The influence of nano additives on the mechanical behavior of thermosetting polymeric materials with potential for additive manufacturing

被引：0
|
作者：
Stefan, Adriana [1 ]
Cristea, George C. [2 ]
Pelin, George [2 ]
Dragomirescu, Alina [2 ]
Krawczyk, Krzysztof K. [3 ]
Wheeldon, Alexander [3 ]
机构：
[1] Natl Inst Aerosp Res Elie Carafoli, Struct & Mat Div, INCAS, Bucharest 061126, Romania
[2] Natl Inst Aerosp Res Elie Carafoli, Mat & Tribol Unit, INCAS, Bucharest 061126, Romania
[3] Joanneum Res Forsch mbH A, Inst Surface Technol & Photon, Sensors & Funct Printing, Joanneum Res, A-8160 Weiz, Austria
来源：
AIAA SCITECH 2024 FORUM | 2024年
关键词：
FIBER-REINFORCED POLYAMIDE-6; HEAT DISTORTION TEMPERATURE; GLASS-FIBER; NANOCOMPOSITES; POLYPROPYLENE; MORPHOLOGY;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
This scientific article presents a comprehensive investigation of the tribological and heat deflection temperature (HDT) properties of epoxy resin specimens additivated with functionalized silica (SiO2) nanoparticles. The objective of this research is to assess the effect of incorporating functionalized SiO2 nanoparticles on the behavior of the epoxy resin and to prepare the materials for 3D printing applications using a Pixdro LP50 printing platform, equipped with a double printhead assembly. Specimens made of epoxy resins without additives and those additivated with silica nanoparticles were cast and tribologically tested. In order to evaluate the tribological behavior, tests were carried out in dry mode, with the block-on-ring module of the tribology installation. The experiments were conducted using specimens made from an epoxy resin composite with varying concentrations of the hardening agent. Additionally, the study investigated the influence of additives at two different concentrations.
引用
收藏
页数：12
相关论文
共 50 条
  • [21] Novel polymeric support materials for jetting based additive manufacturing processes
    Fahad, M.
    Dickens, P.
    Gilbert, M.
    RAPID PROTOTYPING JOURNAL, 2013, 19 (04) : 230 - 239
  • [22] Mechanical strength of adhesively bonded joints using polymeric additive manufacturing
    Spaggiari, A.
    Denti, F.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2021, 235 (10) : 1851 - 1859
  • [23] Investigating Additive Manufacturing Possibilities for an Unmanned Aerial Vehicle with Polymeric Materials
    Sostakaite, Laura
    Sapranauskas, Edvardas
    Rudinskas, Darius
    Rimkus, Arvydas
    Gribniak, Viktor
    POLYMERS, 2024, 16 (18)
  • [24] Mechanical Behavior of Polymeric Materials: Recent Studies
    Collar, Emilia P.
    Garcia-Martinez, Jesus-Maria
    POLYMERS, 2024, 16 (19)
  • [25] Influence of polymeric additives on the mechanical properties of α-tricalcium phosphate cement
    Dos Santos, LA
    De Oliveira, LC
    Rigo, ECS
    Carrodeguas, RG
    Boschi, AO
    De Arruda, ACF
    BONE, 1999, 25 (02) : 99S - 102S
  • [26] Thermal and mechanical behavior of biocomposites using additive manufacturing
    Montalvo Navarrete J.I.
    Hidalgo-Salazar M.A.
    Escobar Nunez E.
    Rojas Arciniegas A.J.
    International Journal on Interactive Design and Manufacturing, 2018, 12 (02) : 449 - 458
  • [27] Modeling of mechanical behavior in additive manufacturing at part scale
    Chen, Qiang
    Beauchesne, Erwan
    Arnaudeau, Francis
    Dahoo, Pierre-Richard
    Meis, Constantin
    8TH INTERNATIONAL CONFERENCE ON MATHEMATICAL MODELING IN PHYSICAL SCIENCE, 2019, 1391
  • [28] Corrosion behavior and degradation mechanism of polymeric materials - The approach of the degradation of organic materials mainly on thermosetting resins
    Kubouchi, Masatoshi
    Zairyo to Kankyo/ Corrosion Engineering, 2002, 51 (12): : 542 - 548
  • [29] Glass Waste Powders as Additives Based Ceramic Materials for Additive Manufacturing of Bricks
    Revelo, Carlos F.
    Martins, G. B. Henrique
    Delaqua, Geovana C. G.
    Vieira, Carlos M. F.
    Colorado, Henry A.
    TMS 2024 153RD ANNUAL MEETING & EXHIBITION: SUPPLEMENTAL PROCEEDINGS, 2024, : 547 - 558
  • [30] Mechanical Characterization of Cellulose Nanofibril Materials Made by Additive Manufacturing
    Mariani, Lisa M.
    Considine, John M.
    Turner, Kevin T.
    MECHANICS OF ADDITIVE AND ADVANCED MANUFACTURING, VOL 8, 2019, : 43 - 45
12345