The Stress Distribution and Thermal Behavior of TiBN and TiBN TiN Coatings in Milling AISI H13 Work Tool Steel

被引：2
|
作者：
SHIVPURI Raja
闫洪
机构：
[1] Nanchang 330029
[2] Nanchang University
[3] China
[4] Institute of Mechanical-Electrical Engineering
[5] The Ohio State University(Columbus)
来源：
Journal of Wuhan University of Technology(Materials Science) | 2005年 / 01期
基金：
中国国家自然科学基金;
关键词：
TiBN and TiBN/TiN coating; AISI H13 work tool stee l; milling; simulation;
D O I：
暂无
中图分类号：
TG174 [腐蚀的控制与防护];
学科分类号：
080503 ;
摘要：
The FEM model of TiBN and TiBN/TiN coated cutting tool in milling of H13 steel w as developed. Process variables such as temperature and stress in the coating l ayer as well as in the substrate were analyzed. The efficacy of the present FEM analysis was verified by conducting controlled milling experiments on AISI H13 t o collect the relevant tool life and force data.The results show that the stress in a coated tool can significantly be reduced compared to an uncoated cutting t ool,possibly due to surface coatings improving the tribological properties of cu tting tools.Coatings with good thermal properties also help to improve the therm al behavior of cutting tool.
引用
收藏
页码：1 / 5
页数：5
相关论文
共 50 条
  • [1] The stress distribution and thermal Behavior of TiBN and TiBN/TiN coatings in milling AISI h13 work tool steel
    Yan, H
    Hua, J
    Shivpuri, R
    [J]. JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2005, 20 (01): : 1 - 5
  • [2] The stress distribution and thermal behavior of TiBN and TiBN/TiN coatings in milling AISI H13 work tool steel
    Yan Hong
    Hua Jiang
    Shivpuri Raja
    [J]. Journal of Wuhan University of Technology-Mater. Sci. Ed., 2005, 20 (1): : 1 - 5
  • [3] Wear and residual stress in high-feed milling of AISI H13 tool steel
    Bakirci, Altug
    Koca, Selim
    Erdogan, Ozlem
    Cakir, Mustafa Cemal
    [J]. MATERIALS TESTING, 2023, 65 (12) : 1845 - 1856
  • [4] The effect of nitrogen flow rate on TiBN coatings deposited on cold work tool steel
    Cicek, Hikmet
    Baran, Ozlem
    Demirci, Ebru Emine
    Tahmasebian, Mortaza
    Totik, Yasar
    Efeoglu, Ihsan
    [J]. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2014, 28 (12) : 1140 - 1148
  • [5] FLOW STRESS MODEL FOR HARD MACHINING OF AISI H13 WORK TOOL STEEL
    R. Shivpuri
    [J]. Acta Metallurgica Sinica(English Letters), 2005, (06) : 741 - 748
  • [6] Prediction of residual stress in precision milling of AISI H13 steel
    Reimer, Andreas
    Luo, Xichun
    [J]. 4TH CIRP CONFERENCE ON SURFACE INTEGRITY (CSI 2018), 2018, 71 : 329 - 334
  • [7] Mechanical behavior of TiN/TiC multilayer coatings fabricated by plasma assisted chemical vapor deposition on AISI H13 hot work tool steel
    Azadi, M.
    Rouhaghdam, A. Sabour
    Ahangarani, S.
    Mofidi, H. H.
    [J]. SURFACE & COATINGS TECHNOLOGY, 2014, 245 : 156 - 166
  • [8] Characterization of the resistance to thermal softening of a modified AISI H13 hot - work tool steel
    Gobber, F. S.
    Ugues, D.
    Martelli, P.
    Rosso, M.
    [J]. METALLURGIA ITALIANA, 2018, (09): : 23 - 29
  • [9] Thermal Fatigue Behavior of AISI H13 Hot Work Tool Steel Produced by Direct Laser Metal Deposition
    Pellizzari, Massimo
    Massignani, Daniel
    Amirabdollahian, Sasan
    Deirmina, Faraz
    [J]. STEEL RESEARCH INTERNATIONAL, 2023, 94 (04)
  • [10] Corrosion behavior of borided AISI H13 hot work steel
    Kariofillis, George K.
    Kiourtsidis, Grigoris E.
    Tsipas, Dimitrios N.
    [J]. SURFACE & COATINGS TECHNOLOGY, 2006, 201 (1-2): : 19 - 24
12345