The Stress Distribution and Thermal Behavior of TiBN and TiBN TiN Coatings in Milling AISI H13 Work Tool Steel

被引：2
|
作者：
SHIVPURI Raja
闫洪
机构：
[1] Nanchang 330029
[2] Nanchang University
[3] China
[4] Institute of Mechanical-Electrical Engineering
[5] The Ohio State University(Columbus)
来源：
Journal of Wuhan University of Technology(Materials Science) | 2005年 / 01期
基金：
中国国家自然科学基金;
关键词：
TiBN and TiBN/TiN coating; AISI H13 work tool stee l; milling; simulation;
D O I：
暂无
中图分类号：
TG174 [腐蚀的控制与防护];
学科分类号：
080503 ;
摘要：
The FEM model of TiBN and TiBN/TiN coated cutting tool in milling of H13 steel w as developed. Process variables such as temperature and stress in the coating l ayer as well as in the substrate were analyzed. The efficacy of the present FEM analysis was verified by conducting controlled milling experiments on AISI H13 t o collect the relevant tool life and force data.The results show that the stress in a coated tool can significantly be reduced compared to an uncoated cutting t ool,possibly due to surface coatings improving the tribological properties of cu tting tools.Coatings with good thermal properties also help to improve the therm al behavior of cutting tool.
引用
收藏
页码：1 / 5
页数：5
相关论文
共 50 条
  • [21] Laser surface hardening of AISI H13 tool steel
    Lee, Jae-Ho
    Jang, Jeong-Hwan
    Joo, Byeong-Don
    Son, Young-Myung
    Moon, Young-Hoon
    [J]. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2009, 19 (04) : 917 - 920
  • [22] SURFACE ROUGHNESS AND WEAR BEHAVIOR OF LASER MACHINED AISI H13 TOOL STEEL
    Kasman, S.
    Saklakoglu, I. E.
    [J]. ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES II, PTS 1 AND 2, 2011, 264-265 : 1264 - +
  • [23] Influence of heat treatments on microstructure and wear behavior of AISI H13 tool steel
    Ozer, Melika
    [J]. KOVOVE MATERIALY-METALLIC MATERIALS, 2022, 60 (06): : 387 - 396
  • [24] AISI H13 Hot-Work Steel with Hard Chromium Plating Thermal Fatigue Behavior Evaluation
    Yeh, Shu-Hung
    Chiu, Liu-Ho
    Lin, Shou-Chi
    Pan, Yeong-Tsuen
    [J]. MATERIALS ENGINEERING AND TECHNOLOGY, 2014, 849 : 8 - +
  • [25] Tool wear in dry helical milling for hole-making in AISI H13 hardened steel
    Dutra Pereira, Robson Bruno
    Lauro, Carlos Henrique
    Brandao, Lincoln Cardoso
    Ferreira, Joao Roberto
    Paulo Davim, J.
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 101 (9-12): : 2425 - 2439
  • [26] Surface roughness evaluation of high-speed milling of hot work tool steel H13 for different PVD tool coatings
    Mativenga, PT
    Hon, KKB
    [J]. ADVANCES IN MANUFACTURING TECHNOLOGY - XIV, 2000, : 339 - 343
  • [27] Tool wear in dry helical milling for hole-making in AISI H13 hardened steel
    Robson Bruno Dutra Pereira
    Carlos Henrique Lauro
    Lincoln Cardoso Brandão
    João Roberto Ferreira
    J. Paulo Davim
    [J]. The International Journal of Advanced Manufacturing Technology, 2019, 101 : 2425 - 2439
  • [28] Assessment of the surface integrity of AISI H13 tool steel after milling with carbide and cermet inserts
    Silveira, Michele Lisboa
    de Oliveira, Diogo Azevedo
    dos Santos, Anderson Junior
    de Faria, Paulo Eustaquio
    Abrao, Alexandre Mendes
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 125 (7-8): : 3135 - 3148
  • [29] Assessment of the surface integrity of AISI H13 tool steel after milling with carbide and cermet inserts
    Michele Lisboa Silveira
    Diogo Azevedo de Oliveira
    Anderson Júnior dos Santos
    Paulo Eustáquio de Faria
    Alexandre Mendes Abrão
    [J]. The International Journal of Advanced Manufacturing Technology, 2023, 125 : 3135 - 3148
  • [30] Experimental evaluation and modelling of the boronizing kinetics of AISI H13 hot work tool steel
    Abdellah, Zahra Nait
    Boumaali, Brahim
    Keddam, Mourad
    [J]. MATERIALS TESTING, 2021, 63 (12) : 1136 - 1141
12345