EFFECT OF HEAT TREATMENT AND METALLURGICAL STRUCTURE ON DECARBURIZATION BEHAVIOR OF 2 one quarter Cr-1Mo STEEL IN HIGH TEMPERATURE SODIUM.

被引：0
|
作者：
Moroishi, Taishi
Shida, Yoshiaki
机构：
来源：
Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals | 1976年 / 40卷 / 11期
关键词：
STEEL HEAT TREATMENT;
D O I：
10.2320/jinstmet1952.40.11_1184
中图分类号：
学科分类号：
摘要：
The effect of heat treatment and metallurgical structure on the decarburization behavior of the 2 one quarter Cr-1Mo steel in sodium was studied. Fourteen kinds of heat treatment were performed on 2 one quarter Cr-1Mo steel sheets in order to obtain almost all the possible metallurgical structures. Heat treatment condition was found to affect the decarburization rate of 2 one quarter Cr-1Mo steel in sodium, especially in the lower test temperatures. The decarburization rate seems to be controlled by the dissolution process of carbides and, accordingly, is related to the stability of carbides. Dissolution of M//3C is rapid and is considered to be controlled by carbon diffusion in the dissolution process.
引用
收藏
页码：1184 / 1192
相关论文
共 50 条
  • [21] Investigations on fracture behaviour of 21/4 Cr-1Mo steel at high temperature
    Mahanty, DK
    Kushwaha, HS
    Biswas, AR
    Chakravarty, JK
    Kulkarni, PG
    Mahajan, SC
    Kakodkar, A
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 1996, 49 (04): : 621 - 624
  • [22] ANALYSIS ON THE FAILURE OF BUTT WELD JOINT BETWEEN 2 one quarter CR-1Mo STEEL TUBE AND STAINLESS STEEL TUBE.
    Ohtomo, Akira
    Ohishibashi, Sadao
    Saiga, Yoshinori
    IHI Engineering Review (English Edition), 1977, 10 (02): : 17 - 24
  • [23] EFFECTS OF HEAT-TREATMENT ON DELTA-FERRITE IN A 12 CR-1MO STEEL
    WILCOX, RC
    CHIN, BA
    JOURNAL OF METALS, 1983, 35 (08): : A10 - A10
  • [24] KINETICS OF DECARBURIZATION OF 2 1/4 PERCENT CR-1 PERCENT MO STEEL IN SODIUM
    KRANKOTA, JL
    ARMIJO, JS
    NUCLEAR TECHNOLOGY, 1974, 24 (02) : 225 - 233
  • [25] Effect of Post-weld Heat-Treatment on Microstructure and Mechanical Behavior of Inconel 625 Overlay Cladding on 2.25 Cr-1Mo Steel
    Kongpuang, Manwika
    Chaideesungnoen, Sasirat
    Muangjunburee, Prapas
    Oo, Hein Zaw
    Janudom, Somjai
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2023, 77 (1) : 199 - 208
  • [26] SIMULATION TEST OF DISBONDING BETWEEN 2 one quarter Cr-1Mo STEEL AND OVERLAID AUSTENITIC STAINLESS STEEL BY ELECTROLYTIC HYDROGEN CHARGING TECHNIQUE.
    Matsuda, Fukuhisa
    Nakagawa, Hiroji
    Transactions of JWRI (Japanese Welding Research Institute), 1984, 13 (01): : 159 - 161
  • [27] Effect of Post-weld Heat-Treatment on Microstructure and Mechanical Behavior of Inconel 625 Overlay Cladding on 2.25 Cr-1Mo Steel
    Manwika Kongpuang
    Sasirat Chaideesungnoen
    Prapas Muangjunburee
    Hein Zaw Oo
    Somjai Janudom
    Transactions of the Indian Institute of Metals, 2024, 77 : 199 - 208
  • [28] Influence of residual copper in annealed and postweld heat treated 2-¼Cr-1Mo steel
    Bodnar, Richard L.
    Bramfitt, Bruce L.
    Cappellini, Raymond F.
    ASTM Special Technical Publication, 1989, (1042):
  • [29] PREVENTION OF THE TRANSVERSE CRACKS IN HEAVY SECTION BUTT WELDMENTS OF 2 one quarter Cr-1Mo STEEL THROUGH LOW TEMPERATURE POSTWELD HEAT TREATMENT - 2. CORRELATION BETWEEN HYDROGEN CONCENTRATION AND PRACTICAL WELDING CONDITIONS.
    Takahashi, Eiji
    Iwai, Kenji
    Horitsuji, Tsuyoshi
    Transactions of the Japan Welding Society, 1979, 10 (02): : 20 - 27
  • [30] TEMPER AND NEUTRON IRRADIATION EMBRITTLEMENT IN 2 one quarter Cr-1MO STEELS FOR PRESSURE VESSELS OF HIGH-TEMPERATURE GAS-COOLED REACTORS.
    Suzuki, Masahide
    Fukaya, Kiyoshi
    Kodaira, Tsuneo
    Oku, Tatsuo
    1600, (66):
12345