Physical, Morphological, Tensile, and Thermal Stability Characteristics of Novel Tinospora Cordifolia Natural Fiber

被引:1
|
作者
Hindi, Jamaluddin [1 ]
Muralishwara, K. [1 ]
Bhat, K. Subrahmanya [2 ]
Gurumurthy, B. M. [1 ]
Ibrahim, Ayman [1 ]
Shivaprakash, Y. M. [1 ]
机构
[1] Manipal Acad Higher Educ, Manipal Inst Technol, Dept Mech & Ind Engn, Manipal 576104, Karnataka, India
[2] Manipal Acad Higher Educ, Manipal Inst Technol, Dept Chem, Manipal, India
关键词
Tinospora cordifolia fiber; crystallinity; chemical composition; functional groups; surface morphology; single fiber tensile test; thermal stability; (sic)(sic)(sic)(sic); (sic)(sic)(sic); (sic)(sic)(sic)(sic)(sic)(sic)(sic); CELLULOSIC FIBER; BANANA PEDUNCLE; REINFORCEMENT; JUTE; PROPERTY; HEMP; FLAX;
D O I
10.1080/15440478.2024.2437539
中图分类号
TB3 [工程材料学]; TS1 [纺织工业、染整工业];
学科分类号
0805 ; 080502 ; 0821 ;
摘要
This article presents an analysis on the characterization of the natural fibers from the stem of Tinospora cordifolia plant/vine. Several characterizations/measurements were carried out on the water retted fibers to ascertain their properties. These included diameter and density measurements, X-ray Diffraction (XRD) analysis, chemical composition by gravimetric method, Scanning Electron Microscopy (SEM), Fourier Transform Infrared (FTIR) spectroscopy, single fiber tensile tests, and Thermogravimetric analysis (TGA). The fibers had an average diameter of 202 mu m and density of 0.6 g/cm3. The SEM images revealed a rough surface which highlights the potential for good adhesion with the polymer matrix. The Crystalline Index (C.I) and Crystallite Size (C.S) obtained from the XRD spectra were 60.19% and 2.56 nm, respectively. Amount of cellulose, hemicellulose, lignin, and extractives in the fiber were 65%, 12%, 17%, and 6%, respectively. FTIR analysis revealed the presence of major constituents of the natural fiber such as cellulose, hemicellulose, and lignin. The tensile strength, Young's modulus, and percentage elongation at break of the fiber were 484 +/- 100 MPa, 22 +/- 4 GPa, and 3.8 +/- 1%. The onset of thermal degradation (Tonset) and maximum thermal degradation (Tmax) temperatures were 259 degrees C and 368 degrees C, respectively. Mechanical and thermal properties of the fiber were satisfactory when compared with popular natural fibers. (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic). (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)/(sic)(sic), (sic)(sic)(sic)(sic)(sic)(sic). (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic),X(sic)(sic)(sic)(sic)(XRD)(sic)(sic),(sic)(sic)(sic)(sic)(sic)(sic)(sic),(sic)(sic)(sic)(sic)(sic)(sic)(sic)(SEM),(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(FTIR),(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(TGA). (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)202 mu m, (sic)(sic)(sic)0.6 g/cm3. SEM(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic), (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic). (sic)XRD(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(C.I)(sic)(sic)(sic)(sic)(sic)(C.S)(sic)(sic)(sic)60.19%(sic)2.56 nm. (sic)(sic)(sic)(sic)(sic)(sic),(sic)(sic)(sic)(sic),(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)65%,12%,17%(sic)6%. (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic), (sic)(sic)(sic)(sic),(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic). (sic)(sic)(sic)(sic)(sic)(sic)(sic),(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)484 +/- 100 MPa,22 +/- 4 GPa(sic)3.8 +/- 1%. (sic)(sic)(sic)(sic)(sic)(sic)(sic)(Tonset)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(Tmax)(sic)(sic)(sic)259 degrees C(sic)368 degrees C. (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic), (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic).
引用
收藏
页数:16
相关论文
共 50 条
  • [31] Rheological, thermal, and morphological characteristics of plasticized cellulose acetate composite with natural fibers
    Choi, JS
    Lim, ST
    Choi, HJ
    Hong, SM
    Mohanty, AK
    Drzal, LT
    Misra, M
    Wibowo, AC
    MACROMOLECULAR SYMPOSIA, 2005, 224 : 297 - 307
  • [32] Characteristics of thermoplastic sugar palm Starch/Agar blend: Thermal, tensile, and physical properties
    Jumaidin, R.
    Sapuan, S. M.
    Jawaid, M.
    Ishak, M. R.
    Sahari, J.
    INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES, 2016, 89 : 575 - 581
  • [33] A Study on Chemical Composition, Physical, Tensile, Morphological, and Thermal Properties of Roselle Fibre: Effect of Fibre Maturity
    Razali, Nadlene
    Salit, Mohd Sapuan
    Jawaid, Mohammad
    Ishak, Mohamad Ridzwan
    Lazim, Yusriah
    BIORESOURCES, 2015, 10 (01): : 1803 - 1823
  • [34] THERMAL, STABILITY, MORPHOLOGICAL, AND CONDUCTIVITY CHARACTERISTICS OF POLYPYRROLE PREPARED IN AQUEOUS-MEDIUM
    BISWAS, M
    ROY, A
    JOURNAL OF APPLIED POLYMER SCIENCE, 1994, 51 (09) : 1575 - 1580
  • [35] Experimental data for physical characteristics, fiber compositions, and tensile properties of nonwoven wipes and toilet papers
    Durukan, Serkan
    Karadagli, Fatih
    DATA IN BRIEF, 2020, 28
  • [36] Chitosan-Starch Films with Natural Extracts: Physical, Chemical, Morphological and Thermal Properties
    Lozano-Navarro, Jessica I.
    Diaz-Zavala, Nancy P.
    Velasco-Santos, Carlos
    Melo-Banda, Jose A.
    Paramo-Garcia, Ulises
    Paraguay-Delgado, Francisco
    Garcia-Alamilla, Ricardo
    Martinez-Hernandez, Ana L.
    Zapien-Castillo, Samuel
    MATERIALS, 2018, 11 (01):
  • [37] Multi-scale investigation of morphological, physical and tensile properties of flax single fiber, yarn and unidirectional fabric
    Aldroubi, Souher
    Kasal, Bohumil
    Yan, Libo
    Bachtiar, Erik Valentine
    COMPOSITES PART B-ENGINEERING, 2023, 259
  • [38] The Effects of Silanized Ultrafine Silica on the Curing Characteristics, Tensile Properties, and Morphological Study of Natural Rubber Compounds
    Idrus, Suhaida S.
    Ismail, H.
    Palaniandy, Samayamutthirian
    POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2011, 50 (01) : 1 - 7
  • [39] Engineering Lignocellulose Fibers with Higher Thermal Stability through Natural Fiber Welding
    Durkin, David P.
    Frank, Benjamin P.
    Haverhals, Luke M.
    Fairbrother, D. Howard
    De Long, Hugh C.
    Trulove, Paul C.
    MACROMOLECULAR MATERIALS AND ENGINEERING, 2019, 304 (06)
  • [40] Tensile Properties and Thermal Stability of Gamma Irradiated Epoxidized Natural Rubber Latex with the Presence of Sensitizer
    Chai, C. K.
    Ratnam, C. T.
    Abdullah, L. C.
    Yusoff, H. M.
    JOURNAL OF POLYMER MATERIALS, 2016, 33 (01): : 223 - 232