Effect of (PE-MA)-g-PA6 on the compatibilization, morphology and properties of PA6/EPDM blends

被引：0
|
作者：
Song, Hong [1 ]
Meng, Yuezhong [1 ]
Zhang, Guohong [1 ]
Liang, Wei [1 ]
Huang, Baotong [1 ]
Feng, Zhiliu [1 ]
机构：
[1] Dalian Univ of Technology, Dalian, China
来源：
Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering | 1993年 / 9卷 / 05期
关键词：
Grafting (chemical) - Mechanical properties - Morphology - Organic polymers - Polymer blends;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The effect of the amount of PE-MA used on the compatibilization, morphology and mechanical properties of the blends was studied. It was found that when the composition of PA6/EPDM/PE-MA is 80/20/12, the Izod impact strength of the dry specimens under room temperature is 13 times of that of pure PA6, while the dispersed EPDM particles become much smaller and the sharp boundary between the two phases is blurred and dispersed. The effect of compatibilization of PE-MA is much better than that of PP-MA.
引用
收藏
页码：106 / 111
相关论文
共 50 条
  • [41] Effect of the processing method on the mechanical properties and morphology of compatibilized PA6/LDPE blends
    Agrawal, Pankaj
    Araujo, Edcleide M.
    Melo, Tomas J. A.
    JOURNAL OF MATERIALS SCIENCE, 2008, 43 (13) : 4443 - 4449
  • [42] Effect of the processing method on the mechanical properties and morphology of compatibilized PA6/LDPE blends
    Pankaj Agrawal
    Edcleide M. Araújo
    Tomás J. A. Mélo
    Journal of Materials Science, 2008, 43 : 4443 - 4449
  • [43] Effects of mixing protocol on morphology and properties of PA6/ABS blends compatibilized with MMA-MA
    Castro, L. D. C.
    Oliveira, A. D.
    Kersch, M.
    Altstadt, V.
    Pessan, L. A.
    JOURNAL OF APPLIED POLYMER SCIENCE, 2016, 133 (27)
  • [44] Effect of LDPE-g-MA as a compatibilizer for LDPE/PA6 blend on the phase morphology and mechanical properties
    A. A. El-Wakil
    H. Moustafa
    A. Abdel-Hakim
    Polymer Bulletin, 2022, 79 : 2249 - 2262
  • [45] Repurposing ABS to Produce Polyamide 6 (PA6)-Based Blends: Reactive Compatibilization with SAN-g-MA of a High Degree of Functionalization
    Torquato, Jonathan Vinicius Moreira
    Luna, Carlos Bruno Barreto
    dos Santos Filho, Edson Antonio
    do Nascimento, Emanuel Pereira
    de Melo, Tomas Jeferson Alves
    Wellen, Renate Maria Ramos
    Araujo, Edcleide Maria
    Morais, Dayanne Diniz de Souza
    POLYMERS, 2024, 16 (22)
  • [46] Effect of LDPE-g-MA as a compatibilizer for LDPE/PA6 blend on the phase morphology and mechanical properties
    El-Wakil, A. A.
    Moustafa, H.
    Abdel-Hakim, A.
    POLYMER BULLETIN, 2022, 79 (04) : 2249 - 2262
  • [47] Crystal Morphology and Thermal Properties of PA6/PP-g-MAH/POE Blends
    Run, Ming-tao
    Zhou, Wen
    Xing, Bing-tao
    Yao, Meng
    ADVANCED RESEARCH ON MATERIAL ENGINEERING, ARCHITECTURAL ENGINEERING AND INFORMATIZATION, 2012, 366 : 314 - 317
  • [48] Rheology, Morphology and Mechanical Properties of PA6/PP-g-MAH/POE Blends
    Run, Ming-tao
    Yao, Meng
    Xing, Bing-tao
    Zhou, Wen
    ADVANCED RESEARCH ON MATERIAL ENGINEERING, ARCHITECTURAL ENGINEERING AND INFORMATIZATION, 2012, 366 : 310 - 313
  • [49] Crystallisation behaviour of HDPE in PA6/EPDM-g-MA/HDPE ternary blend with different phase morphology
    Dou, R.
    Wang, W.
    Zhou, Y.
    Gong, L.
    Yin, B.
    Yang, M. -B.
    Xie, B. -H.
    PLASTICS RUBBER AND COMPOSITES, 2016, 45 (05) : 207 - 215
  • [50] Reactive compatibilization of melt mixed PA6/SWNT composites:: Mechanical properties and morphology
    Bhattacharyya, AR
    Pötschke, P
    Haussler, L
    Fischer, D
    MACROMOLECULAR CHEMISTRY AND PHYSICS, 2005, 206 (20) : 2084 - 2095
12345