Research on High-Strength Economic Support Technology for Soft Rock Roadway with Roof Drenching under Thin Bedrock Irregular Surface

被引:1
|
作者
Wang, Junfeng [1 ,2 ]
Tai, Lianhai [3 ,4 ]
Li, Chong [3 ,4 ]
Qu, Qundi [3 ,4 ]
Yu, Xiaoxiao [3 ,4 ]
Liu, Yitao [3 ,5 ]
Yao, Wei [2 ]
机构
[1] Inner Mongolia Univ Sci & Technol, Coll Min & Coal, Baotou 014017, Peoples R China
[2] Ordos City Jintong Min Ind Co Ltd, Ordos 017000, Peoples R China
[3] China Univ Min & Technol, Sch Mines, Xuzhou 221116, Peoples R China
[4] China Univ Min & Technol, MOE Key Lab Deep Coal Resource Min, Xuzhou 221116, Peoples R China
[5] Uxin Banner Mengda Min Ind Co Ltd, Ordos 017399, Peoples R China
来源
APPLIED SCIENCES-BASEL | 2024年 / 14卷 / 20期
基金
中国国家自然科学基金;
关键词
nondestructive immersion test; mechanical properties; multistage bearing structure; anchor cable truss; zoning control; MECHANICAL-PROPERTIES; CRACK-PROPAGATION; FAILURE-MECHANISM; WATER INTRUSION; SENSITIVITY; MOISTURE;
D O I
10.3390/app14209428
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
The control of soft surrounding rock stability has always been a hot academic issue. Soft rock has poor stability and low strength, and the deformation of a soft rock tunnel becomes more serious after it is affected by water for a long time. In this paper, the Jintong Coal Mine is taken as the research object, and nondestructive immersion experiments are used to study the change in mechanical properties of rock after being affected by water. The FLAC numerical model is used to analyze the stress evolution characteristics of the surrounding rock after being affected by water, and the results of the study show that the water absorption of siltstone is always higher than that of coarse-grained sandstone, and the uniaxial compressive strength of siltstone and coarse-grained sandstone decreases by 54.59% and 67.99%, respectively, under a state of saturated water compared with that under a state of dryness. Influenced by a T-shaped surface, the maximum principal stress concentration area occurs in the rock layer below the T-shaped surface and outside the joint. Concentrations of maximum shear stress occur within the "T" channel. Vertical stress concentration zones occur at the higher ground level and the bottom of the slope. The maximum shear stress of the roof fluctuates before the face reaches the surface of the "1" section, and continues to increase with and continues to increase with the distance of the face. After entering below the surface of the "1" section, the maximum shear stress of the roof increases rapidly, and the influence range is about 24 m. The maximum shear stress distribution plays a dominant role in the stability of the surrounding rocks of the two roadways. We analyze the principle of high-strength economic support, propose a "four-in-one" surrounding rock control technology based on "controlled hydrophobicity, structural adjustment, district management, and gradient control", and propose a surrounding rock control scheme of district management. The measured data on site show that the roadway surrounding the rock is reasonably controlled. This provides a reference for the stable control of the surrounding rock of the roadway under similar conditions.
引用
收藏
页数:21
相关论文
共 47 条
  • [1] Research on high-strength coupling support technology of high stress extremely soft rock roadway
    Wang, Wei-Jun
    Peng, Gang
    Huang, Jun
    Meitan Xuebao/Journal of the China Coal Society, 2011, 36 (02): : 223 - 228
  • [2] New Type of High-strength Support in Deep Soft Rock Roadway
    Feng Jicheng
    Li Hongjiao
    Zhao Zhichao
    Zhang Wenlong
    APPLIED ENERGY TECHNOLOGY, PTS 1 AND 2, 2013, 724-725 : 1520 - +
  • [3] Research on roof falling mechanism and support technology of mining roadway in expansive soft rock
    Wang, Pu
    Zhang, Baisheng
    Wang, Lei
    Lin, Xueyao
    Song, Xiaofei
    Guo, Junqing
    Journal of Mining and Strata Control Engineering, 2020, 2 (02):
  • [4] High Strength Combined Support Technology in Deep High Stress Soft Rock Roadway
    Ma Nianjie
    Zhao Zhiqiang
    Zhao Hua
    Jiang Lishuai
    NATURAL RESOURCES AND SUSTAINABLE DEVELOPMENT II, PTS 1-4, 2012, 524-527 : 598 - 603
  • [5] Research on High Strength and Pre-stressed Coupling Support Technology in Deep Extremely Soft Rock Roadway
    Wang Z.
    Wang C.
    Wang X.
    Geotechnical and Geological Engineering, 2018, 36 (5) : 3173 - 3182
  • [6] Compound support technology for high stressed soft rock roadway
    Fu, Qiang
    Zhao, Yucheng
    Zhen, Yabin
    Electronic Journal of Geotechnical Engineering, 2014, 19 O : 3747 - 3756
  • [7] A case study on new high-strength temporary support technology of extremely soft coal seam roadway
    Xu, Zhijun
    Li, Chong
    Cao, Yue
    Tai, Lianhai
    Han, Jun
    SCIENTIFIC REPORTS, 2023, 13 (01): : 21333
  • [8] Research and Exploration on Combined Support Technology in Deep Soft-rock Roadway
    Ren, Lianwei
    Wang, Guangyong
    Wang, Long
    ADVANCES IN INDUSTRIAL AND CIVIL ENGINEERING, PTS 1-4, 2012, 594-597 : 616 - +
  • [9] Research on reinforced technology for deep soft rock and dynamic pressurized roadway under high stress
    Fang, Xin-Qiu
    He, Jie
    He, Jia-Sheng
    Yantu Lixue/Rock and Soil Mechanics, 2009, 30 (06): : 1693 - 1698
  • [10] Research on reinforced technology for deep soft rock and dynamic pressurized roadway under high stress
    Fang Xin-qiu
    He Jie
    He Jia-sheng
    ROCK AND SOIL MECHANICS, 2009, 30 (06) : 1693 - 1698