Phase Evolution during the Sintering of Submicron Ti(C,N)-Based Cermets

被引：3
|
作者：
Chenhui Li
机构：
来源：
Rare Metals | 2001年 / 04期
基金：
中国国家自然科学基金;
关键词：
submicron; cermet; phase; sintering;
D O I：
暂无
中图分类号：
TQ174 [陶瓷工业];
学科分类号：
0805 ; 080502 ;
摘要：
The submicron powder mixtures of TiC-TiN-WC-Mo-C-Ni sintered at 1400℃ or below in vacuum were studied by X-ray diffration （XRD）, scanning electron microscopy （SEM） and transmission electron microscopy （TEM） analyses. The results showed that Mo2C fOrmed at 800℃ or below. Both WC and Mo2C disappeared at 1200 ℃, and TiN disappeared at 1250℃. In addihon, the variahons of lanice constans of the htanium carbonitride and nickel binder phase with sintering temperature were experimentally obtained, and the reason was analyzed.
引用
收藏
页码：248 / 254
页数：7
相关论文
共 50 条
  • [21] Microstructure and phase transformation of Ti(C,N)/Fe-Co-Ni cermets during sintering process
    Zhu G.
    Xie M.
    Liu Y.
    Chen J.
    Chen Y.
    Wang S.
    Xie, Ming (powder@ipm.com.cn), 1600, Editorial Office of Chinese Journal of Rare Metals (40): : 1220 - 1225
  • [22] Study on the phase evolution, microstructure and densification behavior of (Ti,M)(C,N)-based cermets
    Xiong, Zhengzhuo
    Ye, Jinwen
    Liu, Ying
    Yang, Xiaojiao
    Cao, Qian
    MATERIALS CHEMISTRY AND PHYSICS, 2020, 240 (240)
  • [23] Influences of Ultrafine Ti(C, N) on the Sintering Process and Mechanical Properties of Micron Ti(C, N)-Based Cermets
    Ma, Lili
    Zhao, Zaiyang
    Wu, Yurong
    Sun, Jingjing
    Gu, Siyong
    Zhang, Houan
    MATERIALS, 2023, 16 (08)
  • [24] Effect of sintering process on properties of Ti(C, N) cermets
    Chen, Ping
    Zhang, Hou-An
    Tang, Si-Wen
    Zhang, Xin
    Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2007, 28 (04): : 6 - 10
  • [25] Characterization of functionally gradient Ti (C, N)-based cermets fabricated by vacuum liquid phase sintering and nitriding treatment during cooling
    Zhao, Yijie
    Zheng, Yong
    Zhou, Wei
    Lv, Xuepeng
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2014, 46 : 20 - 23
  • [26] Microstructure Evolution and Phase Transformation of FeWB Based Cermets During the Vacuum Sintering
    Yu, Hongwei
    Li, Jun
    Li, Cheng
    Liu, Ying
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2018, 47 (02): : 463 - 468
  • [27] Microstructure Evolution and Phase Transformation of FeWB Based Cermets During the Vacuum Sintering
    Yu Hongwei
    Li Jun
    Li Cheng
    Liu Ying
    RARE METAL MATERIALS AND ENGINEERING, 2018, 47 (02) : 463 - 468
  • [28] Study of Ti(C,N)-based cermets fabricated by pressureless-HIP sintering
    Ni, XJ
    Qi, LH
    Wang, W
    Pan, W
    HIGH-PERFORMANCE CERAMICS III, PTS 1 AND 2, 2005, 280-283 : 1417 - 1420
  • [29] Effect of sintering temperature on the microstructure and mechanical properties of Ti(C, N)-based cermets
    Yonglin Yan
    Yong Zheng
    Haijun Yu
    Haijian Bu
    Xin Cheng
    Nengwei Zhao
    Powder Metallurgy and Metal Ceramics, 2007, 46 : 449 - 453
  • [30] Decomposition of Ni binder phase in Ti(C, N) based cermets
    Zackrisson, J
    Falk, LKL
    Andren, HO
    ELECTRON MICROSCOPY 1998, VOL 2: MATERIALS SCIENCE 1, 1998, : 827 - 828
12345