On the Temperature-Induced Equilibration of Phase Distribution and Microstructure in a Gas-Atomized Titanium Aluminide Powder

被引:1
|
作者
Musi, Michael [1 ]
Clemens, Helmut [1 ]
Stark, Andreas [2 ]
Spoerk-Erdely, Petra [1 ]
机构
[1] Univ Leoben, Dept Mat Sci, Franz Josef Str 18, A-8700 Leoben, Austria
[2] Helmholtz Zentrum Hereon, Inst Mat Res, Max Planck Str 1, D-21502 Geesthacht, Germany
基金
奥地利科学基金会;
关键词
microstructure; phase transformations; powder processing; synchrotron radiation; titanium aluminides; ALPHA-PHASE; TIAL ALLOYS; GAMMA-PHASE; TRANSFORMATIONS; DIFFRACTION; EVOLUTION;
D O I
10.1002/adem.202201242
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Powder production by gas atomization of gamma-TiAl based alloys typically yields a highly nonequilibrium material regarding the occurring phases and their microstructural appearance. In particular, the equilibration of the powder and the associated phase transformations during heating are of great importance for the subsequently applied densification techniques. The present work employs in situ high-energy X-ray diffraction to investigate how this thermodynamic equilibration manifests itself in the resulting phase distribution, the ordering behavior of the disordered alpha and beta phase, both evidenced in the powder, and the change of the gamma lattice parameters during heating of a Ti-46.3Al-2.2W-0.2B (at%) powder up to 850 degrees C. Complementary microstructural characterization of the gas-atomized powder and the heat-treated material condition reveals that the temperature exposure predominately affects the dendritic parts of the microstructure, especially when the a phase is transformed into y phase with small embedded grains of alpha(2) and beta(0).
引用
下载
收藏
页数:6
相关论文
共 44 条
  • [31] TEMPERATURE-INDUCED PHASE DEVELOPMENT IN TITANIUM-IMPLANTED SILICON-CARBIDE
    VARDIMAN, RG
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1994, 177 (1-2): : 209 - 215
  • [32] Combinatorial Effects of the Recipes of the Initial Gas-atomized Powder Sizes on Microstructure and Passivation Characteristics of the SLM-ed Ti-6Al-4V Bulk Alloys
    Zhang, Yu
    Lei, Jiazhuo
    Dan, Zhenhua
    Chang, Hui
    Zhou, Lian
    MATERIALS SCIENCE-MEDZIAGOTYRA, 2023, 29 (02): : 176 - 185
  • [33] Influence of temperature on the magnetic properties of nanostructured Fe-49 wt.% Co-2 wt.% V alloy powder synthesized by mechanically milling pre-alloyed gas-atomized powder
    Bazzi, Kathem
    Meka, Vamsi M.
    Rathi, Anuj
    Jayaraman, Tanjore V.
    MATERIALS CHEMISTRY AND PHYSICS, 2019, 227 : 36 - 45
  • [34] Brittle-to-ductile transition temperature and its strain rate sensitivity in a two-phase titanium aluminide with near lamellar microstructure
    Yu Wang
    Dongliang Lin
    Chi C. Law
    Journal of Materials Science, 1999, 34 : 3155 - 3159
  • [35] Brittle-to-ductile transition temperature and its strain rate sensitivity in a two-phase titanium aluminide with near lamellar microstructure
    Department of Materials Science, Shanghai Jiaotong University, Open Lab. Educ. Min. High-Temp. M., Shanghai, 200030, China
    不详
    J Mater Sci, 13 (3155-3159):
  • [36] Brittle-to-ductile transition temperature and its strain rate sensitivity in a two-phase titanium aluminide with near lamellar microstructure
    Wang, Y
    Lin, DL
    Law, CC
    JOURNAL OF MATERIALS SCIENCE, 1999, 34 (13) : 3155 - 3159
  • [37] Effects of temperature-induced variation of the second phase on the microstructure, texture and properties of Mg-RE-Zn alloys
    Lu, Dongliang
    Wu, Guoqin
    Yu, Jianmin
    Liu, Yunfang
    Zhang, Zhimin
    Huang, Huagui
    Li, Linlin
    Feng, Yan
    Xu, Hengqiu
    MATERIALS RESEARCH EXPRESS, 2024, 11 (03)
  • [38] Microstructure investigations and thermoelectrical properties of a P-type polycrystalline higher manganese silicide material sintered from a gas-phase atomized powder
    Bernard-Granger, Guillaume
    Soulier, Mathieu
    Ihou-Mouko, Hilaire
    Navone, Christelle
    Boidot, Mathieu
    Leforestier, Jean
    Simon, Julia
    JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 618 : 403 - 412
  • [39] Microstructure investigations and thermoelectrical properties of an N-type magnesium-silicon-tin alloy sintered from a gas-phase atomized powder
    Bernard-Granger, Guillaume
    Navone, Christelle
    Leforestier, Jean
    Boidot, Mathieu
    Romanjek, Krunoslav
    Carrete, Jesus
    Simon, Julia
    ACTA MATERIALIA, 2015, 96 : 437 - 451
  • [40] Microstructure, densification, and mechanical properties of titanium intermetallic alloy manufactured by laser powder bed fusion additive manufacturing with high-temperature preheating using gas atomized and mechanically alloyed plasma spheroidized powders
    Polozov, Igor
    Sufiiarov, Vadim
    Kantyukov, Artem
    Razumov, Nikolay
    Goncharov, Ivan
    Makhmutov, Tagir
    Silin, Alexey
    Kim, Artem
    Starikov, Kirill
    Shamshurin, Alexey
    Popovich, Anatoly
    ADDITIVE MANUFACTURING, 2020, 34