Study on the Differences of Electromigration Life betweeen BGA and QFP Solder Joints

被引：0
|
作者：
Zhang, Fei [1 ]
Chen, Shuai [1 ]
Liu, Zhidian [1 ]
机构：
[1] Xian Res Inst Nav Technol, Xian, Peoples R China
来源：
2022 23RD INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY, ICEPT | 2022年
关键词：
Electromigration life; BGA solder joint; QFP solder joint;
D O I：
10.1109/ICEPT56209.2022.9872717
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this paper, the different electromigration lives of BGA and QFP solder joints were studied under the average current density of 0.9x10(3)A/cm(2) at 125 degrees C. After EM 1171h, QFP solder joints first failed. From the appearance observation of the solder joints, a large amount of metal residue accumulation was observed outside the QFP solder joints, and no significant changes were observed outside the BGA solder joints. After the electromigration, the QFP solder joint structure changed from Cu/Cu6Sn5/solder/Cu6Sn5/Cu after reflow soldering into Cu/Cu3Sn/Cu6Sn5/Cu3Sn/Cu. Sn in the Sn63Pb37 solder in QFP solder joints were almost consumed, while Pb atoms were enriched outside the solder joints, and a large number of cracks formed at the interface near pin side in the solder joints. QFP solder joints failed earlier than BGA solder joints, which was because the solder in QFP solder joints was much lower than that in BGA solder joints, and then was consumed earlier than that in BGA solder joints.
引用
收藏
页数：3
相关论文
共 50 条
  • [1] Study on the fatigue life of the FC-BGA solder joints with Damage
    Gong Yubing
    Li QuanYong
    Yang Daoguo
    PROCEEDINGS OF THE SEVENTH IEEE CPMT CONFERENCE ON HIGH DENSITY MICROSYSTEM DESIGN, PACKAGING AND FAILURE ANALYSIS (HDP'05), 2005, : 94 - 98
  • [2] A STUDY ON PARAMETERS THAT IMPACT THE THERMAL FATIGUE LIFE OF BGA SOLDER JOINTS
    Deo, Karthik Arun
    Kono, Raymond-Noel
    Cai, Chongyang
    Yang, Junbo
    Lai, Yangyang
    Park, Seungbae
    PROCEEDINGS OF ASME 2022 INTERNATIONAL TECHNICAL CONFERENCE AND EXHIBITION ON PACKAGING AND INTEGRATION OF ELECTRONIC AND PHOTONIC MICROSYSTEMS, INTERPACK2022, 2022,
  • [3] Study on evaluation method of thermal fatigue life for BGA solder joints
    Kurashiki, Tetsusei
    Zako, Masaru
    Ishii, Atsushi
    Hanaki, Satoshi
    Sugitani, Munehiko
    Zairyo/Journal of the Society of Materials Science, Japan, 2003, 52 (05) : 535 - 540
  • [4] BGA solder joints
    Kongcharoen, Aviroot
    Trongjitwikrai, Suwan
    Netphu, Sommai
    Advanced Packaging, 2002, 11 (11): : 23 - 26
  • [5] Survey on Fatigue Life Prediction of BGA Solder Joints
    Qiu, Baojun
    Xiong, Jingang
    Wang, Han
    Zhou, Shuai
    Yang, Xiuding
    Lin, Zhengpei
    Liu, Maolin
    Cai, Nian
    ELECTRONICS, 2022, 11 (04)
  • [6] Electromigration in solder joints
    Yamanaka K.
    Yamanaka, Kimihiro, 1600, Japan Institute of Electronics Packaging (23): : 219 - 223
  • [7] Electromigration in solder joints and solder lines
    H. Gan
    W. J. Choi
    G. Xu
    K. N. Tu
    JOM, 2002, 54 : 34 - 37
  • [8] Effect of solder joint geometry on the predicted fatigue life of BGA solder joints
    Holub, IR
    Pitarresi, JM
    Singler, TJ
    INTERSOCIETY CONFERENCE ON THERMAL PHENOMENA IN ELECTRONIC SYSTEMS - I-THERM V, 1996, : 187 - 194
  • [9] Electromigration in solder joints and solder lines
    Gan, H
    Choi, WJ
    Xu, G
    Tu, KN
    JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY, 2002, 54 (06): : 34 - 37
  • [10] Electromigration study in flip chip solder joints
    Nah, Jae-Woong
    Chen, Kai
    Suh, J. O.
    Tu, K. N.
    57TH ELECTRONIC COMPONENTS & TECHNOLOGY CONFERENCE, 2007 PROCEEDINGS, 2007, : 1450 - +
12345