Fatigue cyclic loading test of an auro-galvanoforming ceramic bridge

被引:0
|
作者
ZHANG XianghaoSUN FengWANG Huan and XU Manqiong Outpatient Dental CenterPeking University School of StomatologyBeijing China Department of Engineering MechanicsTsinghua University Beijing China [100034 ,100084 ]
机构
关键词
D O I
暂无
中图分类号
R78 [口腔科学];
学科分类号
1003 ;
摘要
Background In dental clinics,dentition defects are commonly restored with conventional porcelain-fused-to-metal fixed bridges.However,Ni-Cr alloy ceramic fixed bridges are known to have several drawbacks such as marginal coloration of the neck,low casting precision and,most seriously,poor biocompatibility.These problems could be circumvented by using noble metal ceramic bridges;however,one negative issue related to the conventional noble metal ceramic bridges is its high price due to the use of a large amount of gold for pontic.Therefore,an auro-galvanoforming ceramic bridge would be ideal to retain the advantages of a conventional material,yet reduce the amount of noble metal used.This study aimed to investigate whether any destructive changes occur to the auro-galvanoforming ceramic bridge under a fatigue cyclic loading test. Methods On standard models which the left maxillary first premolar is lost and with the cuspid teeth and the second premolar as the fixed bridge abutment teeth,six maxillary auro-galvanoforming ceramic bridges and six corresponding nichrome ceramic jointed crowns were made as group A,six nichrome ceramic bridges and six corresponding nichrome ceramic jointed crowns were made as group B(control group).And then all specimens were fixed and tested on a fatigue cyclic loading machine;the changes occurring to the surfaces of occlusal contact with large functional area and to the porcelain-metal interfaces of the nichrome primary copings margins were observed through a scanning electron microscope(SEM). Results In 120 hours’ continual observation,none of the specimens had porcelain coating fractures or scraping occurrence and all of the porcelain coatings had been kept intact under sinusoidal cyclic loading with the load range of 120-200 N and frequency of 5 Hz. Conclusions Auro-galvanoforming ceramic bridges exhibited excellent fatigue strength in the fatigue cyclic loading test and may satisfy the clinical demand in theory,while the practical application shall be evaluated by observations in long-term clinical usage.
引用
收藏
页码:1896 / 1899
相关论文
共 50 条
  • [1] Fatigue cyclic loading test of an auro-galvanoforming ceramic bridge
    Zhang Xiang-hao
    Sun Feng
    Wang Huan
    Xu Man-qiong
    CHINESE MEDICAL JOURNAL, 2008, 121 (19) : 1896 - 1899
  • [2] Clinical follow-up of ceramic bridges with auro-galvanoforming primary coping and Ni-Cr pontic for restoration of dentition defects
    ZHANG Xianghao and SUN Feng Outpatient Dental Center Peking University School of Stomatology Beijing China Zhang XH and Sun F
    中华医学杂志(英文版), 2009, (24) : 3007 - 3010
  • [3] Clinical follow-up of ceramic bridges with auro-galvanoforming primary coping and Ni-Cr pontic for restoration of dentition defects
    Zhang Xiang-hao
    Sun Feng
    CHINESE MEDICAL JOURNAL, 2009, 122 (24) : 3007 - 3010
  • [4] FATIGUE DESIGN CRITERIA FOR CERAMIC COMPONENTS UNDER CYCLIC LOADING
    BUXBAUM, O
    SONSINO, CM
    ESPER, FJ
    INTERNATIONAL JOURNAL OF FATIGUE, 1994, 16 (04) : 257 - 265
  • [5] Monitoring the fatigue crack on the test specimen during the cyclic loading
    Sapieta, Milan
    Sulka, Peter
    Svoboda, Martin
    XXII SLOVAK-POLISH SCIENTIFIC CONFERENCE ON MACHINE MODELLING AND SIMULATIONS 2017 (MMS 2017), 2018, 157
  • [6] Fatigue damage failure behavior of steel bridge pavement under cyclic loading
    Xu X.
    Yang W.
    Huang W.
    Ji T.
    Li X.
    Chu L.
    Zhendong yu Chongji/Journal of Vibration and Shock, 2020, 39 (07): : 59 - 66
  • [7] Fatigue damage in ceramic coatings from cyclic contact loading with a tangential component
    Zhang, Yu
    Kim, Jae-Won
    Kim, Joo-Hyung
    Lawn, Brian R.
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2008, 91 (01) : 198 - 202
  • [8] Fatigue behaviour of piezoelectric ceramic stack under large cyclic dynamic loading
    Ding, Guangya
    Xing, Zijun
    Chen, Naiyu
    Wang, Jun
    Shi, Li
    JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 2023, 34 (15) : 1809 - 1824
  • [9] LOW CYCLE FATIGUE EVALUATION USING CYCLIC LOADING TEST DATA
    Hojo, Kiminobu
    Kawabata, Shinichi
    ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2015, VOL 1A, 2015,
  • [10] CYCLIC FATIGUE IN CERAMIC MATERIALS
    EVANS, AG
    LINZER, M
    FULLER, ER
    BULLETIN OF THE AMERICAN PHYSICAL SOCIETY, 1974, 19 (03): : 367 - 367