Experimental validation of a wave-height sensor based on a MEMS piezoresistive cantilever and a waterproof film

被引：0
|
作者：
Shimada, Kyota [1 ]
Kishimoto, Takuto [1 ]
Takahashi, Hidetoshi [1 ,2 ]
机构：
[1] Keio Univ, Sch Integrated Design Engn, Grad Sch Sci & Technol, 3-14-1 Hiyoshi,Kouhoku Ku, Yokohama, Kanagawa 2238522, Japan
[2] Keio Univ, Fac Sci & Technol, Dept Mech Engn, 3-14-1 Hiyoshi,Kouhoku Ku, Yokohama, Kanagawa 2238522, Japan
来源：
JAPANESE JOURNAL OF APPLIED PHYSICS | 2024年 / 63卷 / 12期
基金：
日本科学技术振兴机构;
关键词：
wave height sensor; piezoresistive cantilever; pressure sensor; SURFACE-WAVES; PRESSURE; SPOTTER; BUOY;
D O I：
10.35848/1347-4065/ad9fc4
中图分类号：
O59 [应用物理学];
学科分类号：
摘要：
This paper presents a barometric pressure-sensing wave-height sensor that employs a microelectromechanical system piezoresistive cantilever, an air chamber, and a micromesh waterproof film. The developed sensor has a height resolution of less than 5 mm in the 0.01-10 Hz frequency band and a high time resolution with 100 Hz sampling rate. We conducted wave height measurements at sea using the developed sensor and compared its performance with that of a commercial global positioning system buoy-type wave-height sensor.
引用
收藏
页数：4
相关论文
共 50 条
  • [21] Design and measurement of a piezoresistive ultrasonic sensor based on MEMS
    于佳琪
    何常德
    宛克敬
    廉德钦
    薛晨阳
    张文栋
    Journal of Semiconductors, 2013, 34 (07) : 116 - 122
  • [22] Biomechanical analysis of yeast cell based a piezoresistive cantilever sensor
    Xu, Wenkui
    Chen, Liguo
    Huang, Haibo
    Zhang, Leilei
    Li, Xiangpeng
    Li, Yadi
    Sun, Lining
    2016 IEEE INTERNATIONAL CONFERENCE ON REAL-TIME COMPUTING AND ROBOTICS (IEEE RCAR), 2016, : 379 - 384
  • [23] Optimization of SCR for Sensitivity Enhancement of Cantilever based Piezoresistive Sensor
    Shahid, Tayyab
    Izhar, Umer
    Ali, Abid
    Shahid, Talha
    Janjua, Taha
    2016 2ND INTERNATIONAL CONFERENCE ON ROBOTICS AND ARTIFICIAL INTELLIGENCE (ICRAI), 2016, : 136 - 140
  • [24] HIGHLY SENSITIVE PULSE WAVE SENSOR WITH A PIEZORESISTIVE CANTILEVER INSIDE AN AIR CHAMBER
    Mizuki, Yuya
    Thanh-Vinh Nguyen
    Takahata, Tomoyuki
    Shimoyama, Isao
    2019 IEEE 32ND INTERNATIONAL CONFERENCE ON MICRO ELECTRO MECHANICAL SYSTEMS (MEMS), 2019, : 611 - 614
  • [25] Design and processing of a cost-effective piezoresistive MEMS cantilever sensor for medical and biomedical use
    Clausen, I.
    Moe, S. T.
    Vogl, A.
    JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2012, 22 (07)
  • [26] Trapezoidal cantilever density sensor based on MEMS technology
    Zhao, L.-B., 1600, Science Press (34):
  • [27] A trapezoidal cantilever density sensor based on MEMS technology
    Libo ZHAO
    Longqi XU
    Guiming ZHANG
    Yulong ZHAO
    Xiaopo WANG
    Zhigang LIU
    Zhuangde JIANG
    Journal of Zhejiang University-Science C(Computers & Electronics), 2013, 14 (04) : 274 - 278
  • [28] A MEMS Fluid Density Sensor Based on Trapezoidal Cantilever
    Zhao, Libo
    Huang, Enze
    Zhang, Guiming
    Zhao, Yulong
    Wang, Xiaopo
    Jiang, Zhuangde
    Liu, Zhigang
    MEMS/NEMS NANO TECHNOLOGY, 2011, 483 : 374 - +
  • [29] Trace Gas Sensor Based on MEMS Cantilever Resonator
    Ying, Dong
    Wei, Gao
    Zheng, You
    MANUFACTURING SCIENCE AND TECHNOLOGY, PTS 1-8, 2012, 383-390 : 3115 - 3120
  • [30] A trapezoidal cantilever density sensor based on MEMS technology
    Li-bo Zhao
    Long-qi Xu
    Gui-ming Zhang
    Yu-long Zhao
    Xiao-po Wang
    Zhi-gang Liu
    Zhuang-de Jiang
    Journal of Zhejiang University SCIENCE C, 2013, 14 : 274 - 278
12345