On Perpendicular Curve-Based Task Space Trajectory Tracking Control With Incomplete Orientation Constraint

被引:1
|
作者
Li, Gaofeng [1 ]
Xu, Shan [2 ,3 ]
Song, Dezhen [4 ]
Caponetto, Fernando [1 ]
Sarakoglou, Ioannis [1 ]
Liu, Jingtai [2 ,3 ]
Tsagarakis, Nikos G. [1 ]
机构
[1] Ist Italian Tecnol IIT, Humanoids & Human Ctr Mechatron Res Line, I-16163 Genoa, Italy
[2] Nankai Univ, Inst Robot & Automat Informat Syst, Tianjin 300350, Peoples R China
[3] Nankai Univ, Tianjin Key Lab Intelligent Robot, Tianjin 300350, Peoples R China
[4] Texas A&M Univ, Dept Comp Sci & Engn, College Stn, TX 77843 USA
关键词
Redundancy; Robots; Task analysis; Trajectory tracking; Trajectory; Jacobian matrices; Robot kinematics; Perpendicular curve in SO(3); incomplete orientation constraint (IOC); functional; intrinsic redundancy; trajectory tracking control; JOINT-LIMITS; REDUNDANT MANIPULATORS; SERIAL MANIPULATORS; INVERSE KINEMATICS; POINTING TASKS; ROBOTIC CELL; OPTIMIZATION; CALIBRATION; MODEL;
D O I
10.1109/TASE.2022.3183079
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
The Incomplete Orientation Constraint (IOC), which does not require a controlled motion constrained by all three spatial directions, exists widely in a lot of robotic tasks. However, the IOC remains a challenge for existing methods, due to the nonlinear structure of the rotation group SO(3). Moreover, the IOCs are time varying in the trajectory tracking problem, which makes it more challenging than the set-point control. To address the IOC problems, we define, identify and prove the closed-form solution of the perpendicular curve in SO(3). Based on the proposed perpendicular curve, we develop a new trajectory tracking controller considering the IOC. Compared with existing methods, the proposed method can achieve faster and more accurate tracking results. Moreover, the proposed method can be applied not only to manipulators with redundancy (including both functional and intrinsic redundancy), but also to manipulators that are non-redundant. Furthermore, it is easier to incorporate a secondary optimization objective into consideration for the intrinsic redundant case, which is difficult for existing methods. The proposed method has been implemented on both simulations and experiments. The numerous simulation and experimental results validate the effectiveness and advantages of the proposed method. Note to Practitioners-The trajectory tracking control with IOC is important and can be applied in a wide spectrum of robotic-assisted manufacturing, e.g. arc-welding, engraving, etc.. In this paper, a perpendicular curve-based trajectory tracking method is proposed to consider the IOC automatically. It is no longer necessary to carefully plan a reachable orientation trajectory. Users only need to focus the planning of the tool direction, which is determined by the tasks. In addition, the proposed method can achieve faster and more accurate tracking result. Moreover, it is universal and can be applied to both redundant and non-redundant cases.
引用
收藏
页码:1244 / 1261
页数:18
相关论文
共 50 条
  • [1] On Perpendicular Curve-Based Model-Less Control Considering Incomplete Orientation Constraint
    Li, Gaofeng
    Song, Dezhen
    Xu, Shan
    Sun, Lei
    Liu, Jingtai
    [J]. IEEE-ASME TRANSACTIONS ON MECHATRONICS, 2021, 26 (03) : 1479 - 1489
  • [2] Trajectory planning and tracking control for perpendicular parking based on clothoid curve
    Zhang J.
    Zhao J.
    Shi Z.
    Yang X.
    [J]. Dongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Southeast University (Natural Science Edition), 2020, 50 (01): : 182 - 191
  • [3] The Theory of Perpendicular Curve in Rotation Group Aiming at Incomplete Orientation Constraint Problems
    Li G.
    Xu S.
    Sun L.
    Liu J.
    [J]. Liu, Jingtai (liujt@nankai.edu.cn), 2018, Chinese Academy of Sciences (40): : 195 - 205
  • [4] Bezier curve-based smoothing for path planner with curvature constraint
    Cimurs, Reinis
    Hwang, Jaepyung
    Suh, Il Hong
    [J]. 2017 FIRST IEEE INTERNATIONAL CONFERENCE ON ROBOTIC COMPUTING (IRC), 2017, : 241 - 248
  • [5] Exploring the Design Space of Curve-Based Cryptographic Accelerators
    Alimi, Nejmeddine
    Sghaier, Anissa
    Machhout, Mohsen
    Tourki, Rached
    [J]. 2017 INTERNATIONAL CONFERENCE ON ENGINEERING & MIS (ICEMIS), 2017,
  • [6] Exponential stability of trajectory tracking control in the orientation space utilizing unit quaternions
    Koutras, Leonidas
    Doulgeri, Zoe
    [J]. 2021 IEEE/RSJ INTERNATIONAL CONFERENCE ON INTELLIGENT ROBOTS AND SYSTEMS (IROS), 2021, : 8151 - 8158
  • [7] Electric sail trajectory design with Bezier curve-based shaping approach
    Huo, Mingying
    Mengali, Giovanni
    Quarta, Alessandro A.
    Qi, Naiming
    [J]. AEROSPACE SCIENCE AND TECHNOLOGY, 2019, 88 : 126 - 135
  • [8] Finite-time trajectory tracking control in a task space of robotic manipulators
    Galicki, Miroslaw
    [J]. AUTOMATICA, 2016, 67 : 165 - 170
  • [9] Task Space Trajectory Tracking Control of Robot Manipulators with Uncertain Kinematics and Dynamics
    Liang, Xichang
    Wan, Yi
    Zhang, Chengrui
    [J]. MATHEMATICAL PROBLEMS IN ENGINEERING, 2017, 2017
  • [10] Trajectory Tracking Control for Uncertain Robot Manipulators with Repetitive Motions in Task Space
    Liu, Jiutai
    Dong, Xiucheng
    Yang, Yong
    Chen, Hongyu
    [J]. MATHEMATICAL PROBLEMS IN ENGINEERING, 2021, 2021 (2021)