Effect of (PE-MA)-g-PA6 on the compatibilization, morphology and properties of PA6/EPDM blends

被引：0
|
作者：
Song, Hong [1 ]
Meng, Yuezhong [1 ]
Zhang, Guohong [1 ]
Liang, Wei [1 ]
Huang, Baotong [1 ]
Feng, Zhiliu [1 ]
机构：
[1] Dalian Univ of Technology, Dalian, China
来源：
Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering | 1993年 / 9卷 / 05期
关键词：
Grafting (chemical) - Mechanical properties - Morphology - Organic polymers - Polymer blends;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The effect of the amount of PE-MA used on the compatibilization, morphology and mechanical properties of the blends was studied. It was found that when the composition of PA6/EPDM/PE-MA is 80/20/12, the Izod impact strength of the dry specimens under room temperature is 13 times of that of pure PA6, while the dispersed EPDM particles become much smaller and the sharp boundary between the two phases is blurred and dispersed. The effect of compatibilization of PE-MA is much better than that of PP-MA.
引用
收藏
页码：106 / 111
相关论文
共 50 条
  • [31] Compatibilization of maleic anhydride grafted elastomers in PP/PA6 blends
    Department of Chemical Engineering and Material, Dalian Institute of Light Industry, Dalian 116034, China
    不详
    Hecheng Shuzhi Ji Suliao, 2006, 6 (12-15):
  • [32] Characterization of PA6/EPDM-g-MA/HDPE ternary blends: The role of core-shell structure
    Li, Lan-peng
    Yin, Bo
    Zhou, Yan
    Gong, Lei
    Yang, Ming-bo
    Xie, Bang-hu
    Chen, Chen
    POLYMER, 2012, 53 (14) : 3043 - 3051
  • [33] "Compatibilization" through Elongational Flow Processing of LDPE/PA6 Blends
    Mistretta, Maria Chiara
    Morreale, Marco
    Botta, Luigi
    Ceraulo, Manuela
    Fontana, Paolo
    La Mantia, Francesco Paolo
    MATERIALS, 2018, 11 (12)
  • [34] Structure and properties of PA6/PLA blends
    Wang, Yu-Ling
    Li, Hai
    Dai, Kun
    Li, Zhong-Ming
    Ji, Xu
    Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering, 2010, 26 (03): : 61 - 64
  • [35] Effects of compatibilizer EAA on morphology and properties of PA6/POE blends
    Li, Xiao-Mei
    Wang, Lei
    Wu, De-Zhen
    Wu, Li-Feng
    Zhongguo Suliao/China Plastics, 2001, 15 (12):
  • [36] Compatibilization of PA6/ABS blend by SEBS-g-MA: morphological, mechanical, thermal, and rheological properties
    Essabir, H.
    El Mechtali, F. Z.
    Nekhlaoui, S.
    Raji, M.
    Bensalah, M. O.
    Rodrigue, D.
    Bouhfid, R.
    Qaiss, A.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 110 (3-4): : 1095 - 1111
  • [37] Multinanolayered PA6/Cloisite and PE/PA6/Cloisite composites: Structure, mechanical and barrier properties
    Marais, Stephane
    Lozay, Quentin
    Follain, Nadege
    Soulestin, Jeremie
    Couvrat, Nicolas
    Dargent, Eric
    COMPOSITES PART B-ENGINEERING, 2024, 271
  • [38] Investigation of the properties of PA6/PA610 blends and glass fiber reinforced PA6/PA610 composites
    Artykbaeva, Elnura
    Durmaz, Bedriye Ucpinar
    Aksoy , Pelin
    Aytac, Ayse
    POLYMER COMPOSITES, 2022, 43 (10) : 7514 - 7525
  • [39] Compatibilization of PA6/ABS blend by SEBS-g-MA: morphological, mechanical, thermal, and rheological properties
    H. Essabir
    F. Z. El Mechtali
    S. Nekhlaoui
    M. Raji
    M. O. Bensalah
    D. Rodrigue
    R. Bouhfid
    A. Qaiss
    The International Journal of Advanced Manufacturing Technology, 2020, 110 : 1095 - 1111
  • [40] Effect of PA6 addition on the mechanical properties of PMMA blends
    Li, Zhenhua
    MATERIALS AND DESIGN, PTS 1-3, 2011, 284-286 : 509 - 512
12345