EFFECTS OF ALLOYING ELEMENTS ON CREEP PROPERTIES OF 9Cr-1Mo TYPE STEELS: (STUDY ON DEVELOPMENT OF 9Cr-1Mo TYPE STEELS - 2).

被引：0
|
作者：
Tokuno, K. [1 ]
Hashimoto, K. [1 ]
Takeda, T. [1 ]
Yamaba, R. [1 ]
Gokyu, H. [1 ]
机构：
[1] Nippon Steel Corp, Sagamihara, Jpn, Nippon Steel Corp, Sagamihara, Jpn
来源：
Transactions of the Iron and Steel Institute of Japan | 1987年 / 27卷 / 07期
关键词：
IRON AND STEEL METALLOGRAPHY - Microstructures - STEEL - Additives - STEEL HEAT TREATMENT - Annealing;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
This paper describes the results of investigation on the effects of the amounts of C, Si and N on creep properties of the ASTM A387-91 steel (ORNL-type Mod. 9Cr-1Mo steels). The creep ductilities of nearly all the specimens exceeded the lower limit value 75% of reduction of area of ruptured specimens which is recommended in the ORNL report. The results obtained in this report, together with those of microstructure observation and low-speed high-temperature tensile tests, can be rationally explained from the stand-points of precipitation and solution hardening.
引用
收藏
相关论文
共 50 条
  • [21] Correlation between microstructural evolution and creep response in 9Cr-1Mo and 9Cr-1Mo-NbVW heat-resistant steels
    Di Gianfrancesco, A
    Tassa, O
    Spigarelli, S
    MODELLING OF MICROSTRUCTURAL EVOLUTION IN CREEP RESISTANT MATERIALS, 1999, (03): : 161 - 176
  • [22] Creep deformation in a modified 9Cr-1Mo steel
    Anderson, P
    Bellgardt, T
    Jones, FL
    MATERIALS SCIENCE AND TECHNOLOGY, 2003, 19 (02) : 207 - 213
  • [23] Creep behavior and microstructure evaluation of welded joint in dissimilar modified 9Cr-1Mo steels
    Liu, Wen
    Liu, Xia
    Lu, Fenggui
    Tang, Xinhua
    Cui, Haichao
    Gao, Yulai
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 644 : 337 - 346
  • [24] Investigation of thermal effects on mechanical properties of 9Cr-1Mo to 9Cr-1Mo welded joints for high-temperature applications
    Karthik, S.
    Logesh, K.
    Vasudevan, A.
    Subramani, K.
    INTERNATIONAL JOURNAL OF AMBIENT ENERGY, 2020, 41 (05) : 582 - 587
  • [25] Measurement of microstructure changes in 9Cr-1Mo and 2.25Cr-1Mo steels using an electromagnetic sensor
    Liu, J.
    Hao, X. J.
    Zhou, L.
    Strangwood, M.
    Davis, C. L.
    Peyton, A. J.
    SCRIPTA MATERIALIA, 2012, 66 (06) : 367 - 370
  • [26] Influence of carbon content on transformation behaviour of austenite in 9Cr-1Mo steels
    Mater Sci Technol, 6 (469):
  • [27] Investigation on Microstructures of Multipass Deposited Metal for 9Cr-1Mo Ferritic Steels
    Wang, H. H.
    Wu, K. M.
    MECHANICAL STRESS EVALUATION BY NEUTRONS AND SYNCHROTRON RADIATION, 2010, 652 : 270 - 274
  • [28] Influence of carbon content on transformation behaviour of austenite in 9Cr-1Mo steels
    Saroja, S
    Vijayalakshmi, M
    Raghunathan, VS
    MATERIALS SCIENCE AND TECHNOLOGY, 1997, 13 (06) : 469 - 476
  • [29] Effects of the initial metallurgical condition on the microstructure and mechanical properties of 9Cr-1Mo and 9Cr-1MoVNb thermal aged steels
    Alamo, A
    Brachet, JC
    Castaing, A
    Foucher, C
    MICROSTRUCTURES AND MECHANICAL PROPERTIES OF AGING MATERIALS II, 1996, : 121 - 134
  • [30] Creep behaviour of modified 9Cr-1Mo ferritic steel
    Choudhary, B. K.
    Samuel, E. Isaac
    JOURNAL OF NUCLEAR MATERIALS, 2011, 412 (01) : 82 - 89
12345