Physical, Morphological, Tensile, and Thermal Stability Characteristics of Novel Tinospora Cordifolia Natural Fiber

被引:1
|
作者
Hindi, Jamaluddin [1 ]
Muralishwara, K. [1 ]
Bhat, K. Subrahmanya [2 ]
Gurumurthy, B. M. [1 ]
Ibrahim, Ayman [1 ]
Shivaprakash, Y. M. [1 ]
机构
[1] Manipal Acad Higher Educ, Manipal Inst Technol, Dept Mech & Ind Engn, Manipal 576104, Karnataka, India
[2] Manipal Acad Higher Educ, Manipal Inst Technol, Dept Chem, Manipal, India
关键词
Tinospora cordifolia fiber; crystallinity; chemical composition; functional groups; surface morphology; single fiber tensile test; thermal stability; (sic)(sic)(sic)(sic); (sic)(sic)(sic); (sic)(sic)(sic)(sic)(sic)(sic)(sic); CELLULOSIC FIBER; BANANA PEDUNCLE; REINFORCEMENT; JUTE; PROPERTY; HEMP; FLAX;
D O I
10.1080/15440478.2024.2437539
中图分类号
TB3 [工程材料学]; TS1 [纺织工业、染整工业];
学科分类号
0805 ; 080502 ; 0821 ;
摘要
This article presents an analysis on the characterization of the natural fibers from the stem of Tinospora cordifolia plant/vine. Several characterizations/measurements were carried out on the water retted fibers to ascertain their properties. These included diameter and density measurements, X-ray Diffraction (XRD) analysis, chemical composition by gravimetric method, Scanning Electron Microscopy (SEM), Fourier Transform Infrared (FTIR) spectroscopy, single fiber tensile tests, and Thermogravimetric analysis (TGA). The fibers had an average diameter of 202 mu m and density of 0.6 g/cm3. The SEM images revealed a rough surface which highlights the potential for good adhesion with the polymer matrix. The Crystalline Index (C.I) and Crystallite Size (C.S) obtained from the XRD spectra were 60.19% and 2.56 nm, respectively. Amount of cellulose, hemicellulose, lignin, and extractives in the fiber were 65%, 12%, 17%, and 6%, respectively. FTIR analysis revealed the presence of major constituents of the natural fiber such as cellulose, hemicellulose, and lignin. The tensile strength, Young's modulus, and percentage elongation at break of the fiber were 484 +/- 100 MPa, 22 +/- 4 GPa, and 3.8 +/- 1%. The onset of thermal degradation (Tonset) and maximum thermal degradation (Tmax) temperatures were 259 degrees C and 368 degrees C, respectively. Mechanical and thermal properties of the fiber were satisfactory when compared with popular natural fibers. (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic). (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)/(sic)(sic), (sic)(sic)(sic)(sic)(sic)(sic). (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic),X(sic)(sic)(sic)(sic)(XRD)(sic)(sic),(sic)(sic)(sic)(sic)(sic)(sic)(sic),(sic)(sic)(sic)(sic)(sic)(sic)(sic)(SEM),(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(FTIR),(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(TGA). (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)202 mu m, (sic)(sic)(sic)0.6 g/cm3. SEM(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic), (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic). (sic)XRD(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(C.I)(sic)(sic)(sic)(sic)(sic)(C.S)(sic)(sic)(sic)60.19%(sic)2.56 nm. (sic)(sic)(sic)(sic)(sic)(sic),(sic)(sic)(sic)(sic),(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)65%,12%,17%(sic)6%. (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic), (sic)(sic)(sic)(sic),(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic). (sic)(sic)(sic)(sic)(sic)(sic)(sic),(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)484 +/- 100 MPa,22 +/- 4 GPa(sic)3.8 +/- 1%. (sic)(sic)(sic)(sic)(sic)(sic)(sic)(Tonset)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(Tmax)(sic)(sic)(sic)259 degrees C(sic)368 degrees C. (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic), (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic).
引用
收藏
页数:16
相关论文
共 50 条
  • [21] Physical, thermal, morphological, and tensile properties of cornstarch-based films as affected by different plasticizers
    Ibrahim, M. I. J.
    Sapuan, S. M.
    Zainudin, E. S.
    Zuhri, M. Y. M.
    INTERNATIONAL JOURNAL OF FOOD PROPERTIES, 2019, 22 (01) : 925 - 941
  • [22] Effects of collagen fiber addition on the combustion and thermal stability of natural rubber
    Weixing Xu
    Xintao Wu
    Qilin Wen
    Shuangyang Li
    Yongjiao Song
    Bi Shi
    Journal of Leather Science and Engineering, 2021, 3 (01) : 59 - 68
  • [23] Effects of collagen fiber addition on the combustion and thermal stability of natural rubber
    Xu W.
    Wu X.
    Wen Q.
    Li S.
    Song Y.
    Shi B.
    Journal of Leather Science and Engineering, 2 (1):
  • [24] CHARACTERISTICS OF THERMAL STABILITY OF OILS OF NATURAL BITUMENS AND CRUDE OILS
    Antipenko, Vladimir R.
    Bakanova, Olga S.
    Kashapov, Roman S.
    BULLETIN OF THE TOMSK POLYTECHNIC UNIVERSITY-GEO ASSETS ENGINEERING, 2019, 330 (05): : 152 - 160
  • [25] Physical and Thermal Properties of Novel Native Andean Natural Fibers
    Mori, Sandra
    Charca, Samuel
    Flores, Elena
    Savastano, Holmer, Jr.
    JOURNAL OF NATURAL FIBERS, 2021, 18 (04) : 475 - 491
  • [26] MORPHOLOGICAL CHARACTERISTICS OF EB TREATED KENAF FIBER AND MECHANICAL AND THERMAL PROPERTIES OF BIOCOMPOSITES
    Choi, Hae Young
    Lee, Jung Soon
    Han, Seong Ok
    86TH TEXTILE INSTITUTE WORLD CONFERENCE, VOL 4, CONFERENCE PROCEEDINGS, 2008, : 2270 - 2277
  • [27] Medium-term absorption kinetics and thermal stability analysis of hybrid fiber metal laminate and experimental investigations on its physical and tensile properties
    Kumar, Saravana M.
    Vasumathi, M.
    Begum, Rashia S.
    Pulikkalparambil, Harikrishnan
    Siengchin, Suchart
    Pruncu, Catalin, I
    POLYMER COMPOSITES, 2021, 42 (08) : 4155 - 4165
  • [28] Effect of novel sizing on the mechanical and morphological characteristics of natural fiber reinforced unsaturated polyester resin based bio-composites
    Mehta, G
    Mohanty, AK
    Misra, M
    Drzal, LT
    JOURNAL OF MATERIALS SCIENCE, 2004, 39 (08) : 2961 - 2964
  • [29] Effect of novel sizing on the mechanical and morphological characteristics of natural fiber reinforced unsaturated polyester resin based bio-composites
    G. Mehta
    A. K. Mohanty
    M. Misra
    L. T. Drzal
    Journal of Materials Science, 2004, 39 : 2961 - 2964
  • [30] Walikukun fiber as lightweight polymer reinforcement: physical, chemical, mechanical, thermal, and morphological properties
    Andoko, Andoko
    Gapsari, Femiana
    Prasetya, Riduwan
    Sulaiman, Abdul Mudjib
    Rangappa, Sanjay Mavinkere
    Siengchin, Suchart
    BIOMASS CONVERSION AND BIOREFINERY, 2025, 15 (01) : 1269 - 1281