Hot compressive deformation behavior and constitutive relationship of Al-Zn-Mg-Zr alloy with trace amounts of Sc

被引:0
|
作者
李波 [1 ]
潘清林 [1 ,2 ]
李晨 [1 ]
张志野 [1 ]
尹志民 [1 ]
机构
[1] School of Materials Science and Engineering,Central South University
[2] Key Laboratory of Nonferrous Materials Science and Engineering of Ministry of Education (Central South University)
关键词
Al-Zn-Mg-Sc-Zr alloy; hot deformation behavior; flow stress; constitutive equation;
D O I
暂无
中图分类号
TG146.21 [];
学科分类号
摘要
The hot deformation behaviors of Al-Zn-Mg-Sc-Zr alloy were investigated in a temperature range of 340 500°C and a strain rate range of 0.001 10 s 1using uniaxial compression test on Gleeble-1500 thermal simulation machine.The results show that the flow stress increases with increasing strain and tends to be constant after a peak value.The flow stress increases with increasing strain rate and decreases with increasing deformation temperature.The phenomenon of dynamic recovery and dynamic recrystallization can be observed by microstructural evolutions.Based on the hyperbolic Arrhenius-type equation,the true stress true strain data from the tests were employed to establish the constitutive equation considering the effect of the true strain on material constants(,β,Q,n and A),which reveals the dependence of the flow stress on strain,strain rate and deformation temperature.The predicted stress strain curves are in good agreement with experimental results,which confirms that the developed constitutive equations are suitable to research the hot deformation behaviors of Al-Zn-Mg-Sc-Zr alloy.
引用
收藏
页码:2939 / 2946
页数:8
相关论文
共 50 条
  • [41] Effects of trace amounts of Zr and Sc on the recrystallization behavior and mechanical properties of Al-4.5Zn-1.6Mg alloys
    Tzeng, Yu-Chih
    Chung, Chen-Yuan
    Chien, Hui-Ching
    MATERIALS LETTERS, 2018, 228 : 270 - 272
  • [42] Investigation of hot deformation behavior and optimization of hot workability for a novel Zr, Sc alloyed Al-Mg-Mn alloy
    Liu, Chang
    Liu, Yu
    Huang, Yuanchun
    Sheng, Zhiyong
    Fan, Xi
    Wu, Zhangxi
    Feng, Wei
    Liu, Pengfei
    JOURNAL OF ALLOYS AND COMPOUNDS, 2025, 1017
  • [43] Study on the Constitutive Behavior and Hot Deformation Characteristic of Mg-4Sm-2Zn-0.5Zr Alloy
    Cai, Zhong-Yi
    Che, Chao-jie
    Chang, Ruo-Han
    Cheng, Li-Ren
    Chen, Qing-Min
    INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2019, 20 (03) : 407 - 415
  • [44] Hot deformation behavior and processing map of a new type Al-Zn-Mg-Er-Zr alloy
    Wu, H.
    Wen, S. P.
    Huang, H.
    Gao, K. Y.
    Wu, X. L.
    Wang, W.
    Nie, Z. R.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2016, 685 : 869 - 880
  • [45] Recrystallization behavior and its relationship with deformation mechanisms of a hot rolled Mg-Zn-Ca-Zr alloy
    Victoria-Hernandez, J.
    Yi, S.
    Klaumuenzer, D.
    Letzig, D.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 761
  • [46] Constitutive behavior and novel characterization of hot deformation of Al-Zn-Mg-Cu aluminum alloy for lightweight traffic
    Xindi, Hao
    Dong, Ren
    Juan, Dong
    Zong, Haiming
    Zhengfeng, Lv
    MATERIALS RESEARCH EXPRESS, 2021, 8 (01)
  • [47] Constitutive Analysis and Hot Deformation Behavior of Homogenized Al-3Mg Alloy
    P. M. Keshtiban
    F. Bashirzadeh
    JOM, 2023, 75 : 905 - 913
  • [48] Constitutive Analysis and Hot Deformation Behavior of Homogenized Al-3Mg Alloy
    Keshtiban, P. M.
    Bashirzadeh, F.
    JOM, 2023, 75 (03) : 905 - 913
  • [49] Hot tensile deformation behaviors and constitutive model of an Al-Zn-Mg-Cu alloy
    Zhou, Mi
    Lin, Y. C.
    Deng, Jiao
    Jiang, Yu-Qiang
    MATERIALS & DESIGN, 2014, 59 : 141 - 150
  • [50] Hot compressive deformation behavior and microstructure characteristics of new ultra strength Al-Zn-Mg-Cu alloy
    Wang Yu
    Xiong Bai-ping
    Li Zhi-hui
    Wen Kai
    Huang Shu-hui
    Li Xi-wu
    Zhang Yong-an
    CAILIAO GONGCHENG-JOURNAL OF MATERIALS ENGINEERING, 2019, 47 (02): : 99 - 106