EFFECT OF HEAT TREATMENT AND METALLURGICAL STRUCTURE ON DECARBURIZATION BEHAVIOR OF 2 one quarter Cr-1Mo STEEL IN HIGH TEMPERATURE SODIUM.

被引：0
|
作者：
Moroishi, Taishi
Shida, Yoshiaki
机构：
来源：
Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals | 1976年 / 40卷 / 11期
关键词：
STEEL HEAT TREATMENT;
D O I：
10.2320/jinstmet1952.40.11_1184
中图分类号：
学科分类号：
摘要：
The effect of heat treatment and metallurgical structure on the decarburization behavior of the 2 one quarter Cr-1Mo steel in sodium was studied. Fourteen kinds of heat treatment were performed on 2 one quarter Cr-1Mo steel sheets in order to obtain almost all the possible metallurgical structures. Heat treatment condition was found to affect the decarburization rate of 2 one quarter Cr-1Mo steel in sodium, especially in the lower test temperatures. The decarburization rate seems to be controlled by the dissolution process of carbides and, accordingly, is related to the stability of carbides. Dissolution of M//3C is rapid and is considered to be controlled by carbon diffusion in the dissolution process.
引用
收藏
页码：1184 / 1192
相关论文
共 50 条
  • [31] HYDROGEN ATTACK LIMIT OF 2 one quarter Cr-1 Mo STEEL.
    Masaoka, Isao
    Kinoshita, Kazuhisa
    Chiba, Ryuichi
    Fujii, Tadaomi
    Imanaka, Takuichi
    Otoguro, Yasuo
    Kihara, Shigemitsu
    Miyaji, Hirofumi
    Sakai, Tadamichi
    Mitsuo, Toshiharu
    Welding Research Council Bulletin, 1985, : 1 - 8
  • [32] HEAT TREATMENT CHARACTERISTICS OF HIGH STRENGTH 2 1/4CR-1MO STEEL
    SUSUKIDA, H
    TSUJI, I
    TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1971, 11 (04) : 285 - &
  • [33] FATIGUE CRACK GROWTH BEHAVIOUR OF 2 one quarter Cr1Mo STEEL TUBE AT ELEVATED TEMPERATURE.
    Bulloch, J.H.
    Buchanan, L.W.
    Res Mechanica: International Journal of Structural Mechanics and Materials Science, 1987, 20 (01): : 73 - 95
  • [34] EFFECT OF R-RATIO ON THE ELEVATED TEMPERATURE FATIGUE CRACK GROWTH BEHAVIOUR OF 2 one quarter Cr/Mo STEEL.
    Turner, S.
    Bulloch, J.H.
    1600, (31):
  • [35] Studies of the Effect of Heat Treatment on Hardness and Creep Behavior of a Modified 9Cr-1Mo Steel
    Wuthrich, Z.
    Shrestha, T.
    Charit, I.
    Rink, K.
    Basirat, M.
    Potirniche, G. P.
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2011, VOL 8, 2012, : 395 - 401
  • [36] SEGREGATION EFFECTS ON INTERGRANULAR CREEP CAVITATION AND FRACTURE-BEHAVIOR IN 2-1/4 CR-1MO STEEL
    FRANZONI, U
    GORETZKI, H
    STURLESE, S
    SCRIPTA METALLURGICA, 1982, 16 (10): : 1127 - 1132
  • [37] DEVELOPMENT OF Al-B TREATED, NORMALIZED TYPE HEAVY THICK 2 one quarter CR-1Mo STEEL PLATES WITH LOW SUSCEPTIBILITY TO TEMPER EMBRITTLEMENT.
    Ohtani, Hiroo
    Nakanishi, Mutsuo
    Watanabe, Seiichi
    Nakamura, Atsushi
    Yoshinaga, Hisashi
    Miura, Kazuyoshi
    Nito, Noburaki
    Nakamura, Tsuyoshi
    Sumitomo Search, 1984, (29): : 21 - 36
  • [38] HYDROGEN ATTACK IN CR-MO STEELS .3. EFFECT OF SI, MN AND TI ON HYDROGEN ATTACK IN 2 1/4 CR-1MO STEEL
    TAKANO, T
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1984, 70 (13): : 1484 - 1484
  • [39] Electrochemical Behavior of Cr-Mo Steel Alloy in High Temperature Aqueous Sodium Chloride Solution
    Bayoumi, Fathy. M.
    Ghanem, W. A.
    Ateya, B. G.
    INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2006, 1 (05): : 258 - 267
  • [40] INTERFACE STRUCTURE AND ADHESION OF CHROMIUM CARBIDE FILM FORMED BY (C,CR) COMBINED DIFFUSION TREATMENT ON 2-1/4 CR-1MO ALLOY-STEEL
    ANRAKU, T
    TERANISHI, H
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1994, 80 (02): : 143 - 148
12345