Influence of Austenite Deformation Patenting (Ausformpatenting) on the Mechanical Properties of Steel Wire.

被引：0
|
作者：
Pawelski, Oskar
Becker, Joerg
机构：
来源：
Archiv fuer das Eisenhuettenwesen | 1975年 / 46卷 / 01期
关键词：
PATENTING - THERMOMECHANICAL TREATMENT;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Two unalloyed steel wires with 2 to 2. 5 mm diameter were drawn twice before and during transformation of the metastable austenite in the patenting bath. Reduction rates were 20 to 150 m/min. and total reductions in cross section were 8. 9 to 35. 3%. The strength properties of the wires were increased, and toughness was unchanged or improved by the treatment. The strength values obtained were unchanged or improved by subsequent cold working; drawability remained unchanged.
引用
收藏
页码：19 / 25
相关论文
共 50 条
  • [21] AUSTENITE TRANSFORMATION AND STRUCTURE FORMATION DURING HIGH-CARBON AND COBALT STEEL WIRE PATENTING
    GRACHEV, SV
    SAVELYEV, VA
    POPOVA, LY
    FIZIKA METALLOV I METALLOVEDENIE, 1981, 52 (01): : 172 - 177
  • [22] Mechanical properties and deformation mechanisms of a novel austenite-martensite dual phase steel
    Xu, S. S.
    Li, J. P.
    Cui, Y.
    Zhang, Y.
    Sun, L. X.
    Li, J.
    Luan, J. H.
    Jiao, Z. B.
    Wang, X-L
    Liu, C. T.
    Zhang, Z. W.
    INTERNATIONAL JOURNAL OF PLASTICITY, 2020, 128 (128)
  • [23] PROPERTIES OF CONTINUOUSLY COOLED HIGH CARBON STEEL FOR PRESTRESSED CONCRETE WIRE.
    Guerrieri, A.
    Mascanzoni, A.
    Mazzucato, F.
    Wire Industry, 1983, 50 (06): : 313 - 319
  • [24] MATHEMATICAL MODEL OF HEAT FLOW AND AUSTENITE-PEARLITE TRANSFORMATION IN EUTECTOID CARBON STEEL RODS FOR WIRE.
    Agarwal, Prakash K.
    Brimacombe, J.K.
    Proceedings of the Society of Photo-Optical Instrumentation Engineers, 1979,
  • [25] INFLUENCE OF AUSTENITE INSTABILITY ON PROPERTIES OF STEEL
    CHARUSHN.GA
    GOLDSHTE.YE
    RUSSIAN METALLURGY-METALLY-USSR, 1970, (03): : 102 - &
  • [26] The Influence of Cooling Rate on Austenite Stability and Mechanical Properties in an Austenite–Ferrite Medium-Mn Steel
    Zhihui Cai
    Deliang Zhang
    Guangqi Wen
    Lifeng Ma
    R. D. K. Misra
    Journal of Materials Engineering and Performance, 2021, 30 : 7917 - 7925
  • [27] MICROSTRUCTURE-MECHANICAL PROPERTY RELATIONSHIPS OF DUAL-PHASE STEEL WIRE.
    Nakagawa, A.H.
    Thomas, G.
    Metallurgical transactions. A, Physical metallurgy and materials science, 1985, 16 A (05): : 831 - 840
  • [28] Mechanical and corrosion properties of a new beta-titanium orthodontic wire.
    Dickson, M
    Lacefield, W
    Maddox, L
    JOURNAL OF DENTAL RESEARCH, 2000, 79 : 595 - 595
  • [29] Influence of heat treatment on the structure and mechanical properties of chrome steel with unstable austenite
    Belomyttsev M.Y.
    Kozlov D.A.
    Kuz’ko E.I.
    Molyarov A.V.
    Nosirov T.N.
    Steel in Translation, 2017, 47 (5) : 299 - 303
  • [30] RESEARCH OF A NEW METHOD OF DEFORMATION - "PRESSING - DRAWING" ON MECHANICAL PROPERTIES OF STEEL WIRE
    Volokitin, Andrei
    Naizabekov, Abdrakhman
    Lezhnev, Sergey
    METAL 2013: 22ND INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2013, : 376 - 379
12345