On the Temperature-Induced Equilibration of Phase Distribution and Microstructure in a Gas-Atomized Titanium Aluminide Powder

被引:1
|
作者
Musi, Michael [1 ]
Clemens, Helmut [1 ]
Stark, Andreas [2 ]
Spoerk-Erdely, Petra [1 ]
机构
[1] Univ Leoben, Dept Mat Sci, Franz Josef Str 18, A-8700 Leoben, Austria
[2] Helmholtz Zentrum Hereon, Inst Mat Res, Max Planck Str 1, D-21502 Geesthacht, Germany
基金
奥地利科学基金会;
关键词
microstructure; phase transformations; powder processing; synchrotron radiation; titanium aluminides; ALPHA-PHASE; TIAL ALLOYS; GAMMA-PHASE; TRANSFORMATIONS; DIFFRACTION; EVOLUTION;
D O I
10.1002/adem.202201242
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Powder production by gas atomization of gamma-TiAl based alloys typically yields a highly nonequilibrium material regarding the occurring phases and their microstructural appearance. In particular, the equilibration of the powder and the associated phase transformations during heating are of great importance for the subsequently applied densification techniques. The present work employs in situ high-energy X-ray diffraction to investigate how this thermodynamic equilibration manifests itself in the resulting phase distribution, the ordering behavior of the disordered alpha and beta phase, both evidenced in the powder, and the change of the gamma lattice parameters during heating of a Ti-46.3Al-2.2W-0.2B (at%) powder up to 850 degrees C. Complementary microstructural characterization of the gas-atomized powder and the heat-treated material condition reveals that the temperature exposure predominately affects the dendritic parts of the microstructure, especially when the a phase is transformed into y phase with small embedded grains of alpha(2) and beta(0).
引用
收藏
页数:6
相关论文
共 44 条
  • [21] Fabrication of bulk τ MnAl-C magnets by hot-pressing from ε-phase gas-atomized and milled powder
    Munoz-Rodriguez, C.
    Feng, L.
    Palmero, E. M.
    Mix, T.
    Rial, J.
    Olsson, F.
    Skarman, B.
    Vidarsson, H.
    Larsson, P-O
    Woodcock, T. G.
    Bollero, A.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 847
  • [22] Thermoelectric Properties of Nearly Single-Phase β-FeSi2 Alloys Fabricated by Gas-Atomized Powder Sintering
    Kimura, Yoshisato
    Yamada, Masashi
    Chai, Yaw Wang
    MATERIALS TRANSACTIONS, 2019, 60 (05) : 652 - 661
  • [23] Size- and temperature-induced phase transformations of titanium nanoparticles
    Xiong, Shiyun
    Qi, Weihong
    Huang, Baiyun
    Wang, Mingpu
    Li, Yejun
    Li, Zhou
    Liang, Shuquan
    EPL, 2011, 93 (06)
  • [24] Optimization of electromagnetic properties for soft magnetic powder cores prepared by gas-atomized FeSiBCuNb powders with continuously distributed the phase structures
    Shi, Guibing
    Wang, Mingxu
    Miao, Hongyi
    Li, Guanzhi
    Li, Bolin
    Zang, Jinao
    Yin, Gongchang
    Wang, Li
    Li, Zongzhen
    MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 2023, 298
  • [26] From Pre-Alloyed Rod to Gas-Atomized Powder and SPS Sintered Samples: How the Microstructure of an Nb Silicide Based Alloy Evolves
    Drawin, Stefan
    Malard, Virgil
    Denquin, Anne
    Monchoux, Jean-Philippe
    Couret, Alain
    THERMEC 2018: 10TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS, 2018, 941 : 1264 - 1269
  • [27] Microstructure and mechanical properties of AlCoCrFeNi2.1 eutectic high-entropy alloy synthesized by spark plasma sintering of gas-atomized powder
    Pan, Wenjie
    Fu, Peixin
    Li, Zhanjiang
    Chen, Hongxiang
    Tang, Qunhua
    Dai, Pinqiang
    Liu, Chao
    Lin, Le
    INTERMETALLICS, 2022, 144
  • [28] Phase transformation and strengthening of the gas-atomized FeCoCr NiMo 0.5 Al 1.3 high-entropy alloy powder during annealing
    Larionova, Tatiana
    Semikolenov, Anton
    Kuznetsov, Pavel
    Shalnova, Svetlana
    Tolochko, Oleg
    HELIYON, 2024, 10 (08)
  • [29] Effect of high-energy ball milling on the microstructure and mechanical properties of Ni-based ODS alloys fabricated using gas-atomized powder
    Park, Chun Woong
    Choi, Won June
    Byun, Jongmin
    Kim, Young Do
    JOURNAL OF MATERIALS SCIENCE, 2022, 57 (38) : 18195 - 18204
  • [30] Effect of high-energy ball milling on the microstructure and mechanical properties of Ni-based ODS alloys fabricated using gas-atomized powder
    Chun Woong Park
    Won June Choi
    Jongmin Byun
    Young Do Kim
    Journal of Materials Science, 2022, 57 : 18195 - 18204