Vacuum sealing casting under pressure anlnnovative process for iron casting

被引：0

作者：

Li, C.-X. ^{[1
]}

Wu, C.-J. ^{[1
]}

Hu, H.-Q. ^{[1
]}

机构：

[1] School of Materials and Metallurgy, Northeastern University, Shenyang 110004, China

来源：

Dongbei Daxue Xuebao/Journal of Northeastern University | 2001年 / 22卷 / 03期

关键词：

Cast iron - Compression molding - Compressive strength - Filling - Metal melting - Pressure effects;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

A new casting process has been developed. The vacuum sealing casting under pressure was applied for the ferrous castings of thin wall, high precision and smooth surface. The experimental results show that the mould of the vacuum sealing casting under pressure has very high compress strength which is higher than 650 kPa, the compress strength is 3 ∼ 4 times as high as that of the moulds of high pressure molding and V-processing. Because a larger minus pressure is formed in the cavity during filling, the melt metal has a very excellent filling ability due to the suck effect in the new casting process.

引用

页码：319 / 322

共 50 条

[41] POSSIBILITIES OF PRESSURE DIE CASTING OF IRON ALLOYS
Ruzbarsky, Juraj
Sitko, Jacek
MANAGEMENT SYSTEMS IN PRODUCTION ENGINEERING, 2019, 27 (04) : 199 - 204
[42] Quiescent Pouring Process of Vacuum Sealed Molding Casting
Li, Guohui
Lin, Hongqi
Yang, Yang
MATERIALS PROCESSING TECHNOLOGY II, PTS 1-4, 2012, 538-541 : 1084 - 1087
[43] VACUUM PROCESS LOWERS INVESTMENT CASTING COSTS.
Van Cleave, David A.
1600, (218):
[44] THE VACUUM CASTING OF URANIUM
STEPHENSON, J
JOURNAL OF THE INSTITUTE OF METALS, 1959, 87 (06): : 174 - 180
[45] Vacuum casting specialists
不详
MATERIALS WORLD, 2000, 8 (05) : 9 - 9
[46] Defects in high pressure die casting process
Podprocká, Radka
Malik, Jozef
Bolibruchová, Dana
Manufacturing Technology, 2015, 15 (04): : 674 - 678
[47] Full Through Process Simulation for Low Pressure Die Casting - From Casting to Design
Horr, Amir M.
Angermeier, Christoph
Harrison, Angela
Aluminium Alloys 2014 - ICAA14, 2014, 794-796 : 118 - 123
[48] A study of thin-walled ZL105A casting manufactured by vacuum differential pressure casting
Zhan Shuai
Song Jingtao
Ding Minghui
Jin Guo
Liu Honghui
PROCEEDINGS OF THE 2017 2ND INTERNATIONAL CONFERENCE ON CIVIL, TRANSPORTATION AND ENVIRONMENTAL ENGINEERING (ICCTE 2017), 2017, 135 : 574 - 582
[49] New developments for vacuum preparation and casting according to the automatic pressure gelation process at elevated temperatures
Mais, G
PROCEEDINGS: ELECTRICAL INSULATION CONFERENCE AND ELECTRICAL MANUFACTURING & COIL WINDING CONFERENCE, 1997, : 15 - 22
[50] Casting process simulation of casting deformation for an aluminum die casting
Rosbrook, C
Andersen, S
Heisser, C
Hattel, J
ADVANCES IN ALUMINUM CASTING TECHNOLOGY, 1998, : 95 - 97

← 1 2 3 4 5 →