Fatigue cyclic loading test of an auro-galvanoforming ceramic bridge

被引:0
|
作者
ZHANG XianghaoSUN FengWANG Huan and XU Manqiong Outpatient Dental CenterPeking University School of StomatologyBeijing China Department of Engineering MechanicsTsinghua University Beijing China [100034 ,100084 ]
机构
关键词
D O I
暂无
中图分类号
R78 [口腔科学];
学科分类号
1003 ;
摘要
Background In dental clinics,dentition defects are commonly restored with conventional porcelain-fused-to-metal fixed bridges.However,Ni-Cr alloy ceramic fixed bridges are known to have several drawbacks such as marginal coloration of the neck,low casting precision and,most seriously,poor biocompatibility.These problems could be circumvented by using noble metal ceramic bridges;however,one negative issue related to the conventional noble metal ceramic bridges is its high price due to the use of a large amount of gold for pontic.Therefore,an auro-galvanoforming ceramic bridge would be ideal to retain the advantages of a conventional material,yet reduce the amount of noble metal used.This study aimed to investigate whether any destructive changes occur to the auro-galvanoforming ceramic bridge under a fatigue cyclic loading test. Methods On standard models which the left maxillary first premolar is lost and with the cuspid teeth and the second premolar as the fixed bridge abutment teeth,six maxillary auro-galvanoforming ceramic bridges and six corresponding nichrome ceramic jointed crowns were made as group A,six nichrome ceramic bridges and six corresponding nichrome ceramic jointed crowns were made as group B(control group).And then all specimens were fixed and tested on a fatigue cyclic loading machine;the changes occurring to the surfaces of occlusal contact with large functional area and to the porcelain-metal interfaces of the nichrome primary copings margins were observed through a scanning electron microscope(SEM). Results In 120 hours’ continual observation,none of the specimens had porcelain coating fractures or scraping occurrence and all of the porcelain coatings had been kept intact under sinusoidal cyclic loading with the load range of 120-200 N and frequency of 5 Hz. Conclusions Auro-galvanoforming ceramic bridges exhibited excellent fatigue strength in the fatigue cyclic loading test and may satisfy the clinical demand in theory,while the practical application shall be evaluated by observations in long-term clinical usage.
引用
收藏
页码:1896 / 1899
相关论文
共 50 条
  • [41] Environmental effect on cyclic fatigue behaviour in ceramic materials
    Trukuba Lab, Tsukuba, Japan
    J Mater Sci, 6 (1565-1569):
  • [42] FEM analysis on cyclic fatigue of ceramic/metal joints
    Huh, J.-W.
    Kobayashi, H.
    Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 1996, 62 (604): : 2669 - 2674
  • [43] Fatigue test of metal rubber bridge bearings
    Zhang H.
    Xia X.
    Qiao X.
    Zhu Z.
    Dai S.
    Zhendong yu Chongji/Journal of Vibration and Shock, 2024, 43 (06): : 273 - 279
  • [44] Low cyclic loading tests and fatigue damage models of concrete bridge piers reinforced with high-strength rebar
    Zhuo, Wei-ding
    Wu, Suiwen
    Liu, Zhao
    Zang, Hua
    ADVANCES IN STRUCTURAL ENGINEERING, 2021, 24 (04) : 706 - 717
  • [45] CLOSURE OF FATIGUE CRACKS UNDER CYCLIC TENSILE LOADING
    OHJI, K
    OGURA, K
    OHKUBO, Y
    INTERNATIONAL JOURNAL OF FRACTURE, 1974, 10 (01) : 123 - 124
  • [46] Kinetics of fatigue cracks under cyclic thermomechanical loading
    Troshchenko, VT
    Kravchuk, LV
    Kononuchenko, OV
    Zadvornyi, EO
    MATERIALS SCIENCE, 2001, 37 (02) : 174 - 183
  • [47] Composite army bridges under fatigue cyclic loading
    Abdi, Frank
    Qian, Zhongyan
    Mosallam, Ayman
    Iyer, Ramki
    Wang, Jian-Juei
    Logan, Trent
    STRUCTURE AND INFRASTRUCTURE ENGINEERING, 2006, 2 (01) : 63 - 73
  • [48] Thermal cyclic fatigue damage evolution of fiber-reinforced ceramic-matrix composites under constant loading
    Li, Longbiao
    Reynaud, Pascal
    Fantozzi, Gilbert
    COMPOSITE INTERFACES, 2022, 29 (09) : 1033 - 1052
  • [49] THE MICROMECHANICS OF AMBIENT-TEMPERATURE CYCLIC FATIGUE LOADING IN A COMPOSITE OF CAS GLASS-CERAMIC REINFORCED WITH NICALON FIBERS
    ROUSSEAU, CQ
    DAVIDSON, DL
    CAMPBELL, JB
    JOURNAL OF COMPOSITES TECHNOLOGY & RESEARCH, 1994, 16 (02): : 115 - 126
  • [50] The fatigue damage of a particulate composite under cyclic loading
    Guan, E
    Hsu, T
    Chiang, F
    PROCEEDINGS OF THE SEM IX INTERNATIONAL CONGRESS ON EXPERIMENTAL MECHANICS, 2000, : 159 - 162