dai G.
    Gong W.
    Zhu M.
    Gao L.
    Dongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Southeast University (Natural Science Edition), 2020, 50 (02): : 231 - 236
  • [32] Full-Scale Fairing Qualification Tests
    Constantinides, Yiannis
    Liapis, Stergios
    Spencer, Don
    Islam, Mohammed
    Skaugset, Kjetil
    Batra, Apurva
    Baarholm, Rolf
    JOURNAL OF OFFSHORE MECHANICS AND ARCTIC ENGINEERING-TRANSACTIONS OF THE ASME, 2017, 139 (04):
  • [33] Thermo-mechanical behavior of driven energy piles from full-scale load tests
    Jiang, Gang
    Lin, Cheng
    Shao, Dong
    Huang, Mian
    Lu, Hongwei
    Chen, Gen
    Zong, Chenfeng
    ENERGY AND BUILDINGS, 2021, 233
  • [34] Full-scale tests of deicing with seawater
    Saeterdal, Ane
    Sundso, Per-Arne
    COLD REGIONS SCIENCE AND TECHNOLOGY, 2024, 221
  • [35] Analysis of full-scale fire tests
    Auguin, G
    Forestier, BE
    Giovannelli, G
    Casalé, E
    10TH INTERNATIONAL SYMPOSIUM ON AERODYNAMICS AND VENTILATION OF VEHICLE TUNNELS: PRINCIPLES, ANALYSIS AND DESIGN, 2000, (43): : 659 - 669
  • [36] Bearing capacity of constrained grouting expansion bored pile based on CPTU and expansion tests
    Tang, Daofei
    Wang, Changhong
    Ma, Chengtao
    Kun, Wang
    Li, Tianhu
    Yang, Shen
    MARINE GEORESOURCES & GEOTECHNOLOGY, 2024,
  • [37] Full-scale impact tests on pipelines
    Palmer, A
    Touhey, M
    Holder, S
    Anderson, M
    Booth, S
    INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2006, 32 (08) : 1267 - 1283
  • [38] Full-scale tests of a railway bridge
    Maragakis, EM
    Douglas, BM
    Chen, QB
    Sandirasegaram, U
    STRUCTURAL ANALYSIS AND DESIGN: BRIDGES, CULVERTS, AND PIPES, 1998, (1624): : 140 - 147
  • [39] Full-scale tests lead to the target
    Sulzer Tech Rev, 2 (28-31):
  • [40] DYNAMIC TESTS OF FULL-SCALE STRUCTURES
    HUDSON, DE
    JOURNAL OF THE ENGINEERING MECHANICS DIVISION-ASCE, 1977, 103 (06): : 1141 - 1157