The stress distribution and thermal behavior of TiBN and TiBN/TiN coatings in milling AISI H13 work tool steel

被引：0
|
作者：
Yan Hong
Hua Jiang
Shivpuri Raja
机构：
[1] Nanchang University,Institute of Mechanical
[2] The Ohio State University (Columbus),Electrical Engineering
来源：
Journal of Wuhan University of Technology-Mater. Sci. Ed. | 2005年 / 20卷 / 1期
关键词：
TiBN and TiBN/TiN coating; AISI H13 work tool steel; milling; simulation;
D O I：
10.1007/BF02870860
中图分类号：
学科分类号：
摘要：
The FEM model of TiBN and TiBN/TiN coated cutting tool in milling of H13 steel was developed. Process variables such as temperature and stress in the coating layer as well as in the substrate were analyzed. The efficacy of the present FEM analysis was verified by conducting controlled milling experiments on AISI H13 to collect the relevant tool life and force data. The results show that the stress in a coated tool can significantly be reduced compared to uncoated cutting tool, possibly due to surface coatings improving the tribological properties of cutting tools. Coating with good thermal properties also help to improve the thermal behavior of cutting tool.
引用
收藏
页码：1 / 5
页数：4
相关论文
共 50 条
  • [1] The stress distribution and thermal Behavior of TiBN and TiBN/TiN coatings in milling AISI h13 work tool steel
    Yan, H
    Hua, J
    Shivpuri, R
    [J]. JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2005, 20 (01): : 1 - 5
  • [2] The Stress Distribution and Thermal Behavior of TiBN and TiBN TiN Coatings in Milling AISI H13 Work Tool Steel
    SHIVPURI Raja
    闫洪
    [J]. Journal of Wuhan University of Technology(Materials Science), 2005, (01) : 1 - 5
  • [3] Wear and residual stress in high-feed milling of AISI H13 tool steel
    Bakirci, Altug
    Koca, Selim
    Erdogan, Ozlem
    Cakir, Mustafa Cemal
    [J]. MATERIALS TESTING, 2023, 65 (12) : 1845 - 1856
  • [4] The effect of nitrogen flow rate on TiBN coatings deposited on cold work tool steel
    Cicek, Hikmet
    Baran, Ozlem
    Demirci, Ebru Emine
    Tahmasebian, Mortaza
    Totik, Yasar
    Efeoglu, Ihsan
    [J]. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2014, 28 (12) : 1140 - 1148
  • [5] FLOW STRESS MODEL FOR HARD MACHINING OF AISI H13 WORK TOOL STEEL
    R. Shivpuri
    [J]. Acta Metallurgica Sinica(English Letters), 2005, (06) : 741 - 748
  • [6] Prediction of residual stress in precision milling of AISI H13 steel
    Reimer, Andreas
    Luo, Xichun
    [J]. 4TH CIRP CONFERENCE ON SURFACE INTEGRITY (CSI 2018), 2018, 71 : 329 - 334
  • [7] Mechanical behavior of TiN/TiC multilayer coatings fabricated by plasma assisted chemical vapor deposition on AISI H13 hot work tool steel
    Azadi, M.
    Rouhaghdam, A. Sabour
    Ahangarani, S.
    Mofidi, H. H.
    [J]. SURFACE & COATINGS TECHNOLOGY, 2014, 245 : 156 - 166
  • [8] Characterization of the resistance to thermal softening of a modified AISI H13 hot - work tool steel
    Gobber, F. S.
    Ugues, D.
    Martelli, P.
    Rosso, M.
    [J]. METALLURGIA ITALIANA, 2018, (09): : 23 - 29
  • [9] Thermal Fatigue Behavior of AISI H13 Hot Work Tool Steel Produced by Direct Laser Metal Deposition
    Pellizzari, Massimo
    Massignani, Daniel
    Amirabdollahian, Sasan
    Deirmina, Faraz
    [J]. STEEL RESEARCH INTERNATIONAL, 2023, 94 (04)
  • [10] Corrosion behavior of borided AISI H13 hot work steel
    Kariofillis, George K.
    Kiourtsidis, Grigoris E.
    Tsipas, Dimitrios N.
    [J]. SURFACE & COATINGS TECHNOLOGY, 2006, 201 (1-2): : 19 - 24
12345