Optimisation of machining parameters in high speed milling process of woven CFRP

被引：0
|
作者：
Ning H. [1 ]
Zheng H. [1 ]
Ma X. [2 ]
机构：
[1] School of Mechatronic Engineering, Southwest Petroleum University, Chengdu
[2] City College of Southwest University of Science and Technology, Sichuan Province, Mianyang
来源：
International Journal of Machining and Machinability of Materials | 2022年 / 24卷 / 05期
关键词：
average surface roughness; carbon fibre reinforced composite material; CFRP; milling force; milling processing; optimisation analysis;
D O I：
10.1504/ijmmm.2022.126593
中图分类号：
学科分类号：
摘要：
A new high-speed milling cutter was used to carry out the milling experiment of woven CFRP. The influence of feed speed, rotation speed, milling width and their interaction on the milling force and the average surface roughness of the workpiece was studied by using the analysis of variance method. Based on the results of the analysis of variance, the response surface method was used to establish prediction models of milling force and average surface roughness. Taking the maximum material removal rate as the optimisation target, and the milling force and average surface roughness as constraints, the genetic algorithm was used to optimise the milling parameters. The results showed that when the maximum allowable surface roughness is 0.50 μm, 0.65 μm and 0.8 μm, the material removal rate increases by 104.3%, 14.9% and 25.0%, which proves the validity of the optimised results. Copyright © 2022 Inderscience Enterprises Ltd.
引用
收藏
页码：358 / 369
页数：11
相关论文
共 50 条
  • [21] Optimization of Process Parameters in CFRP Machining with Diamond Abrasive Cutters
    Boudelier, Aude
    Ritou, Mathieu
    Garnier, Sebastien
    Furet, Benoit
    MODELLING OF MACHINING OPERATIONS, 2011, 223 : 774 - 783
  • [22] High Speed Machining for Enhancing the AZ91 Magnesium Alloy Surface Characteristics: Influence and Optimisation of Machining Parameters
    Marakini, Vikas
    Pai, Srinivasa P.
    Bhat, Uday K.
    Singh, Dinesh Thakur
    Achar, Bhaskar P.
    DEFENCE SCIENCE JOURNAL, 2022, 72 (01) : 105 - 113
  • [23] A system for optimising cutting parameters when planning milling operations in high-speed machining
    Alberti, M
    Ciurana, J
    Casadesús, M
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 168 (01) : 25 - 35
  • [24] Dimensional quality optimisation of high-speed CNC milling process with dynamic quality characteristic
    Yih-fong, T
    Ming-der, J
    ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, 2005, 21 (06) : 506 - 517
  • [25] High speed process damping in milling
    Sellmeier, V.
    Denkena, B.
    CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, 2012, 5 (01) : 8 - 19
  • [26] Effect of process parameters in the machining of Titanium alloy and high speed steel in powder mixed electrical discharge machining process
    Jeavudeen, S.
    Jailani, H. Siddhi
    Murugan, M.
    MATERIALS TODAY-PROCEEDINGS, 2020, 27 : 615 - 619
  • [27] Optimization strategy in end milling process for high speed machining of hardened die/mold steel
    Tang, Ying
    JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING, 2006, 13 (03): : 240 - 243
  • [28] Research of Cutter Geometric Parameter Effect on Machining Stability Area in High Speed Milling Process
    Wu, S.
    Jia, D. K.
    Liu, X. L.
    Jiang, Y. C.
    Li, Y. F.
    HIGH SPEED MACHINING, 2011, 188 : 150 - +
  • [29] Optimisation of cutting parameters for improving energy efficiency in machining process
    Hu Luoke
    Tang Renzhong
    Cai Wei
    Feng Yixiong
    Ma Xiang
    ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, 2019, 59 : 406 - 416
  • [30] THE DEPENDENCE OF 3D SURFACE ROUGHNESS PARAMETERS ON HIGH-SPEED MILLING TECHNOLOGICAL PARAMETERS AND MACHINING STRATEGY
    Torims, Toms
    Logins, Andris
    Castellano Rosado, Pedro
    Gutierrez, Santiago
    Torres, Rafael
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2014, VOL 2B, 2014,
12345