A Study on the Wear Behaviour of Dual Phase Steels

被引：0

作者：

V.Abouei ^{[1
]}

H.Saghafian ^{[1
]}

Sh.Kheirandish ^{[1
]}

Kh.Ranjbar ^{[2
]}

机构：

[1] Department of Metallurgy and Materials Engineering,Iran University of Science and Technology,Iran

[2] Shahid Chamran University,Iran

来源：

Journal of Materials Science & Technology | 2007年 / 01期

关键词：

Wear; Dual phase steel; Microstructure;

D O I：

暂无

中图分类号：

TG115.58 [];

学科分类号：

080502 ;

摘要：

Dual phase (DP) steels containing four different amounts of martensite ranging from 43 vol. pct to 81 vol. pct have been developed from 0.2 wt pct carbon steel by intercritical heat treatment at a fixed temperature of 780℃with varying holding times followed by water quenching. Dry sliding wear tests have been conducted on DP steels using a pin- on-disk machine under different normal loads of 61.3, 68.5, 75.7 and 82.6 N and at a constant sliding speed of 1.20 m/s. At these loads, the mechanism of wear is primarily delamination, which has been confirmed by SEM micrographs of subsurface and wear debris of samples. Wear properties have been found to improve with the increase in martensite volume fraction in dual phase steels.

引用

页码：109 / 112

页数：4

共 50 条

[41] Influence of microstructure and strain rate on the strain partitioning behaviour of dual phase steels
Das, Anindya
Tarafder, Soumitra
Sivaprasad, S.
Chakrabarti, Debalay
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 754 : 348 - 360
[42] Dry sliding wear behavior of low carbon dual phase powder metallurgy steels
Tekeli, S.
Gural, A.
Ozyurek, D.
[J]. MATERIALS & DESIGN, 2007, 28 (05): : 1685 - 1688
[43] A study of the unloading behaviour of dual phase steel
Govik, Alexander
Rentmeester, Rikard
Nilsson, Larsgunnar
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 602 : 119 - 126
[44] An evaluation of the wear behaviour of a dual-phase low-carbon steel
Aksoy, M
Karamis, MB
Evin, E
[J]. WEAR, 1996, 193 (02) : 248 - 252
[45] Mild oxidative wear behaviour of plain carbon dual-phase steel
Abouei, V.
Saghafian, H.
Kheirandish, Sh.
Ranjbar, Kh.
[J]. STEEL RESEARCH INTERNATIONAL, 2007, 78 (06) : 506 - 511
[46] ANISOTROPY IN DUAL PHASE STEELS
MAINVILLE, J
CRAWLEY, AF
LESPERANCE, GL
[J]. CIM BULLETIN, 1985, 78 (878): : 87 - 87
[47] Adhesive wear behaviour of carbide composites and tool steels
Annuka, H
Klaasen, H
Kübarsepp, J
Suvi, V
[J]. PROCEEDINGS OF THE 4TH INTERNATIONAL CONFERENCE OF DAAAM NATIONAL ESTONIA, 2004, : 175 - 176
[48] Influence of the heat treatment path on the martensite phase and dry reciprocating wear behavior of dual-phase steels
Bidmeshki, Cyrus
Shokuhfar, Ali
Abouei, Vahid
[J]. METALLURGICAL RESEARCH & TECHNOLOGY, 2016, 113 (02) : 203 - U45
[49] MICROANALYSIS OF DUAL PHASE STEELS
WYCLIFFE, P
[J]. SCRIPTA METALLURGICA, 1984, 18 (04): : 327 - 332
[50] The effect of coating and nitriding on the wear behaviour of tool steels
Zeghni, AE
Hashmi, MSJ
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 155 : 1918 - 1922

← 1 2 3 4 5 →