On Perpendicular Curve-Based Task Space Trajectory Tracking Control With Incomplete Orientation Constraint

被引:1
|
作者
Li, Gaofeng [1 ]
Xu, Shan [2 ,3 ]
Song, Dezhen [4 ]
Caponetto, Fernando [1 ]
Sarakoglou, Ioannis [1 ]
Liu, Jingtai [2 ,3 ]
Tsagarakis, Nikos G. [1 ]
机构
[1] Ist Italian Tecnol IIT, Humanoids & Human Ctr Mechatron Res Line, I-16163 Genoa, Italy
[2] Nankai Univ, Inst Robot & Automat Informat Syst, Tianjin 300350, Peoples R China
[3] Nankai Univ, Tianjin Key Lab Intelligent Robot, Tianjin 300350, Peoples R China
[4] Texas A&M Univ, Dept Comp Sci & Engn, College Stn, TX 77843 USA
关键词
Redundancy; Robots; Task analysis; Trajectory tracking; Trajectory; Jacobian matrices; Robot kinematics; Perpendicular curve in SO(3); incomplete orientation constraint (IOC); functional; intrinsic redundancy; trajectory tracking control; JOINT-LIMITS; REDUNDANT MANIPULATORS; SERIAL MANIPULATORS; INVERSE KINEMATICS; POINTING TASKS; ROBOTIC CELL; OPTIMIZATION; CALIBRATION; MODEL;
D O I
10.1109/TASE.2022.3183079
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
The Incomplete Orientation Constraint (IOC), which does not require a controlled motion constrained by all three spatial directions, exists widely in a lot of robotic tasks. However, the IOC remains a challenge for existing methods, due to the nonlinear structure of the rotation group SO(3). Moreover, the IOCs are time varying in the trajectory tracking problem, which makes it more challenging than the set-point control. To address the IOC problems, we define, identify and prove the closed-form solution of the perpendicular curve in SO(3). Based on the proposed perpendicular curve, we develop a new trajectory tracking controller considering the IOC. Compared with existing methods, the proposed method can achieve faster and more accurate tracking results. Moreover, the proposed method can be applied not only to manipulators with redundancy (including both functional and intrinsic redundancy), but also to manipulators that are non-redundant. Furthermore, it is easier to incorporate a secondary optimization objective into consideration for the intrinsic redundant case, which is difficult for existing methods. The proposed method has been implemented on both simulations and experiments. The numerous simulation and experimental results validate the effectiveness and advantages of the proposed method. Note to Practitioners-The trajectory tracking control with IOC is important and can be applied in a wide spectrum of robotic-assisted manufacturing, e.g. arc-welding, engraving, etc.. In this paper, a perpendicular curve-based trajectory tracking method is proposed to consider the IOC automatically. It is no longer necessary to carefully plan a reachable orientation trajectory. Users only need to focus the planning of the tool direction, which is determined by the tasks. In addition, the proposed method can achieve faster and more accurate tracking result. Moreover, it is universal and can be applied to both redundant and non-redundant cases.
引用
收藏
页码:1244 / 1261
页数:18
相关论文
共 50 条
  • [31] Trajectory Tracking Control for an Tethered Space Net Robot
    Zhang, Fan
    Huang, Panfeng
    [J]. 2018 IEEE 8TH ANNUAL INTERNATIONAL CONFERENCE ON CYBER TECHNOLOGY IN AUTOMATION, CONTROL, AND INTELLIGENT SYSTEMS (IEEE-CYBER), 2018, : 243 - 248
  • [32] Trajectory tracking control of electric sail with input uncertainty and saturation constraint
    Wang, Yu
    Bian, Bingxiu
    [J]. TRANSACTIONS OF THE INSTITUTE OF MEASUREMENT AND CONTROL, 2017, 39 (07) : 1007 - 1016
  • [33] Interpolating Control Based Trajectory Tracking
    Boucek, Zdenek
    Flidr, Miroslav
    [J]. 16TH IEEE INTERNATIONAL CONFERENCE ON CONTROL, AUTOMATION, ROBOTICS AND VISION (ICARCV 2020), 2020, : 701 - 706
  • [34] Adaptive Trajectory Tracking Control of Wheeled Mobile Robots with Nonholonomic Constraint
    李建华
    王孙安
    [J]. Journal of Electronic Science and Technology, 2005, (04) : 342 - 347
  • [35] Bezier curve-based motion planning and control algorithm for biomimetic robot fish
    Shen, Zhizhong
    Wang, Shuo
    Cao, Zhiqiang
    Tan, Min
    Hou, Zengguang
    [J]. DYNAMICS OF CONTINUOUS DISCRETE AND IMPULSIVE SYSTEMS-SERIES B-APPLICATIONS & ALGORITHMS, 2006, 13E : 3826 - 3830
  • [36] Observer-based fixed-time tracking control for space robots in task space
    Jin, Rongyu
    Rocco, Paolo
    Geng, Yunhai
    [J]. ACTA ASTRONAUTICA, 2021, 184 : 35 - 45
  • [37] Observer-based attitude tracking control for near space vehicle with output constraint
    Wang, Cui
    Zhang, Qiang
    Xu, Hui
    [J]. PROCEEDINGS OF THE 30TH CHINESE CONTROL AND DECISION CONFERENCE (2018 CCDC), 2018, : 182 - 186
  • [38] A Model Predictive Control (MPC) Approach on Unit Quaternion Orientation Based Quadrotor for Trajectory Tracking
    Maidul Islam
    Mohamed Okasha
    Erwin Sulaeman
    [J]. International Journal of Control, Automation and Systems, 2019, 17 : 2819 - 2832
  • [39] A Model Predictive Control (MPC) Approach on Unit Quaternion Orientation Based Quadrotor for Trajectory Tracking
    Islam, Maidul
    Okasha, Mohamed
    Sulaeman, Erwin
    [J]. INTERNATIONAL JOURNAL OF CONTROL AUTOMATION AND SYSTEMS, 2019, 17 (11) : 2819 - 2832
  • [40] Fast Cooperative Trajectory Generation of Unmanned Aerial Vehicles Using a Bezier Curve-Based Shaping Method
    Yu, Ze
    Qi, Naiming
    Huo, Mingying
    Fan, Zichen
    Yao, Weiran
    [J]. IEEE ACCESS, 2022, 10 : 1626 - 1636