Microstructural evolution and growth kinetics of thermally grown oxides in plasma sprayed thermal barrier coatings

被引:1
|
作者
Xiaoju Liu [1 ]
Teng Wang [1 ]
Caicai Li [1 ]
Zhenhuan Zheng [1 ]
Qiang Li [1 ]
机构
[1] School of Materials Science and Engineering, Fuzhou University
基金
中国国家自然科学基金;
关键词
Thermal barrier coatings(TBCs); Air plasma spraying(APS); CoNiCrAlY; YSZ ceramic coat; Isothermal oxidation; Oxidation rate;
D O I
暂无
中图分类号
TQ174.758.16 [];
学科分类号
080503 ;
摘要
The formation of thermally grown oxide(TGO) during high temperature is a key factor to the degradation of thermal barrier coatings(TBCs)applied on hot section components. In the present study both the Co Ni Cr Al Y bond coat and Zr O-8 wt.% YO(8YSZ) ceramic coat of TBCs were prepared by air plasma spraying(APS). The composition and microstructure of TGO in TBCs were investigated using scanning electron microscopy(SEM), energy dispersive spectroscopy(EDS) and X-ray diffraction(XRD) analysis. The growth rate of TGO for TBC and pure BC were gained after isothermal oxidation at 1100 °C for various times. The results showed that as-sprayed bond coat consisted of β and γ/γ’phases,β phase reducesd as the oxidation time increased. The TGO comprised α-AlOformed in the first 2 h. Co O, Ni O, CrOand spinel oxides appeared after 20 h of oxidation. Contents of Co O and Ni O reduced while that of CrOand spinel oxides increased in the later oxidation stage.The TGO eventually consisted of a sub-Al2O3 layer with columnar microstructure and the upper porous CS clusters. The TGO growth kinetics for two kinds of samples followed parabolic laws, with oxidation rate constant of 0.344 μm/hfor TBCs and 0.354 μm/h0.5for pure BCs.
引用
收藏
页码:103 / 111
页数:9
相关论文
共 50 条
  • [21] Microstructural and Thermal properties of Plasma Sprayed YSZ Nano-Clusters Thermal Barrier Coatings
    Tailor, Satish
    Singh, Manoj
    Mohanty, R. M.
    Doub, A. V.
    JOURNAL OF CLUSTER SCIENCE, 2016, 27 (05) : 1501 - 1518
  • [22] The Protectiveness of Thermally Grown Oxides on Cold Sprayed CoNiCrAlY Bond Coat in Thermal Barrier Coating
    A. Manap
    A. Nakano
    K. Ogawa
    Journal of Thermal Spray Technology, 2012, 21 : 586 - 596
  • [23] The Protectiveness of Thermally Grown Oxides on Cold Sprayed CoNiCrAlY Bond Coat in Thermal Barrier Coating
    Manap, A.
    Nakano, A.
    Ogawa, K.
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2012, 21 (3-4) : 586 - 596
  • [24] Kinetics of thermally grown oxide at interface between thermal barrier coatings and MCrAlY bond coatings
    Ogawa, K
    Masuda, T
    Shoji, T
    THERMAL SPRAY 2001: NEW SURFACES FOR A NEW MILLENNIUM, 2001, : 187 - 194
  • [25] Porosity and microstructural features of plasma sprayed Yttria stabilized Zirconia thermal barrier coatings
    Sobhanverdi, Ramazan
    Akbari, Alireza
    CERAMICS INTERNATIONAL, 2015, 41 (10) : 14517 - 14528
  • [26] Deformation of plasma sprayed thermal barrier coatings
    Senturk, U
    Lima, RS
    Lima, CRC
    Berndt, CC
    JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 2000, 122 (03): : 387 - 392
  • [27] Stiffness of Plasma Sprayed Thermal Barrier Coatings
    Paul, Shiladitya
    COATINGS, 2017, 7 (05):
  • [28] Deposition of the plasma sprayed thermal barrier coatings
    Ilyschenko, A
    Okovity, V
    Sobolevskij, S
    Dubelir, T
    PUBLICATIONS OF THE ASTRONOMICAL OBSERVATORY OF BELGRADE, NO 53: PROCEEDINGS OF THE FIRST BELARUSSIAN-YUGOSLAVIAN SYMPOSIUM ON PHYSICS AND DIAGNOSTICS OF LABORATORY & ASTROPHYSICAL PLASMA, 1996, : 121 - 121
  • [29] Stability of plasma-sprayed thermal barrier coatings: The role of the waviness of the bond coat and the thickness of the thermally grown oxide layer
    Skalka, P.
    Slamecka, K.
    Pokluda, J.
    Celko, L.
    SURFACE & COATINGS TECHNOLOGY, 2015, 274 : 26 - 36
  • [30] Microstructural and thermal properties of plasma sprayed mullite coatings
    Di Girolamo, Giovanni
    Blasi, Caterina
    Pilloni, Luciano
    Schioppa, Monica
    CERAMICS INTERNATIONAL, 2010, 36 (04) : 1389 - 1395