Influence of Austenite Deformation Patenting (Ausformpatenting) on the Mechanical Properties of Steel Wire.

被引：0
|
作者：
Pawelski, Oskar
Becker, Joerg
机构：
来源：
Archiv fuer das Eisenhuettenwesen | 1975年 / 46卷 / 01期
关键词：
PATENTING - THERMOMECHANICAL TREATMENT;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Two unalloyed steel wires with 2 to 2. 5 mm diameter were drawn twice before and during transformation of the metastable austenite in the patenting bath. Reduction rates were 20 to 150 m/min. and total reductions in cross section were 8. 9 to 35. 3%. The strength properties of the wires were increased, and toughness was unchanged or improved by the treatment. The strength values obtained were unchanged or improved by subsequent cold working; drawability remained unchanged.
引用
收藏
页码：19 / 25
相关论文
共 50 条
  • [41] Mechanical Properties of Hypereutectoid Steel with Microduplex (α plus θ) Structure Formed by Hot Deformation of Undercooled Austenite
    Li Longfei
    Chen Wei
    Yang Wangyue
    Sun Zuqing
    PRICM 7, PTS 1-3, 2010, 654-656 : 246 - +
  • [42] Effect of austenite-ferrite-repeating deformation on the mechanical properties of steel Q235
    Tang, D.
    Ren, X.P.
    Cui, G.C.
    Zhang, H.B.
    Beijing Keji Daxue Xuebao/Journal of University of Science and Technology Beijing, 2001, 23 (02):
  • [43] INFLUENCE OF TREATMENT CONDITIONS ON MECHANICAL-PROPERTIES OF MARAGING STEEL WIRE
    MALTSEVA, LA
    ZUBOV, VY
    STEEL IN THE USSR, 1973, 3 (10): : 870 - 872
  • [44] INFLUENCE OF HIGH-SPEED DRAWING ON MECHANICAL PROPERTIES OF STEEL WIRE
    VOLLMER, H
    ARCHIV FUR DAS EISENHUTTENWESEN, 1972, 43 (04): : 351 - &
  • [45] The Influence of Cooling Rate on Austenite Stability and Mechanical Properties in an Austenite-Ferrite Medium-Mn Steel
    Cai, Zhihui
    Zhang, Deliang
    Wen, Guangqi
    Ma, Lifeng
    Misra, R. D. K.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2021, 30 (11) : 7917 - 7925
  • [46] The Influence of Austenite Grain Size on the Mechanical Properties of Low-Alloy Steel with Boron
    Bialobrzeska, Beata
    Konat, Lukasz
    Jasinski, Robert
    METALS, 2017, 7 (01):
  • [47] Influence of Retained Austenite on the Mechanical Properties of Low Carbon Martensitic Stainless Steel Castings
    Tabatabae, Behnam Akhavan
    Ashrafizadeh, Fakhreddin
    Hassanli, Ali Morad
    ISIJ INTERNATIONAL, 2011, 51 (03) : 471 - 475
  • [48] INFLUENCE OF PATENTING OF ROLLED STOCK FROM ROLLING TEMPERATURE OR FOLLOWING SPECIAL REHEATING ON MECHANICAL PROPERTIES OF REINFORCING WIRE
    SHAPOVALOV, SI
    STYCHINS.L
    ALIMOV, VI
    NAGORNYI, LI
    STAL IN ENGLISH-USSR, 1966, (11): : 940 - +
  • [49] INFLUENCE OF DEFORMATION TEMPERATURE ON PROPERTIES OF AUSTENITE OF NICKEL STEELS
    BERNSHTE.ML
    BARAZ, AR
    LAPTEV, DV
    PHYSICS OF METALS AND METALLOGRAPHY-USSR, 1971, 31 (02): : 195 - &
  • [50] INFLUENCE OF DEFORMATION HEAT ON MECHANICAL-PROPERTIES OF A STRUCTURAL-STEEL
    KOROPP, J
    KOCHENDORFER, A
    ARCHIV FUR DAS EISENHUTTENWESEN, 1978, 49 (04): : 195 - 200
12345