Experimental and GEANT4 simulated FEPE of NaI(Tl) detector for linear sources

The current study investigated the geometry, design and solid angle impacts on full energy peak efficiency (FEPE) of NaI(Tl) detectors for a line source. A line source is fabricated using Tc-99m solution filled in a borosilicate glass tube of inner diameter 3 mm, tube wall thickness 2.5 mm and length 12.7 cm. The FEPE is measured for the fabricated linear source using 2 '' x2 '' NaI(Tl) cylindrical detector at various source-detector distances. The experimental setup is simulated in GEANT4 and the computed FEPE values are compared with experimental values. The absolute error of 5% is observed between computed and measured FEPE values. Utilizing the advantages of MC simulations, the impact of numerous source parameters such as source length, diameter, source-detector distance, glass tube thickness and lead shield effects on FEPE are investigated to optimize the fabrication process of linear sources. A case study for current investigation has been analyzed by considering absolute FEPE of the NaI(Tl) system for a syringe filled with radioactive solution. This study provides an insight for the fabrication of standard linear sources by analyzing different source parameters and hence, may serve as a guideline to prepare standard linear sources for the calibration of radiation detectors.