Oxyfluorination of wood-fiber reinforced thermoplastic composites to improve adhesion

被引：0

作者：

Laborie, Marie-Pierre ^{[1
]}

Gupta, Barun ^{[2
]}

机构：

[1] Washington State University, Department of Civil and Environmental Engineering, Wood Materials and Engineering Laboratory, Pullman, WA, United States

[2] Department of Forest Resources, Pennsylvania State University, State College, PA, United States

来源：

Journal of Adhesion | 2008年 / 84卷 / 10期

关键词：

Oxyfluorination was evaluated on a series of wood-fiber reinforced thermoplastic composite (WPCs) formulations as a means to improve the adhesion of a water-based acrylic coating. The oxyfluorination increased the acrylic coating peel load to WPCs by 179%; yielding adhesion levels higher than those obtained on control maple. For oxyfluorinated surfaces; the WPC formulation had a significant impact on the acrylic coating paint. Formulations without maleic anhydride polypropylene coupling agent developed better adhesion than formulations with the coupling agent. Formulations with polypropylene also performed better than formulations with high density polyethylene and so did formulations with pine compared with those with maple. Interestingly; the adhesion improvement imparted by oxyfluorination was higher for those formulations that were least amenable to bonding with the acrylic coating; i.e; those containing the coupling agent and high density polyethylene. Contact angle measurements and ATR-FTIR spectroscopy indicated that oxyfluorination improved wettability with polar liquids by generating new oxygenated groups on the surface. A moderate positive linear relationship (r2 = 0.5) was established between the carbonyl/C-H stretch band intensity ratio I1650cm-1 /I2915cm-1 in the infrared spectra of oxyfluorinated WPCs and the coating peel strength. It is; therefore; proposed that oxyfluorination improves the adhesion properties of WPCs by oxidizing the surface; and by increasing wettability with polar liquids; thus allowing the development of stronger interfacial forces;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Journal article (JA)

引用

页码：830 / 846

共 50 条

[21] Wood-fiber composites build promising role in extrusion
Leaversuch, RD
MODERN PLASTICS, 2000, 77 (12): : 56 - +
[22] Flame retarding effects of nanoclay on wood-fiber composites
Guo, G.
Park, C. B.
Lee, Y. H.
Kim, Y. S.
Sain, M.
POLYMER ENGINEERING AND SCIENCE, 2007, 47 (03): : 330 - 336
[23] UV aging of poly(propylene)/wood-fiber composites
Seldén, R
Nyström, B
Långström, R
POLYMER COMPOSITES, 2004, 25 (05) : 543 - 553
[24] BP neural network model for predicting the mechanical performance of a foamed wood-fiber reinforced thermoplastic starch composite
Zeng, Guang Sheng
Hu, Can
Zou, Simin
Zhang, Li
Sun, Gang
POLYMER COMPOSITES, 2019, 40 (10) : 3923 - 3928
[25] Fiberboard composites from wood-fiber bonded with renewable wood resin
Sain, M. M.
Ghosh, A.
Banik, I.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2006, 25 (16) : 1701 - 1708
[26] Improved adhesion for thermoplastic polymers using oxyfluorination
Achereiner, F.
Muenstedt, H.
Zeiler, T.
PROCEEDINGS OF THE 17TH INTERNATIONAL VACUUM CONGRESS/13TH INTERNATIONAL CONFERENCE ON SURFACE SCIENCE/INTERNATIONAL CONFERENCE ON NANOSCIENCE AND TECHNOLOGY, 2008, 100
[27] Testing for material/engineering properties of wood and wood-fiber plastic composites.
Murphy, JF
ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1999, 217 : U247 - U248
[28] Characteristics of wood-fiber plastic composites made of recycled materials
Ashori, Alireza
Nourbakhsh, Amir
WASTE MANAGEMENT, 2009, 29 (04) : 1291 - 1295
[29] Mechanical properties of wood-fiber/toughened isotactic polypropylene composites
Park, BD
Balatinecz, JJ
POLYMER COMPOSITES, 1997, 18 (01) : 79 - 89
[30] PROPERTIES OF TRANSFER-MOLDED WOOD-FIBER POLYSTYRENE COMPOSITES
LIANG, BH
MOTT, L
SHALER, SM
CANEBA, GT
WOOD AND FIBER SCIENCE, 1994, 26 (03): : 382 - 389

← 1 2 3 4 5 →