CALCULATION OF ROPE ENDURANCE WHETHER THE CAUSE MAY BE WEAR OR FATIGUE - PART 1.

被引：0

作者：

Wiek, Ir.L. ^{[1
]}

机构：

[1] TU Delft, Neth, TU Delft, Neth

来源：

Wire | 1988年 / 38卷 / 02期

关键词：

MINE HOISTS - Wire Rope;

D O I：

暂无

中图分类号：

TG [金属学与金属工艺];

学科分类号：

0805 ;

摘要：

It is thought that the steel wire rope might have been invented as a solution for the fatigue fractures in chain links which occurred around 1825. At the time these chains were used in mines for lifting purposes. The author reviews the formulas regarding the calculation of wire rope endurance with bending fatigue. Critical comments are provided regarding each formula.

引用

页码：218 / 220

共 50 条

[31] Micromechanical aspects of fatigue in a MIG welded aluminium airframe alloy - Part 1. Microstructural characterization
Lefebvre, F
Ganguly, S
Sinclair, I
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 397 (1-2): : 338 - 345
[32] Rolling contact fatigue life of finish hard machined surfaces Part 1. Model development
Choi, Youngsik
Liu, C. Richard
WEAR, 2006, 261 (5-6) : 485 - 491
[33] Nonlocalized fatigue damage of metals and alloys. Part 1. Inelasticity, investigation methods, and results
Troshchenko V.T.
Strength of Materials, 2005, 37 (4) : 337 - 356
[34] Characterisation of Zircaloy corrosion fatigue phenomena in an iodine environment. Part 1. Crack growth
Schuster, Isabelle, 1600, (166):
[35] Relaxation of a dewetting contact line. Part 1. A full-scale hydrodynamic calculation
Snoeijer, Jacco H.
Andreotti, Bruno
Delon, Giles
Fermigier, Marc
JOURNAL OF FLUID MECHANICS, 2007, 579 : 63 - 83
[36] THE STUDY OF CONTACT PROBLEM BETWEEN RAIL AND WHEEL .1. EFFECT OF WHEEL PROFILE ON WEAR AND FATIGUE BEHAVIOR OF RAIL
SATO, M
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1985, 71 : 1553 - 1553
[37] THE STUDY OF CONTACT PROBLEM BETWEEN RAIL AND WHEEL .1. EFFECT OF WHEEL PROFILE ON WEAR AND FATIGUE BEHAVIOR OF RAIL
SATO, M
KAGEYAMA, H
SUGINO, K
TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 26 (06) : B227 - B227
[38] Fine-crack mechanics in fatigue calculations. Part 1. Fatigue resistance in smooth steel specimens in tension-compression
Khazhinskii G.M.
Chemical and Petroleum Engineering, 2006, 42 (5-6) : 282 - 290
[39] Calculation of qualitative and quantitative composition of Estonian oil shale and its combustion products. Part 1. Calculation on the basis of heating value
Arro, H
Prikk, A
Pihu, T
FUEL, 2003, 82 (18) : 2179 - 2195
[40] Three-dimensional potential flow calculation in turbomachinery impeller. Part 1. Problem statement, flow model, calculation methods
Dundur, E.A.
Zharkovskij, A.A.
Shkarbul', S.N.
Khimicheskoe I Neftegazovoe Mashinostroenie, 1995, (11): : 41 - 45

← 1 2 3 4 5 →