Hydrogen storage properties of La1.8Ca0.2Mg14Ni3 alloy prepared by ball milling in different milling environments

被引：0
|
作者：
Gao, Linhui [1 ]
Chen, Changpin [1 ]
Chen, Lixin [1 ]
Wang, Qidong [1 ]
Wang, Changyao [1 ]
An, Yue [1 ]
机构：
[1] College of Materials Science and Chemical Engineering, Zhejiang University, Hangzhou, 310027, China
来源：
Journal of Alloys and Compounds | 2006年 / 424卷 / 1-2期
关键词：
The hydriding/dehydriding properties of the La1.8Ca0.2Mg14Ni3 alloy modified by mechanical ball milling for 20 h in different environment media; namely under argon; in toluene and in THF; respectively; have been investigated. XRD and SEM results show that the environment media affect the microstructure and surface morphology of the alloy noticeably. For the three environment media used; THF achieved the highest enhancement in hydriding/dehydriding properties. The effect of argon ranked the second and that of toluene the third. But the difference between the second and the third was very small. For the samples milled in THF; the amount of hydrogen absorbed reached 5.1 wt.% within 300 s at 600 K and 4.2 wt.% within 600 s at room temperature. The amount of hydrogen desorbed reached 5.05 wt.% at 613 K. The remarkable improvement of the hydrogen storage properties of the ball-milled alloy in different environment media experimented is ascribed to the physical and chemical change of the alloy surface. Most probably are due to the appearance of the active sites and the electron donor-acceptor (EDA) complexes produced by the ball-milling process. © 2006 Elsevier B.V. All rights reserved;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
下载
收藏
页码：338 / 341
相关论文
共 50 条
  • [1] Hydrogen storage properties of La1.8Ca0.2Mg14Ni3 alloy prepared by ball milling in different milling environments
    Gao, Linhui
    Chen, Changpin
    Chen, Lixin
    Wang, Qidong
    Wang, Changyao
    An, Yue
    JOURNAL OF ALLOYS AND COMPOUNDS, 2006, 424 (1-2) : 338 - 341
  • [2] Hydriding/dehydriding behaviors of La1.8Ca0.2Mg14Ni3 alloy modified by mechanical ball-milling under argon
    Gao, LH
    Chen, CP
    Chen, LX
    Wang, XH
    Zhang, JW
    Xiao, XZ
    Wang, QD
    JOURNAL OF ALLOYS AND COMPOUNDS, 2005, 399 (1-2) : 178 - 182
  • [3] Microstructure and hydrogen storage properties of La1.8Ca0.2Mg14Ni3 + x% Ti composites
    Zhejiang University, Hangzhou 310027, China
    Xiyou Jinshu Cailiao Yu Gongcheng, 2007, 5 (790-793):
  • [4] Microstructure and hydrogen storage properties of La1.8Ca0.2Mg14Ni3 + x% Ti composites
    Xiao Xuezhang
    Wang Xinhua
    Chen Lixin
    Li Shouquan
    Tang Ying
    Chen Changpin
    RARE METAL MATERIALS AND ENGINEERING, 2007, 36 (05) : 790 - 793
  • [5] Hydriding/dehydriding properties of La2Mg16Ni alloy prepared by ball milling in different milling environments
    Chi, HZ
    Chen, CP
    An, Y
    Ying, T
    Wang, XH
    JOURNAL OF ALLOYS AND COMPOUNDS, 2004, 373 (1-2) : 260 - 264
  • [6] Hydriding/dehydriding properties of La2Mg16Ni alloy prepared by ball milling in different milling environments
    Chi, H. (chihz@lycos.com), 1600, Elsevier Ltd (373): : 1 - 2
  • [7] Hydrogen storage performances of La-Sm-Mg-Ni alloy prepared by casting and ball milling
    Qi, Yan
    Zhang, Xin
    Zhang, Wei
    Li, Jun
    Yuan, Zeming
    Guo, Shihai
    Zhang, Yanghuang
    JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS, 2023, 174
  • [8] Effect of ball milling on hydrogen storage of Mg3La alloy
    董汉武
    欧阳柳章
    孙泰
    朱敏
    Journal of Rare Earths, 2008, (02) : 303 - 306
  • [9] Effect of ball milling on hydrogen storage of Mg3La alloy
    Dong Hanwu
    Ouyang Liuzhang
    Sun Tai
    Zhu Min
    JOURNAL OF RARE EARTHS, 2008, 26 (02) : 303 - 306
  • [10] Improved hydrogen storage thermodynamics and kinetics of La-Ce-Mg-Ni alloy by ball milling
    Qi, Yan
    Sheng, Peng
    Li, Jun
    Zhang, Xin
    Zhang, Wei
    Guo, Shihai
    Zhang, Yanghuan
    JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS, 2023, 179
12345