Superplasticity of fine-grained Mg-10Li alloy prepared by severe plastic deformation and understanding its deformation mechanisms

被引:5
|
作者
Jeong, H. T. [1 ]
Lee, S. W. [1 ]
Kim, W. J. [1 ]
机构
[1] Hongik Univ, Dept Mat Sci & Engn, Sangsu Dong 72-1, Seoul 121791, South Korea
关键词
Magnesium-lithium alloy; Superplasticity; Severe plastic deformation; Grain size; Grain growth; LOW-TEMPERATURE SUPERPLASTICITY; MG-LI ALLOYS; ELEVATED-TEMPERATURE; PHASE-TRANSFORMATION; AL; BEHAVIOR; MAPS; MICROSTRUCTURE; DIFFUSION; CREEP;
D O I
10.1016/j.jma.2024.01.001
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
The superplastic behavior and associated deformation mechanisms of a fine-grained Mg -10.1 Li-0.8Al-0.6Zn alloy (LAZ1011) with a grain size of 3.2 mu m, primarily composed of the BCC )5 phase and a small amount of the HCP alpha phase, were examined in a temperature range of 473 K to 623 K. The microstructural refinement of this alloy was achieved by employing high -ratio differential speed rolling. The best superplasticity was achieved at 523 K and at strain rates of 10-4 -5 x 10-4 s-1, where tensile elongations of 550-600% were obtained. During the heating and holding stage of the tensile samples prior to tensile loading, a significant increase in grain size was observed at temperatures above 573 K. Therefore, it was important to consider this effect when analyzing and understanding the superplastic deformation behavior and mechanisms. In the investigated strain rate range, the superplastic flow at low strain rates was governed by lattice diffusion-controlled grain boundary sliding, while at high strain rates, lattice diffusion-controlled dislocation climb creep was the rate-controlling deformation mechanism. It was concluded that solute drag creep is unlikely to occur. During the late stages of deformation at 523 K, it was observed that grain boundary sliding led to the agglomeration of the alpha phase, resulting in significant strain hardening. Deformation mechanism maps were constructed for )5 -Mg -Li alloys in the form of 2D and 3D formats as a function of strain rate, stress, temperature, and grain size, using the constitutive equations for various deformation mechanisms derived based on the data of the current tests. (c) 2024 Chongqing University. Publishing services provided by Elsevier B.V. on behalf of KeAi Communications Co. Ltd. This is an open access article under the CC BY-NC-ND license ( http://creativecommons.org/licenses/by-nc-nd/4.0/ ) Peer review under responsibility of Chongqing University
引用
收藏
页码:316 / 331
页数:16
相关论文
共 50 条
  • [31] Evaluation of Hot Tensile Behavior of Fine-Grained Mg-9Al-1Zn Alloy Tube Processed by Severe Plastic Deformation
    Fata, A.
    Faraji, G.
    Mashhadi, M. M.
    Abdolvand, H.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2017, 70 (05) : 1369 - 1376
  • [32] Superplasticity in a 5024 Aluminium Alloy Processed by Severe Plastic Deformation
    Mogucheva, Anna
    Tagirova, Diana
    Kaibyshev, Rustam
    SUPERPLASTICITY IN ADVANCED MATERIALS, 2013, 735 : 353 - 358
  • [33] The Superplastic Deformation and Microstructural Analysis of Fine-grained 1420 Al-Li Alloy
    Zhang, Yanling
    Guo, Heping
    Li, Zhiqiang
    MANUFACTURING PROCESSES AND SYSTEMS, PTS 1-2, 2011, 148-149 : 434 - 438
  • [34] Superplastic Deformation Mechanisms in Fine-Grained 2050 Al-Cu-Li Alloys
    Li, Hongping
    Liu, Xiaodong
    Sun, Quan
    Ye, Lingying
    Zhang, Xinming
    MATERIALS, 2020, 13 (12) : 1 - 12
  • [35] Cumulative plastic deformation for fine-grained subgrade soils - Closure
    Li, DQ
    Selig, ET
    JOURNAL OF GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING, 1998, 124 (11) : 1154 - 1154
  • [36] Microstructural evolution in a fine-grained Al-0.3 wt.% Sc alloy produced by severe plastic deformation
    Ferry, M.
    Burhan, N.
    SCRIPTA MATERIALIA, 2007, 56 (06) : 525 - 528
  • [37] Nanostructural formation of fine grained aluminum alloy by severe plastic deformation at cryogenic temperature
    Jingou Yin
    Jian Lu
    Hongtao Ma
    Pengsheng Zhang
    Journal of Materials Science, 2004, 39 : 2851 - 2854
  • [38] Nanostructural formation of fine grained aluminum alloy by severe plastic deformation at cryogenic temperature
    Yin, JG
    Lu, J
    Ma, HT
    Zhang, PS
    JOURNAL OF MATERIALS SCIENCE, 2004, 39 (08) : 2851 - 2854
  • [39] Evaluation of Hot Tensile Behavior of Fine-Grained Mg–9Al–1Zn Alloy Tube Processed by Severe Plastic Deformation
    A. Fata
    G. Faraji
    M. M. Mashhadi
    H. Abdolvand
    Transactions of the Indian Institute of Metals, 2017, 70 : 1369 - 1376
  • [40] LUDERS BAND DEFORMATION IN A FINE-GRAINED ALUMINUM-ALLOY
    LLOYD, DJ
    MORRIS, LR
    ACTA METALLURGICA, 1977, 25 (08): : 857 - 861