Reverse-polarity plasma cutting of rolled Ti-5Al-5V-5Mo titanium alloy thick plates

被引：0
|
作者：
Grinenko, A. V. [1 ]
Chumaevskii, A. V. [1 ]
Panfilov, A. O. [1 ]
Gurianov, D. A. [1 ]
Sidorov, E. A. [1 ]
Kolubaev, E. A. [1 ]
机构：
[1] Russian Acad Sci, Inst Strength Phys & Mat Sci, Siberian Branch, Tomsk, Russia
来源：
RUSSIAN PHYSICS JOURNAL | 2024年 / 67卷 / 10期
关键词：
Titanium alloy; Plasma cutting; Reverse polarity; Structure; Mode; Melting; Pores; 538.951; 620.18; 620.19;
D O I：
10.1007/s11182-024-03282-2
中图分类号：
O4 [物理学];
学科分类号：
0702 ;
摘要：
The paper presents research results of reverse-polarity plasma cutting of thick Ti-5Al-5V-5Mo titanium alloy plates. It is shown that 300 A current is the best for plasma cutting of 20 and 40 mm thick plates, and for 70-mm thick plates, the best is the current of 350 A. The surface layer includes the molten metal, oxide layers, and heat-affected zone. Traces of molten titanium are observed on the sample surface after its displacement from the work area by the water-air mixed flow. The use of the water mist generation system improves the quality of the work area, but does not reduce the material oxidation during cutting.
引用
收藏
页码：1562 / 1568
页数：7
相关论文
共 50 条
  • [41] Mechanisms of grain boundary α precipitation in the metastable β-titanium Ti-5Al-5Mo-5V-3Cr
    Thoudden-Sukumar, Prithiv
    Kloenne, Zachary
    Das, Saurabh Mohan
    Zheng, Yufeng
    Fraser, Hamish L.
    Gault, Baptiste
    Antonov, Stoichko
    ACTA MATERIALIA, 2024, 272
  • [42] Microstructure, texture and mechanical properties of hot rolled metastable β-titanium alloy Ti-5Al-3.5Mo-7.2V-3Cr
    Manda, Premkumar
    Nandam, Srinivasa Rao
    Chakkingal, Uday
    Singh, A. K.
    MATERIALS TODAY-PROCEEDINGS, 2017, 4 (02) : 851 - 856
  • [43] The ageing response of direct laser deposited metastable β-Ti alloy, Ti-5Al-5Mo-5V-3Cr
    Sharma, Deepak
    Kada, Sitarama Raju
    Fabijanic, Daniel
    Parfitt, David
    Chen, Bo
    Roebuck, Bryan
    Fitzpatrick, Michael E.
    Barnett, Matthew Robert
    ADDITIVE MANUFACTURING, 2021, 48
  • [44] Precipitation behaviour of single and duplex aged metastable β-Ti alloy, Ti-5Al-5Mo-5V-3Cr
    Sharma, Deepak
    Parfitt, David
    Roebuck, Bryan
    Kada, Sitarama Raju
    Fabijanic, Daniel
    Fitzpatrick, Michael E.
    MATERIALS SCIENCE AND TECHNOLOGY, 2022, 38 (14) : 1110 - 1117
  • [45] Characterization of the Interfacial Structure of Coarse Precipitates in a Metastable -Ti Alloy Ti-5Al-5Mo-5V-3Cr
    Zheng, Yufeng
    Clark, William A. T.
    Fraser, Hamish L.
    JOM, 2019, 71 (07) : 2291 - 2295
  • [46] Cyclic deformation response and micromechanisms of Ti alloy Ti-5Al-5V-5Mo-3Cr-0.5Fe
    Huang, Jun
    Wang, Zhirui
    Xue, Kemin
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (29-30): : 8723 - 8732
  • [47] Characterization of the Interfacial Structure of Coarse α Precipitates in a Metastable β-Ti Alloy Ti-5Al-5Mo-5V-3Cr
    Yufeng Zheng
    William A. T. Clark
    Hamish L. Fraser
    JOM, 2019, 71 : 2291 - 2295
  • [48] Isothermal omega formation and evolution in the Beta-Ti alloy Ti-5Al-5Mo-5V-3Cr
    Coakley, James
    Radecka, Anna
    Dye, David
    Bagot, Paul A. J.
    Stone, Howard J.
    Seidman, David N.
    Isheim, Dieter
    PHILOSOPHICAL MAGAZINE LETTERS, 2016, 96 (11) : 416 - 424
  • [49] An in situ investigation of the deformation mechanisms in a β-quenched Ti-5Al-5V-5Mo-3Cr alloy
    Barriobero-Vila, Pere
    Gussone, Joachim
    Kelm, Klemens
    Haubrich, Jan
    Stark, Andreas
    Schell, Norbert
    Requena, Guillermo
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 717 : 134 - 143
  • [50] Effects of Si addition on mechanical properties of Ti-5Al-5V-5Mo-3Cr alloy
    Qin, Dongyang
    Lu, Yafeng
    Liu, Qian
    Zhou, Lian
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 561 : 460 - 467
12345