Reverse-polarity plasma cutting of rolled Ti-5Al-5V-5Mo titanium alloy thick plates

被引：0
|
作者：
Grinenko, A. V. [1 ]
Chumaevskii, A. V. [1 ]
Panfilov, A. O. [1 ]
Gurianov, D. A. [1 ]
Sidorov, E. A. [1 ]
Kolubaev, E. A. [1 ]
机构：
[1] Russian Acad Sci, Inst Strength Phys & Mat Sci, Siberian Branch, Tomsk, Russia
来源：
RUSSIAN PHYSICS JOURNAL | 2024年 / 67卷 / 10期
关键词：
Titanium alloy; Plasma cutting; Reverse polarity; Structure; Mode; Melting; Pores; 538.951; 620.18; 620.19;
D O I：
10.1007/s11182-024-03282-2
中图分类号：
O4 [物理学];
学科分类号：
0702 ;
摘要：
The paper presents research results of reverse-polarity plasma cutting of thick Ti-5Al-5V-5Mo titanium alloy plates. It is shown that 300 A current is the best for plasma cutting of 20 and 40 mm thick plates, and for 70-mm thick plates, the best is the current of 350 A. The surface layer includes the molten metal, oxide layers, and heat-affected zone. Traces of molten titanium are observed on the sample surface after its displacement from the work area by the water-air mixed flow. The use of the water mist generation system improves the quality of the work area, but does not reduce the material oxidation during cutting.
引用
收藏
页码：1562 / 1568
页数：7
相关论文
共 50 条
  • [31] The effect of surface oxidation behavior on the fracture toughness of Ti-5Al-5Mo-5V-1Cr-1Fe titanium alloy
    Shi, Xiaohui
    Zeng, Weidong
    Zhao, Qinyang
    Journal of Alloys and Compounds, 2015, 647 : 740 - 749
  • [32] Microstructure and high cycle fatigue fracture surface of a Ti-5Al-5Mo-5V-1Cr-1Fe titanium alloy
    Wu, G. Q.
    Shi, C. L.
    Sha, W.
    Sha, A. X.
    Jiang, H. R.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 575 : 111 - 118
  • [33] Effect of microstructure on high cycle fatigue behavior of Ti-5Al-5Mo-5V-3Cr-1Zr titanium alloy
    Huang, Chaowen
    Zhao, Yongqing
    Xin, Shewei
    Tan, Changsheng
    Zhou, Wei
    Li, Qian
    Zeng, Weidong
    INTERNATIONAL JOURNAL OF FATIGUE, 2017, 94 : 30 - 40
  • [34] The electrochemical corrosion behavior of Ti-5Al-5Mo-5V-1Cr-1Fe titanium alloy with different initial microstructures
    Li, Hui
    Wang, Baogang
    Yang, Junsheng
    Xiao, Gan
    Tan, Siwei
    MATERIALS TODAY COMMUNICATIONS, 2024, 39
  • [35] The Effect of Isothermal Forging Parameters on the Microstructure and Properties of Ti-5Al-5Mo-5V-1Cr-1Fe Titanium Alloy
    Guo, Hongzhen
    Wang, Xiaoyan
    Zhao, Zhanglong
    Wang, Tao
    Yao, Zekun
    MANUFACTURING SCIENCE AND ENGINEERING, PTS 1-5, 2010, 97-101 : 301 - 305
  • [36] Influence of characteristic properties of PCD grades on the wear development in turning of β-titanium alloy (Ti5Al5V5Mo3Cr)
    Sadik, M. Ibrahim
    Coronel, Ernesto
    Lattemann, Martina
    WEAR, 2019, 426 : 1594 - 1602
  • [37] The effect of surface oxidation behavior on the fracture toughness of Ti-5Al-5Mo-5V-1Cr-1Fe titanium alloy
    Shi, Xiaohui
    Zeng, Weidong
    Zhao, Qinyang
    JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 647 : 740 - 749
  • [38] Microstructural characterization of laser melting deposited Ti-5Al-5Mo-5V-1Cr-1Fe near β titanium alloy
    Liu, C. M.
    Tian, X. J.
    Tang, H. B.
    Wang, H. M.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 572 : 17 - 24
  • [39] High cycle fatigue behavior of Ti-5Al-5Mo-5V-3Cr-1Zr titanium alloy with lamellar microstructure
    Huang, Chaowen
    Zhao, Yongqing
    Xin, Shewei
    Tan, Changsheng
    Zhou, Wei
    Li, Qian
    Zeng, Weidong
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 682 : 107 - 116
  • [40] Nanoindentation and Microstructure in the Shear Band in a Near Beta Titanium Alloy Ti-5Al-5Mo-5V-1Cr-1Fe
    Wang, Bingfeng
    Ding, Xu
    Mao, Ying
    Liu, Lanyi
    Zhang, Xiaoyong
    MATERIALS, 2019, 12 (24)
12345