Hot compressive deformation behavior and constitutive relationship of Al-Zn-Mg-Zr alloy with trace amounts of Sc

被引:0
|
作者
李波 [1 ]
潘清林 [1 ,2 ]
李晨 [1 ]
张志野 [1 ]
尹志民 [1 ]
机构
[1] School of Materials Science and Engineering,Central South University
[2] Key Laboratory of Nonferrous Materials Science and Engineering of Ministry of Education (Central South University)
关键词
Al-Zn-Mg-Sc-Zr alloy; hot deformation behavior; flow stress; constitutive equation;
D O I
暂无
中图分类号
TG146.21 [];
学科分类号
摘要
The hot deformation behaviors of Al-Zn-Mg-Sc-Zr alloy were investigated in a temperature range of 340 500°C and a strain rate range of 0.001 10 s 1using uniaxial compression test on Gleeble-1500 thermal simulation machine.The results show that the flow stress increases with increasing strain and tends to be constant after a peak value.The flow stress increases with increasing strain rate and decreases with increasing deformation temperature.The phenomenon of dynamic recovery and dynamic recrystallization can be observed by microstructural evolutions.Based on the hyperbolic Arrhenius-type equation,the true stress true strain data from the tests were employed to establish the constitutive equation considering the effect of the true strain on material constants(,β,Q,n and A),which reveals the dependence of the flow stress on strain,strain rate and deformation temperature.The predicted stress strain curves are in good agreement with experimental results,which confirms that the developed constitutive equations are suitable to research the hot deformation behaviors of Al-Zn-Mg-Sc-Zr alloy.
引用
收藏
页码:2939 / 2946
页数:8
相关论文
共 50 条
  • [31] Constitutive Model of Hot Plastic Deformation and Flow Behavior Prediction of Mg-Zn-Zr-Y Alloy
    Chen Baodong
    Guo Feng
    Wen Jing
    Ma Wen
    Cai Huisheng
    Liu Liang
    RARE METAL MATERIALS AND ENGINEERING, 2017, 46 (11) : 3305 - 3310
  • [32] Constitutive modeling for the hot deformation behavior of Mg-3.06Zn-0.58Zr-1.07Y alloy
    Chen, B. D.
    Guo, F.
    Wen, J.
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2015, 46 (08) : 835 - 843
  • [33] Hot compressive deformation behavior of Mg-Zn-Y-Zr alloy under low strain rate
    Zheng, Runguo
    Lin, Xiaoping
    Fan, Zhibin
    MATERIALS RESEARCH EXPRESS, 2019, 6 (12)
  • [34] Hot deformation behavior of Al-Cu-Li-Mg-Zr alloy containing Zn and Mn
    Chen Yong-lai
    Li Jin-feng
    Lue Hong-jun
    Li Shi-chen
    Zheng Zi-qiao
    Zhang Yu-wei
    Zhang Xu-hu
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2007, 17 : S271 - S275
  • [35] Hot deformation behavior of Al-Cu-Li-Mg-Zr alloy containing Zn and Mn
    陈永来
    李劲风
    吕宏军
    李世晨
    郑子樵
    张宇伟
    张绪虎
    Transactions of Nonferrous Metals Society of China, 2007, (S1) : 271 - 275
  • [36] Superplasticity behaviors of Al-Zn-Mg-Zr cold-rolled alloy sheet with minor Sc addition
    Xiang, H.
    Pan, Q. L.
    Yu, X. H.
    Huang, X.
    Sun, X.
    Wang, X. D.
    Li, M. J.
    Yin, Z. M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 676 : 128 - 137
  • [37] Superplasticity and High Strength in Al-Zn-Mg-Zr Alloy with Ultrafine Grains
    Valiev, Ruslan Z.
    Kazykhanov, Vil U.
    Mavlyutov, Aydar M.
    Yudakhina, Anna A.
    Chinh, Nguyen Q.
    Murashkin, Maxim Yu
    ADVANCED ENGINEERING MATERIALS, 2020, 22 (01)
  • [38] Hot deformation behavior of extruded Mg-Zn-Y-Zr alloy
    Xia, Xiangsheng
    Chen, Qiang
    Huang, Shuhai
    Lin, Jun
    Hu, Chuankai
    Zhao, Zude
    JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 644 : 308 - 316
  • [39] Investigation of the hot deformation behavior of an Al-Mg-Sc-Zr alloy under plane strain condition
    Taendl, Johannes
    Dikovits, Martina
    Poletti, Cecilia
    MATERIAL FORMING ESAFORM 2014, 2014, 611-612 : 76 - 83
  • [40] Constitutive Equation and Hot Compression Deformation Behavior of Homogenized Al-7.5Zn-1.5Mg-0.2Cu-0.2Zr Alloy
    He, Jianliang
    Zhang, Datong
    Zhang, Weiweng
    Qiu, Cheng
    Zhang, Wen
    MATERIALS, 2017, 10 (10):